audi TT (my second car)

[goose]

just started in the morning with modeling, still much mistkakes in there....

[goose]

.

[goose]

.

[goose]

.

[g69]

pretty neat for a start...
so far so good!
keep it up! :)

[goose]

just wanted to test a car shader
lights are not done yet

[Chan]

Show us a wire 'cause what you need to understand is that the TT is a very round car and some of the spots are kinda flat on your model.. Can't really explain, if you show the wireframe I can draw some lines..

[goose]

.

[goose]

thanks for your help Chan

[Chan]

1 and 2 are lines that IMO should be cut.. And then, the vertexes that will appear in the place where the circles are, should be moved a little to the left, if you edit the mesh from the left viewport. And the little picture on the right is your mesh, viewed from the left viewport, the little black line is roughly the bluprint line, and as you can see, it is more rounder than the edges on your mesh.. So by cutting the polys I showed before, you can move the vertexes to the left so the edges would be more accurate and rounder as the TT is..

[goose]

thank you very much for your help!!!!

i will fix the problem..

[Chan]

Also, there is a way to render a mesh as a wire in 3DS Max.. You just apply a random material to a model and tick the "Wire" box in the Material Editor.. Then press F9 and voila!

[goose]

thanks ;-)

[Chan]

And one more thing.. You have to chamfer the edges that I have marked with red, 'cause as you can see from this (http://www.auto-evasion.com/fond-ecran/images/audi.jpg) ref. photo, they are sharp..

[goose]

its an audi tt of an friend of mine,its a little bit up the norm ;-)

this is my second car, there are still many mistakes in there,but i will fix them

[goose]

.

[goose]

.

[goose]

.

[Dr.N]

nice modeling ,

i like the first 2 pictures , but the last one ? no , i dont l