Speed Modelling Challenge 89 - Entertainment Center

[Marty_McFly-3DT]

The rules are simple

1, Each week we'll post a subject for you to model along with a time limit on how long you should spend on it. Spend no longer than the allocated time then post a render of your model. No cheating, we are relying on your honesty here and the idea of speed modelling is to simulate a "real world" environment. If you are working on a project and asked to show a concept model you'll need to be able to get somewhere near the target in the allocated time. Your submission should be a model created especially for this challenge and not one you have stored on your hard drive.

How you interpret the brief is up to you as long as the final model conforms to what we have asked for. Any images of models that do not match the brief will be removed and the poster disqualified

2, You may enter as many times as you like as long as each model is completely new and uses no components from other entries. Entries using models which are not original will be removed and the poster disqualified

3, Your entry may contain as many views of your model as you like but it must include a clear and easy to see wire frame of the mesh before any smoothing/subdivision has been applied. Please use a screen grab. No other method is acceptable and any "wire renders" or wireframe we can't see properly will be removed and the poster disqualified

4, You must include the following details with each submission: software used and time spent creating the model. Any further information is voluntary but posts not containing the required information will be removed and the poster disqualified.

5, Post only one image submission per entry which must be no larger than 800x600 pixels in either landscape or portrait format with a file size of no more than 100k. These images must be uploaded to our servers using the "browse" button on the forum reply page. Do not link to external images Files. larger than the maximum size or posts containing links to external images (other than for reference materials) will be removed and the poster disqualified

6, Time spent on rendering or texturing or building a scene in which to display your model is not included in the allocated period to allow those with slower machines to participate on an even playing field. What we are looking for is the quality of the models you can produce "under pressure". If your model is not complete, you can still post as long as it's recognizable.

These rules apply to everybody taking part there will be NO exceptions


Time limit - 90 minutes
Deadline - 22.00 G.M.T. Wednesday 15th of March 2006
Subject - Entertainment Center


Entertainment Center

The goal here is to use your time to model out the different components that would be used in an entertainment center. The television, dvd player, VCR, receiver, speakers, basically anything that you would find on an entertainment center. This does mean one thing though, all models in the scene must be modeled out in the time given. No additional models can be used to make the scene "complete." So if you want to add a lamp or some dvds or whatever to fill your scene, they must be modeled out within the time allowed.


Have Fun and Good Luck!

Marty, Fastrak, and Andy

[hammering3D]

hmm that's an interesting ideea, I bet we will see again alot of amazing models and renders.

Good luck ppl, see U

[OmegaN]

sounds like fun =)

[Antievo-3DT]

Wow! This is going to be interesting. Alot of modelling, and 90 minutes this time! Cool.
I hope I get the chance to join in on this one. I am sure we will see some amazing entries this week!
Good luck guys!

[adamos]

Very nice subject hope to have few entries this week. I have made some thing like this before. You can find my work here: HOME CINEMA (http://forums.3dtotal.com/showthread.php?t=36945&page=2&pp=15&highlight=Home+cinema)

[Intersimi]

Blimey, this is going to be a tough one.

Are you allowed to practice each model, then bang it out quick, timing yourself. Then do the same with the next model? I want to operate within the limits, so that I do not exploit the situation.

[fastrak]

Sorry for being so late in posting this.....time was not on my side.
So here is my starter...for what it's worth....DQ'd anyway :cry:

info on the pic

[moleeth]

heres my first entry :)
btw that is my unsmoothed mesh i didnt use turbosmooth or meshsmooth throughout the model.
also i found it quite hard to fit a good image of the wireframes due to the space taken up by the object in the render, so if it aint good enough give me a shout and ill try and sort it out better

sorry about image quality as well compressing it to under 100k really killed it :hurt:

modelling time: 80 minutes
texturing + lighting : 120 minutes
render : 8 minutes

software 3d studio max

[DerekSc]

moleeth what software did you use? You need to add that to your post.

[sLeM]

Do I have to use electronics like a TV and a DVD player in my entertainment center? Or is it ok to do something else which is "entertaining"?

[pleasent]

Looks Like a nice challenge one thing i need to ask
is it necessary to create the scene ?
or just make vcr tv and amplifiers .. ?

one more thing do i need to model every thing ? or i can make one thing
that if i only one thing like ONLY FLATRON

is it ok :dunno:

[b3ta]

Cool subject - gotta find time for this one!!

[Intersimi]

Fastrak, I love the integral lights to your unit.

[SubCroC]

nice subject.i hope i can join this week.last week i was very busy with faculty.in weekend if i find time then i will make one.

moleeth
very nice done.great.first poster except mods.

Fastrak-3DT
very good work.pretty done.

[al3x]

ee ill definitly going to post this week yeah :D

[-R3D-]

moleeth:: Nice Entry mate, I like the speakers especially :) Nice render.
------------------------------------------

Hey peeps, Nice subject this week. I've never do this kind of thing before (TV's, DVD Players etc) so should be a good week to improve on that side of things :)

Here goes my 1st one, Hopefully it qualifies as a valid entry:dunno: started running out of time so didn't start modelling anything else like a VCR, digital reciever or Amplifier etc:( I hope to do more in future entries :)

Anyway hope its ok...

