kater concept wip,...

[sabaman]

well, started several prjects which i all lost interest in, to finally be struck with modelers block,


which was good, it got me sketching again which finally got me modeling again,


and here it is, about 60% done, most work has to be done on the front so ill post a shot of that later :),...


http://sabaman.alfacom.org/wips/kater_wip5.jpg

[Yanik]

Hey Sabaman your model really looks great and clean, what else can we expect from you.

The only thingy i don't like that much is that "spoiler" above the backlights.

Me is curious to see how the end result will look like.

[[r3D]]

mmmm!!! that's just DELICIOUS!!!!!!

damn man, every car you make makes me more dumbstruck, it's just amazing!! you mount to a higher level with every car you make, AS IF YOU DIDN'T KNOW ENOUGH TO START WITH!!!!! i envy you man :D

this thing is stunning btw, fresh design, everything looks coo, just make us a PROPER INTERIOR for once :D :p

oh and throw us a 3/4 front angle as well :)

latazzz [r3D]

[USED]

yeah sabaman, I love your cars, your my hero ;)
the modeling is just great, ur a rhino master for sure...
but I have to say I dilike the back of this car, the style that is, but I think that is just a personal problem LOL
show us the front...

[Ferry P]

I agree with all the comments....don't like the back myself either.
but the rest is superb

[sabaman]

hhmmmmm, the spoiler,


if you ask me its just a bad angle,

and im too far too change it (stupid rhino nurbs)

well, i can change it but its a ****load of work, plus i like the spoiler :)

hehe, im finally getting back to this car, ill post some more shots later on today,


thanks for the feedback guys,....

[legato]

awesome work as always sabaman...and yeah i do agree with the others about the rear end... anyhow just curious...did u build the tires in rhino?.. how?..any tutorials?

keep up the good work man

[sabaman]

well, the bottom line is arraying a shape around tyre bout 30 times, thas about it, dont know of any tutorial but its easer than it looks,...

[sabaman]

update, finally got to work on the front,


http://sabaman.alfacom.org/wips/kater_wip9.jpg

[Chan]

I don't like the front..

[[r3D]]

one word:

DAAAAAAAAAAAAAAAAYUUUUUMN

[sabaman]

chan, i guess thas too bad, thanks for the input,


r3, thanks man,



gi renders,...

http://sabaman.alfacom.org/wips/kater_wipgi1.jpg
http://sabaman.alfacom.org/wips/kater_wipgi2.jpg

[Chan]

I meant that for me it doesn't look like the front goes together with the whole style of the car..

[[r3D]]

I Bow Down to Your Brilliance, Sabino Leerentveld,


BECAUSE YOU'RE THE BEST EVER RHINO MODELER!!!!!!!!!!!!! once again, DAAAAAAAAAYYYYYYUUUUUUMNN!!!!

(btw: the gi renders are better than the rhino viewport ;) lol)

[Ferry P]

wow...i don't dislike the back no more...it looks cool with the rest of the car.
But now I don't like the front too much.
(dutch) het ziet er een beetje te "lomp" uit..dat wat ik heb aangegeven...de rest van de voorkant is cool"

[figo]

sabaman finish the car it looks good, nice modelling wtf can I say :P

and those who dont like it say it once and shut up..its his thread and its his car dont like it ?

DONT POST ****

damn

[slavke]

it looks like you are really talented in designing stuff, I have seen your previous cars, you really got good style and I like it, there are of course always few things that you can improve on like for example you got sharp edges accross the side of the car and it is on most of the cars the same thing. I think you should go with a bit smoother edges...also like someone before me said the front needs a bit better design..but back is apsolutly great. I got a question for ya. Do you draw your cars before you model them ..cause if you do I would be interested to see how good you can draw. Keep us updated...great job!!!

[Ferry P]

Originally posted by figo
sabaman finish the car it looks good, nice modelling wtf can I say :P

and those who dont like it say it once and shut up..its his thread and its his car dont like it ?

DONT POST ****

damn

need some ritalin?

[Chan]

Originally posted by figo
sabaman finish the car it looks good, nice modelling wtf can I say :P

and those who dont like it say it once and shut up..its his thread and its his car dont like it ?

DONT POST ****

damn

Ok.. So when people ask for comments or critique, we are only allowed to praise the car?

[sabaman]

ef, imma see what and if i can do something bout it,


figo, lol, thanks man,

slavke, ive attached the sketch, you will noticed that the overall design is the same but alot has changed,

hmmmm, smoother edges, you know, mostly in renders the edges hardly visible thats why i make em very easy, but in my next models ill pay more attention to it, thanks man,

now guys, lets not make this a flaming thread :)....

http://sabaman.alfacom.org/sketches/sketch7.jpg

[slavke]

see I could sensed it that you are preety good in drawing.. Thats a really nice scetch you got there. Keep up the good work.

[sabaman]

thanks alot man,...

[slavke]

eh man I got to ask you for a favour...can you post a close up screenshot of the mesh like shown on this picture below. I always get problems getting this part of the cars smooth as yours...it screws it up everytime I sharpen the edges..when bumped inside mesh joins with the outside...really tricky part for me.

[sabaman]

well, i can post a mesh, however this is all rhino nurbs so it has nothing to do with smoothing,...

[sabaman]

so the model is done,


i refused to make a new interior, requires too much of my poor cpu and im just lazy hehe so dont pay attention to it,

will post the final renders tomorrow, hopefully,...


http://sabaman.alfacom.org/gallery/kater_final1.jpg
http://sabaman.alfacom.org/gallery/kater_final2.jpg

[slavke]

thats much much better now, its funny how everycar when you put just a bit more detail to it makes it look much better. I like your touch on the lights. Great job man I just wish I know rhino as good as I know 3D max. Can't wait to see the textures on.

[madm4tt]

Great Job Man BRAVO... the details are amazing.

Bye, see U next CAR.

[RafG]

I love all ur works

U must tell me how to make holes on a mesh, like holes in wheel disc...

Thank u
bye

[ShinDig]

LOVELY, looks great dude. I wasn't sure about the front either, but you have done such a nice job on the back and sides, that i thought i would only post when it looks more finshed, and i am glad i did, because i love the front of the car now.

What i really like is in certain bits i think you can see small things that look alittle bit like a couple of super cars on the road now, but then you take it in a whole different direction!!

Do you design cars for a living??
If not you should look into it dude, i think you could do very well out of it, you have a great talent!!

p.s damn i love clay renders!!:cool:

[sabaman]

thanks alot guys (and girls if any)

rafG, do you mean the holes in the breakdisc, if so, they are just booleaned out, or do you mean the spokes of the rims, cuz those are just splitted out, extrude and a small fillet,

Shindig, i dont design cars for a living, however, ofcourse i hope to do that some time, thanks alot man,...

[figo]

where are those crit. guys :P LOL


nice work man its just amazing :D