App:: Cinema 4D
Modelling:: 80-85 Mins
Texture & Light:: ~ 1 Hour
Render:: between 30-40 Mins (Done a batch render of different light setups so not sure exactly):roll:

[fastrak]

Intersimi
Thanks, I think they added a nice touch

SubCroC
I appreciate your comments. I hope you find time for this one.

Fastrak

[Marty_McFly-3DT]

Ok, I'm going to try and answer the few questions that have been asked.

Intersimi: Generally, the purpose here is to try and model out what's presented to you as best as you can within the time given to you. There are time when you may model something out and realize that you're not going to make it in time. Most members in that case will give it a second shot starting from scratch and using what they learned the first time through to model a bit faster. In the end though, it's best to see what you're capable of in your first submission, and then use that to improve as you move on to your next submissions.

moleeth: Although your entry is fine. I prefer it that wireframes are not made transparent. Objects behind the wire tend to get in the way and make the wire not completely clear and visible. Try to follow Fastrak's example of posting. In his non-submission, you can clearly see his rendered version as well as his wireframes. Your render does not have to take up the full 800x600, as long as your model(s) are well presented.

sLeM: An entertainment center is mostly used for electronic components. You can put other things on there if you wish, but you should try to stick to the general purpose of its intended design.

pleasent: If you look at my starter vs. Fastrak's starter, you'll see that mine is presented on a very plain and boring background, while his has the look of a full "scene." Either way is acceptable, but if you choose to make it a full scene, your walls, floors, ceiling and anything else in your scene must be modeled within the time allowed. As for your second question, you only need to model out the components that you'd like to model. So if in your scene you decide that the people who own your entertainment center are "too cool" to have a VCR, then don't model one. :D

Well, I hope this clears up a few things. If you have any more questions, ask Fastrak. He drank the last of the Wild Cherry Pepsi and didn't put any more cans in the refrigerator! Thanks buddy!

[al3x]

THIS MY FIRST TRIE ON IT

MY ENTERTAIMENT SISTEM A BIG TV ,DVD ,and a playstation 2 :) :lurve:

any comments will be welcomed :shy:

[fastrak]

Well, I hope this clears up a few things. If you have any more questions, ask Fastrak. He drank the last of the Wild Cherry Pepsi and didn't put any more cans in the refrigerator! Thanks buddy!

:evil: :halo: :evil:

[back to school]

this is my first try

[moleeth]

moleeth: Although your entry is fine. I prefer it that wireframes are not made transparent. Objects behind the wire tend to get in the way and make the wire not completely clear and visible. Try to follow Fastrak's example of posting. In his non-submission, you can clearly see his rendered version as well as his wireframes. Your render does not have to take up the full 800x600, as long as your model(s) are well presented.




ahh, sorry about that. do you want me to re submit an entry with clearer wireframes?
ill try keep that in mind for the future :o

[Orkron]

here's a non-entry just to show:
http://orkron.com/images/full/tv.jpg

[Ian8811946]

really nice entries so far guys, I hope to attempt mine this weekend :smug:

[pleasent]

NICE Orkron

i like it :)

[Orkron]

hey thanks pleasent!
it is a non entry though... :(

The speakers in that pic are from week 4, I won that week with those :)

[al3x]

nothing to say too sleepy to late zzzZZZZz
comments anyone's? :kiss: :wave: :o

[Headphones_John]

Yay!!! I have a free day tomorow. Will DEFINATELY enter this.

The starter was pretty great, setting the benchmark pretty high for me, then more sweet submissions.

fastrak-3DT The Lighting is wicked on that - nice touch
al3x You did a PS2!!! :D

And everyone else... Mmmmmmmm big speakers :smug: :evil:

[noyb]

What? No 13" tv with built-in vcr yet?

I'll try and enter one this week, I've been away for too long :wall:

[-R3D-]

al3x:: 1st:: Nice Entry mate. Cool PS2, And Controllers :) 2nd:: Like the simple models, love the outcome of this one :D

back to school:: Sweet scene, Like the speakers :)

No comments on mine? :(:dunno:

[Marty_McFly-3DT]

...No comments on mine? :(:dunno:
Yeah... you couldn't pay me to keep all that glass clean! :wave:

Marty

[Diabolos]

fastrak - you a HARMAN | KARDON man too?

D,

[al3x]

I allready have an ideea for my 3rd post :))

[fastrak]

fastrak - you a HARMAN | KARDON man too?

D,

Wow...good eyes. :)

[back to school]

nice entries guys. Here is my second one.

[al3x]

party people.. :dance: :wall: :dance: :wall: :dance:
this is an integrated tv with spakers integrated too,lasers and floor thath canges color and litgning,:)


next one should be an entirely furniture with ..oh well :haha:

[al3x]

back to scool nice entry lots of speakers I like it but no dvd player for that hy tech screen?

[back to school]

al3x the upper device should be a dvd player.
look at these new ones http://news.com.com/2300-1041_3-6024705-7.html?tag=ne.gall.pg

[Hilm]

*Entry Withdrawn

[TDR]

unless you're going to attach your image here, in your post, you'll get disqualified. better hurry until a moderator sees your post.

Do not link to external images Files. larger than the maximum size or posts containing links to external images (other than for reference materials) will be removed and the poster disqualified

[al3x]

back to scool k man, my mistake ;)

[evolution]

Hey guys great entries so far, I really like the topic this week!!! I should have my entry up later today, I finally was able to model it in the time limit, theres just so many things to model :) Anyways keep the good entries coming they all look great!!!

[SubCroC]

SubCroC
I appreciate your comments. I hope you find time for this one.


your welcome.i fount time to make one.

-R3D-
very good modelling,background wall would be better.perfect render ,great texturing.

al3x
i'd like to make this with ps2-3,u did well.2nd one is pretty nice.cool, liked it.speakers r talking.

here is mine.info on pic.

[Marty_McFly-3DT]

Heres my first ever entry. Any way hope you like it:

Click Here (http://www.jeffgreen.f2s.com/TGFX/Main.png)

Theres a dvd player, xbox 360, tv, and speakers...
As already noted, you've broken a couple different rules with your post. Please make the changes needed.

Marty

[Hilm]

As already noted, you've broken a couple different rules with your post. Please make the changes needed.

Marty

Ok sorry ive converted it to a jpg and uploaded it... I apologise for any probelems i caused :wall:

[al3x]

Hilm man where's your wire ? :) ....rules r made to be broken eh? :))

[Nehumanuscrede]

I know this is somewhat off topic, but I think Softimage has officially lost their frelling mind. . . .

I was reading about their new ' face robot ' software and when I saw the pricetag on it, I nearly fell over. I'm guessing the average user ISN'T their main objective. Though, give it a year and few sales of it and they'll bundle it with XSI Advanced for free much like they did their behavior software. :)
lol

SOFTIMAGE|FACE ROBOT Designer is available for $94,995 USMSRP, and is a complete environment to prepare, solve and animate faces. Designer includes the tools to define wrinkles and puffing, place tendons and fine-tune the mouth. It also includes all of the functionality of a seat of Animator. In a typical pipeline, a single seat of Designer is used with several seats of Animator.

SOFTIMAGE|FACE ROBOT Animator is available for $14,995 USMSRP. Animator animates faces prepared using Designer. Animator is a hybrid environment for both keyframe animation and motion capture. It uses a powerful retargeting algorithm that transfers animation and motion capture across faces and offers high-level tuning controls.

And now, back to your regularly scheduled modelling session. . . . . :dance:

[fastrak]

ouch!

[noyb]

Hilm, I notice you edited your post, but you can only have one image per entry. The wire has to be in the main image, not separate.

[back to school]

SubCroC nice one. You got there a cool "fat" subwoofer (or whatever else is that) !

[SubCroC]

Back to school
thanks for comments ,appreciated.ur entries r very nice also.

hilm
very nice done.get the rules rite as Marty_Mcfly-3DT suggested.union the wire and main work in one 600x800 or 800x600 sized jpeg.

Nehumanuscrede
as Fastrak-3DT said "ouch".i hope they'll fix their fault.

[Mousek]

ok cool challenge.
#1st pic.
----------

[mr_lemon]

WOW Mousek!!! Good going! you've improved alot!

[Hilm]

Hilm, I notice you edited your post, but you can only have one image per entry. The wire has to be in the main image, not separate.


Bah i give up lol... Ive spent longer trying to meet the rules than I did modeling it, i'll just enter it next week now that i know all the rules (or i hope I do)...

[3Dvirus]

hello ppl...long time no see...here is my entry for the week...hope you like it.
3ds max 8 time full 90 min...texturing long hard hours...vray.

[al3x]

3d virus simple model verry nice render :)

[ozi]

Hi everyone, my first challenge :wave: , hope you'll enjoy my picture.
Cheers

[fastrak]

Mousek, 3Dvirus
Good to see you back here. :)

ozi
Welcome to the SMC forums

[Intersimi]

Some great entries this so far. I didn't think I was going to enter as it would be too much to model in the alloted time. But I got there with a few minutes to spare. Now I am back to textureing (not my favourite part, but I am getting better).

[SubCroC]

ozi
wow.so good work.detailed modelling.clean texturing.welcome to forum.

hilm
lol.U've suffered :hurt: lot with those rules. :lame:

[Mousek]

fastrak-3DT thx ... :) wow you are moderator. good job.

[devil child]

THIS MY FIRST TRIE ON IT

MY ENTERTAIMENT SISTEM A BIG TV ,DVD ,and a playstation 2 :) :lurve:

any comments will be welcomed :shy:

Nice work but one thing is seriosly not right, That is not what a playstation two looks likes. It should be black and the disk tray is on the other side.

[trix]

hehehe i hoped that could be an entry =)
but i used one Evermotion 3d Block (the light spot)
but i started this and a job interview on 3d has come and i took this more seriously (sorry english). hehehe i wish i can get the job...later i will do some for thes week´s challenge.
Modeling: around 1hr
Light: a lot (render tests)
Render: 1hrs at vray

and..i´ve seen all the other entries and i think u all doing great works..but u need to take more time on light and texture, couse it doesnot count on challenge time and will improve all your works.
kisses and hugs...

JUSTO..where are u my boy =) love ur works.
Noxx where are u
Ganner wanna see yours..

[Mousek]

trix very nice render

[trix]

@mousek tnkz dude..i´ve seen ur portfolio like the mp3player =) and the desing of the sofa_04..here on my state sofas same of urs (similar) are so expensive =)

[Mousek]

trix ... xixi thx :) and i have complete model and now i must create any nice render . Preview is here ...

[trix]

hehehe yeah thats a great model
try to use some vray lights with some direct...
dont forget the GI
eheh

EDIT: try to make all this with a clean wood like a normal HACK
will be good..and with the right config will have a great render work

[Board]

I had to post this ide ;) you got'a love partikal systems :dance:

Modeling ca20 min maybe les.
Re diskuvering how the particle system works ca. 60 min ha :P
Textering 15min -Wish i cood ues more but my time is limeted :wall:
uesd maya 6.5

[betasoft]

Ok, here is my first entry for this week, hope you like it...
ps. if you want textures on it you can download it in end of week in beta-soft.net

[Nehumanuscrede]

I know, I should be utilizing this time to create some awe-inspiring work of art. However, I'm having difficulty staying motivated modelling and I can't quite be sure why. . . .

Perhaps I'll find my way back into it soon. . .

In the mean time, I thought you all would get a kick out of this site I found. I'm sure you all have seen the little crystal ' sculptures ' you can buy that have been laser burned into a three dimensional image ? Well, this company will now do custom ones for you based on any 3-D model you send them.

Like your avatar or logo? Send it to them and they'll burn it into crystal for you.

I found it quite interesting. . .

The site is found here: http://www.crystalrender.com/

[al3x]

Wow Trix Very Very Nice Render

[al3x]

This Is An Older Version Of What We Colle Now An Entertaiment Center

Nice Entries Guis

[al3x]

DEVIL CHILD man I modeled the ps 2 after a picture :D is that so important for the disc tray to be on the right side :))?

[pleasent]

hey Trix nice render can u tell me how did u achieve that light spot with vray setup any tutorial ?

[Cmart]

alright finally have a chance to get away from work and enter something. Hope this works. There is not very much detail, because if I started doing alot of detail I would have gone over the time limit. Hope you guys like! Please let me know what you think.

Peace!

[Orkron]

Cmart, if you're worried about not having enough time in this challenge, be aware that it's a 90 minute challenge this week. You had another 30 minutes to add more detail :)

[ozi]

wow nice entries over here
Like your render trix and betasoft.
And thanks for your welcome mates ;)

[Ian8811946]

Heres my entry this week. Only my 4th model in 3ds max. Im pretty happy with how it came out. I also found out how to use light tracer so that was really cool. I wanted to add a lot more stuff like wires and put it into a scene but I just didnt have enough time (still a lot of trial and error since im learning the program) I also had to just change around the dvd player I made to make it looks a little different so it might pass as something else. :dunno: Not really sure how long I spent on the materials and lighting but I think it was around an hour (again lots of tweaking). I learned a lot while building this thing! :smug:

3ds Max 8
PS 7

Default scanline render
first render : 2:27
second render (close up): 4:37

[b3ta]

Marty_McFly-3DT
Like your starter model - you managed to cram a lot into the model time.

fastrak-3DT
Nice speakers and hi-fi seperates in your scene, love the addition of the teapots!

moleeth
good solid entry, another who has managed to cram a lot into the model time, good job. Could benefit from some textures on the hi-fi separates.

-R3D-
Like the feel of your first entry, has a nice soft glow about it, nice clean wires too. good job.

al3x
So many entries, all very good, lots of detail and clean renders, good work. 2nd entry - you've achieved a nice 'mesh' on the speakers, an unusual design. 4th entry, another very detailed model from you, like the feel of the tv screen.

back to school
The model on your first entry looks fantastic, although I'm personally not sure about the salmon pink wall! - great job overall. 2nd entry, like the material on the floor standing speaker cones, another good entry.

SubCroC
Wow! - You've made loads in the time limit!! - so much detail, and nice presentation too - great work.

Mousek
Long time no see! - glad your still taking time out to join in on the forums, and a really good entry too - love the lighting, such a blast of summer, the whole scene has a real good feeling to it, great work. - Looking forward to your second model.

3Dvirus
Great use of textures, a very pleasing final render.

ozi
Welcome to the forums, a very detailed first entry, keep 'em coming.

trix
Liking that a lot, great use of lighting - I agree with your comment about taking more time on texturing and lighting, really can make or break a model.

Board
Wooooah!! trippy!!!

betasoft
Like the direction you've taken with your entry, great modeling and a clean render, liking a lot!

Nehumanuscrede
That crystal sculptures site looks very interesting, think I'll mention that at work, might be something we could use. - Thanks for sharing.

Cmart
Great solid entry, it's a shame we can't see the dvd player too well in the render, looks like you have some detail there on the model, but still a really good job.

Ian8811946
Wow, that's good, nice modeling and your render look 'right' - lovely job.

Phew!! - lots of comments!!!! - now my turn! - first and probably only entry this week, really enjoyed doing this - stats on the pic

[betasoft]

Nice topic for this week i think and mostly nice works too

Cmart: really good scene. Looking very realistic. (i'm not sure with your wire, it's looking very interiesting but not like wire).

Trix: quiet nice scene (what to add some wire). good lightening and render. you are my favourite

mousek: hey, nice toon render...

b3ta: wow, cool, maybe surface of screen is not realistic at all, but whole render is looking good

[Gamma12]

I've been away too long from these challenges... usual reasons... final year of high school, no inspiration, etc... :(

But I wanted to participate again and created some kind of trendy modern entertainment center for this week. :eek:

Hope you don't despise all things made by Apple and/or starting with a lowercase 'i'...

Hope this qualifies as an entertainment center.


3Dvirus
trix
b3ta
Very nice renders.

PS. I don't actually own an iPod. ;)

[al3x]

he he I wanted to get a better render in my scenes , ;P
any one things thats a better render than my last 4 post?

[al3x]

beta thanks ,art is in detail ,..isn't it =)) ..the 5ft post might be my last since tomorow is scool :((

[back to school]

here is my third entry this week.

[usmanghiyas]

ive taken refrence images from web took me a while to model but im still confused about vray creating grains on my renders if any one can help me out how to get rid of it i havent use grains in my texture but still its messing my renders thanks sorry iv forget to mention Modeled with Max 7 & Rendered with Vray Adv 1.4 ill post another wireframe soon thanks
Usman

[trix]

@betasoft - tnkz dude..gonna post the wire now =) but as i sait thats not an entry =), btw, i just love ur avatar...quite original stuff!
@ozi - tnkz fela. great start btw! welcome to threedy!
@al3x - tnkz bro, i always watch your posts on speed modeling
@pleseant - sure fela, u can finde me on MSN: lipetrix@hotmail.com, tnkz
@b3ta - yeah dude like your dvd! the texture may had to be hard huh? good job!
@gamma12 - yeahhhh hehheheh...GO IPOD..i wish have one! good job and idea.
@ian8811(hausdh lot of numbers) - you so far had the best work on lighting and texture i think..do more! great ideia on the TV HACK ^^
gonna post the wire but as i said..its not an entry (hehe im already rendering some wire...eheh hold on a sec =)

cya all dudes!

[b3ta]

Thanks trix - yeah, the texturing was hard (well, for me anyway!) - I'm still getting some problems at the moment with overbright pixels, and black dots on my render (removed in post production) - also I'm struggling a little with the anti-aliasing, it's just not good enough for my liking at the moment, maybe I should have let it render longer - I'm using FPrime - only had it a few weeks, need more practice I think!!

Great job on yours - looking forward to the wire...

[trix]

poor wire but quick =)

cya all..
as i said
lipetrix@hotmail.com

[Intersimi]

Well here is my attempt. The idea is that The PC has pretty much everything in it. It can play games, record Live TV, Play Music ect, etc. The amps are prebuilt in to the Speakers (of which there are 2 large ones at the front, 2 smaller ones at the rear and a set of Sub Woofers in the cabinet.

I did also model some glass frames that sat on the unit in the time allotted, but Mental Ray went all funny on me everytime I included a glass object and an omnilight, so I removed the glass frames :(

[b3ta]

Intersimi good job - like the idea, shame about the glass, would've added a nice touch to the scene with some reflections and such. But even without it, an impressive entry. Are the speakers of your own design?

[Marty_McFly-3DT]

ive taken refrence images from web took me a while to model but im still confused about vray creating grains on my renders if any one can help me out how to get rid of it i havent use grains in my texture but still its messing my renders thanks

Well, we might be able to help you out... if we knew what software you were using! (I'll ignore the fact that you said you're confused about VRay, since you ignored the fact that you must post your software with your entry. ;P ) Also, I'd use the dead black space on the bottom of your entry to show a close up wireframe of your controllers, and use up the whole 800x600 allowed. But that's just to make it easier for the judges. :halo:

Marty

[usmanghiyas]

Intersimi : Great work that sofa is not very much upto the level of other things but nice work fine idea .

Marty McFly 3Dt: ive uploded changes as uve asked me for thanks alot and plzz let me know how can i fix up that unliking grains in vray.

[Rooky]

My 1st this week!
Hopefully will find some time to texture my center and rerender :)
But meanwhile here`s my try!

[pleasent]

Hey Usmanghiyas nice work keep it up

Rooky nice work this looks nice giving cartoony feel y dont u texture it ?

[Rooky]

pleasent thanks for comments! :) I`m kind a little busy rigth now, but I promise I`ll manage texturing until the deadline ;P

[Intersimi]

Intersimi good job - like the idea, shame about the glass, would've added a nice touch to the scene with some reflections and such. But even without it, an impressive entry. Are the speakers of your own design?

Thanks for your comments b3ta. In my design, I just wandered what I would like in a system myself. The main focus should be the screen, next the sound. I do like minimalistic in design, I thought that large speakers would help to maintain tham minimal look. In order to minimise, you don't necessarily need to go smaller ;)

[Intersimi]

Intersimi : Great work that sofa is not very much upto the level of other things but nice work fine idea .

Marty McFly 3Dt: ive uploded changes as uve asked me for thanks alot and plzz let me know how can i fix up that unliking grains in vray.

Sorry about the sofa :( the stupid keyboard took me longer than first imagined, so I was running out of time for accessories. The Sofa was very, very quickly thrown together, just try try and add a bit of depth to the scene.

[usmanghiyas]

Intersimi: uve made that keyboard very nicely .

Plesent: Thanks Alot man.

Rooky: Very nice modeling mate

[Rooky]

thanks usmanghiyas ! Tried my best :]

[Ian8811946]

wow thank you b3ta and trix for your comments, I am honored. Very nice modeling and textureing as well. :)

I am done with my second entry. I will render it tonight (cant tie up the computer all day, parents dont like it much :evil: )

[Intersimi]

I may well do another one in the week also.

[Headphones_John]

Damn! Someone got my idea already >_< if only i posted sooner.
Yeah, this is my 'Media Center' heheh. I did the modelling on friday, but it was taking ages to do just test renders, and it was already midnight after id textured a few things. Finally finished it today.

I was pretty rushed, so didnt get to model the PC itself (thats a sub under the table) and the chair was.... well... rushed.

[noyb]

I'll do some comments while I'm waiting for a render...

moleeth: Very nice details and render. The compression doesn't look that bad - it's harder to tell a difference if you don't see the uncompressed version, so don't worry about it :)

back to school: I like the details on the speakers. The fact that you include the screw holes adds some nice detail.

al3x: You're third one looks very psychedelic. You have a very wide range of ideas for your entries, nice and creative.

SubCroC: You have developed a very distinct style, I admire that :)

betasoft: I like the old TV. Nice idea.

Intersimi: Gotta like those all-function HTPCs. Nice modelling.

Rooky: You're another with a very distinct style. You always have nice models to look at.

Everybody has done a good job so far, too many to comment on right now.
Keep up the good work.

[noyb]

Here's my entry for this week:
It's made with only 3 parts, 2 of which are the horn-like things.

Modeled in Autodesk Inventor: 90m
Rendered in 3ds max: 1h15m

[evolution]

Great entries everyone!!! Heres my entry for the week I finally found time to texture it.

Modeled: 3DS Max 7
Time:90min
Texturing:1.5 Hours
Lighting/Rendering: 20 min

[ApeiNe]

noyb that's awesome :o Nice work ;)

[Rooky]

noyb - thanks m8! I could say the same about you`re style ;P Great idea and nice modelling!!

[DerekSc]

Hi hi! Nice entries by all this week! :)
Details in the pic. Kinda lost some of the detail in the compression, but that's life. Not modeled based on anything real, just did a quick sketch and that's what came out. The electronic components are based on the real thing. Wanted to do a game system but ran out of time, so I plopped an old classic on the tv screen.
Looking forward to the next challenge. Take care everyone!

DerekSc

[Mousek]

Rhinoceros .... please click www.asgvis.com

[trix]

@mouzek hehe now we talking =) hehe great model, texture and work..take a long time the texturing and lighting...but isnt that great? the DVD is awesome...congrats =)

[al3x]

mousek he he ...dishes very nice model how did you made teh speakers I mean what metod,....?and render too

[SubCroC]

DerekSc
U've got ur own style.great work.liked it much.modelling is cool.

mousek
must say really great modelling.especially render is super.the furniture is according to the objects in it.speakers r lovely.plates and glasses matched well.i give 5 stars.congrats .
indeed how did u render it? with rhino,or with another software?. and did u use Nurbs works of rhino?.

rooky
great work with clay render.

noyb
very nice entry.

[Justo]

Hey guys, sorry for not being able to post the tutorial I said I would last week, i got in a car accident last weekend and its just been pretty insane lately. But luckly everything is now taken care of, have my car back :D I will of course make that tutorial as soon as the chance presents it self again. :D Trix, I will hopefully post one today. Thanks

Great Entries guys, I will def post one today!

P.S. Accident wasnt my fault :D Im a good driver!!!

Justo

[Mousek]

al3x, SubCroC
---------------
thx guys, here is i nfo u requested:
rendered in V-Ray for rhino beta 11
i used nurbs in rhino because in rhino r only nurbs :lurve: and speakers this way:

[al3x]

Mousek now ive got it :D ill try to do myself someting with nurb in Max 8 coess iI a forgetting :))

[al3x]

K this ideea I had since my second entry but I couldn't think that was posible to model an "entertaiment sistem " from the trunk of a car but hell there it is :D :halo: :dance: :smug:

[al3x]

what do ya think?:D

[al3x]

noyb thanks but what does "psychedelic" mean :D

[Bask]

Hi... This is my first post here. Please let me know what you think about the model and the render. I am using 3ds max only for the past 4 months.

[Marty_McFly-3DT]

Bask: Welcome to the forums... Take a look at the rules on page 1 and try again... :smug:

Marty

[Orkron]

I'll make it easy for you, but please do read the rules...the mods get grumpy when they have to keep explaining the rules to contestants...

Image size must not exceed 800x600 or 600x800

[Bask]

Thanks for clearing the doubt Orkron. Will correct it now.

[noyb]

noyb thanks but what does "psychedelic" mean :D

It was just a way of saying there are a lot of bold contrasting colors :).
The word is often liked with hallucinations where a lot of color is involved.

[Marty_McFly-3DT]

I'll make it easy for you, but please do read the rules...the mods get grumpy when they have to keep explaining the rules to contestants...

Image size must not exceed 800x600 or 600x800

Grumpy? Me? :D Nah... Although the past couple of days have been rough. :( But not as bad as poor Justo! It's good to hear that you're alright and up and driving! Now get to work! :crazy:

Marty

[Ian8811946]

heres my second entry, bit more abstract. The sweep modifire is cool!

The renders turned out a bit brighter than I wanted them too. they looked fine when I had the # of Rays in Ray Tracer set to 10 for my test render. But when I set the # of rays up to 1000 for my final render it came out like this. Does increasing the # of Rays increase the brightness of the render? or was it just the grain that made it look darker?

default scanline:
first render: 5:15
second render (close up on back): 8:01

3ds max 8
PS7

[b3ta]

DerekSc Devilish!! - unique design, nice modeling too.

Mousek Great second entry, really nice lighting, you've gotten real good since I saw you last, congrats!

Justo Glad to hear it wasn't too serious, or your fault! - Someone crashed into me once, took weeks to get my car fixed and back to me, then it was stolen and written off!! - it's a cruel world!! - anyway, looking forward to your work.

al3x another nice idea, cool lighting effect.

Bask Welcome aboard, great work for just 4 months, look forward to more from you.

Ian8811946 Whoa! - crazy concept, kinda like it though!! - cool stuff!

[al3x]

b3ta thanks man ive just used an material that makes alot more collor bleeding than others :D btw im using final render and i still kinda suck on it but getting better every render ;)

[qais]

hellooooo,heere is mine (i'm not completely satisfied with it)
Modeling time:35 min
Software:Maya

[Ian8811946]

thanks again b3ta for your comments, glad to hear you like it :)

[domiry_graphics]

hi.. :wave:
my name is Mohammed al_domiry
i am from Egypt
and i found this forum near, and realy i benefit from it
I like to find some one help me to be good in 3d max
because i love it sooo much
i am sorry .. my english is not good :wall:

this is my first time to participate

i consider all of you is my teacher >> because i benefited from your designs

i happy to be with you :dance:

[andoy]

Grumpy? Me? :D Nah

So who are sleepy, Dopey and the other four ( darn i can't remember their names ) :)

[akira hanzo]

Hello, this is my contribution in this challenge! I don't have too much time right now to explain the details and the origin of this old entertainment object.
Good luck to all the participants!!! :dance:

3ds max 7
modelling: 90 min
textutre: 2 h
render: 20 min

[Orkron]

Marty, so I trust ur an expert in the art of vray rendering, no?

Justo, glad the accident wasn't serious. I once rolled/flipped my car at 90 mph ... gave my friend a concusion and i got a tiny little itty bitty cut on my knee from the glass...The things we do when we're young right?

p.s. It's deadweek and I might just get done with my final projects in time tonight to try and model something...not sure if I will, but I hope I can :)

[SubCroC]

Mousek
U've been a nurbs monster.great.i dunno how to use nurbs correctly.thank u for response.appreciated.

Bask
nice work.

justo
god bless you.hope no more cases like that.3D world needs ur talents.

akira hanzo
great model.renders is so so sweet.

Ian88xxxxxx
lines r too confusing.very nice idea there.good model.

qais
clean and nice.

[Ian8811946]

thanks SubCroC are you saying that the lines on the wireframes are confusing? they are quite dense on the bars.

[trix]

@akira hanzo : nice entry. gj at all. and good work with hdri

[Marty_McFly-3DT]

Marty, so I trust ur an expert in the art of vray rendering, no?

Heh... I'd like to say that I am, but that just is not the case. The tutorials were a big help though. Thanks a lot. :) I've also been taking some private lessons from someone more wiser than me in the ways of V-Ray and he's really been a tremendous help! I really appreciate it and hope to make you proud one day! My starter for next week will be a V-Ray render... I'll let you guys be the judge! :shy:

Marty

[DerekSc]

Thanks for the comments b3ta and SubCroC, always appreciated. :)
(I'll reeeeeally try to do something normal next week... maybe... )

[Orkron]

Heh... I'd like to say that I am, but that just is not the case. The tutorials were a big help though. Thanks a lot. :) I've also been taking some private lessons from someone more wiser than me in the ways of V-Ray and he's really been a tremendous help! I really appreciate it and hope to make you proud one day! My starter for next week will be a V-Ray render... I'll let you guys be the judge! :shy:

Marty
Sweet, I'm looking forward to it!

[pleasent]

akira hanzo

I reallly like the modeling and the render iz just awesome cool work m8
and kindly wana share what techinque did ya use becoz i think some parts are nurbs some are poly based ?

[Mousek]

b3ta, SubCroC thx :)

[Bask]

Here is my second entry. I hope I didn't make any mistakes this time. Thank you b3ta and SubCroc :)

[spmetz1986]

akira hanzo

I reallly like the modeling and the render iz just awesome cool work m8
and kindly wana share what techinque did ya use becoz i think some parts are nurbs some are poly based ?

I appreciate your reply. Though I am somewhat familiar with what NURBS are, I have never used them in modeling. Every piece in this model began either as a box or a cylinder. I simply extruded and scaled, among other simple modifications, to create this entire model. To be honest, I was nervous working under a time constraint, so I planned a lot of stuff out on paper the simplest way I knew possible before I began. Thanks again.

Sean

[Intersimi]

spmetz, your TV is a bit too dark.

[spmetz1986]

spmetz, your TV is a bit too dark.
Yeah, I was noticing that, too. I had considered putting another omni in there that would exlude everything but the TV; now I wish I would have. There is some geometry that I wish one could see better. Something to keep in mind...Thanks a lot.

Sean

[Rooky]

SubCroC thanks m8! After some tries to texture this kind of entertainment center - i`ve given up - and I`ll leave it as clay render ;P

[Rooky]

But here`s my second this week! Got the idea - and couldn't stay calm after I was done with modelling! Again a clay render, but I suck at texturing - so I didn't want to screw up the whole scene!
I spend all 90 minutes -
loudspeaker - 25 min
video recorder - 10 min (went fast, because it was very similar the one in my first entry - and I knew step by step what i`m going to do)
chair - 5 min
tv - 30 min (my own concept)
splines - 20 min (didn't use any plug-ins or reactors, so it took me some time to compose them in the right places)
Anyway - hope you`ll like it :)

[Mousek]

Rooky xixi cool repro :evil: :dance:

[Ferry P]

hehehe i hoped that could be an entry =)
but i used one Evermotion 3d Block (the light spot)


you're sure that's the only thing from Evermotion that you've used?

[trix]

you're sure that's the only thing from Evermotion that you've used?

sure.
the other ones are really near of it..
but if u check the wire, its kind a little primitive. (i used always box modeling, dont know nurbs that much)

and i have here on my pc some PDF files of evermotion..and i took care to make equaly just for practice.
its kid of hard...but i always have this..
but in fact that cant be a speed modeling challenge couse i used them (the blocks based on evermotion) not just couse of this.

but as i said..not an entry. just take the theme Enterteimnet Center and used as inspiration.

any more questions?

----------

and btw..
some times i take the ones that i have..
and put side by side..
and try to make equal, couse i always try to make as real as evermotion..
couse i think it have a better quality.
try some time..
for an exemple:
the sofa i had the evermotion one..
i import him and froze..and go modeling above him to training...
any problem?

-----------

and one more thing..
the only cd i have..i use for speed up the scenes
and the one is VOLUME 3 (lights)...
and when im modeling...for any client...that dont specify the the light i use it..
but when the light is specifyed (most cases) i have to model. couse of that..
when i use an evermotion block...im not happy with it..becouse of this i always use the lights so far of the camera...to it do never became so importat to the scene..
every time a model an scene..i try to put the best modeled stuff on first on IMAGE.
and for an exemple...when the model isnot that great i uses some cloth reactor...to hide the imperfection..
ok?

[Marty_McFly-3DT]

Yeah, I was noticing that, too. I had considered putting another omni in there that would exlude everything but the TV; now I wish I would have. There is some geometry that I wish one could see better. Something to keep in mind...Thanks a lot.

Sean

Just so that you know, you're allowed to re-render your entry as long as you do not modify the geometry of the models in any way. So if you feel that your lighting could be better... give it a try. :)

Marty

[trix]

hehueash sorry marty

[Rooky]

Thanks Mousek ! Nice to see u back and on track :)

[Mousek]

Rooky ... yes i´m back hehe.

[trix]

hey..
anyone here..
is a pro on photoshop and can gimme any help?
lipetrix@hotmail.com

[betasoft]

Hi, here is my next entery, this is in style of Triplettes de Belleville. Hope you like it (btw.. to trix, why your post in not as an entery??? indeed its welcom for me but why???)

visit my portoflio http://beta-soft.net

[trix]

sorry betasoft..
i dont understand ur question =9(
my english.

[b3ta]

betasoft beautiful work m8, really nice feel to it, kinda looks oil painted - great job.

Trix stevegibbons@gmail.com (I'm signed in now!)
Sorry Marty.

[betasoft]

to trix: it means only that, why your post in not as an entery, (i mean post with this image in page 5).

[betasoft]

to b3ta: thanks for you comment (ps your name means beta or b3ta?)

[spmetz1986]

Just so that you know, you're allowed to re-render your entry as long as you do not modify the geometry of the models in any way. So if you feel that your lighting could be better... give it a try. :)

Marty
Ok, so here it is. My second attempt at lighting. Let me know what you think.

[trix]

just to share =)
and take coments..
couse i think on 3d we always need ppl coment ur work for bad or good =)

[betasoft]

to trix: what you mean with "ppl"
sorry, my english is not such a good so now i don't understand to you :)

[gan3d]

Hi guys, here is my entry. Its a futuristic model :p. Sorry no time for proper texture & light. I shall do it for next entry.

info on pic

[trix]

ehehe nice ideia GANUU =)
hehe
and betasoft ppl = people =)
hehe ei beta add me on msn: lipetrix@hotmail.com
cya

[akira hanzo]

THX SubCroc, Trix and Pleasent for your consideration! :D



Subcroc-you probably have the most massive object ever imagined

Trix- nice render but the red wall is dangerous for the eyes

Pleasent- I didn't use nurbs... it is a mesh collapsed at level 3 (for rounding the corners), I was in a rush

Intersimi- I like your minimal style

Rooky- the funniest tv models: they look like characters

Mousek_ very futuristic but the plates and the glasses are not very safe near the speakers

Betasoft- I am happy for not being the only one with an old tv set

Bask- the most futuristic as well as the most friendly tv set

Fastrak & Marty- are you rendering with vray? this is the first vray exercise for me

3d virus, hamering 3D, Al3x-
great work! I see here a future team of modellers... with a special mention for the unstoppable Al3x :)

[Marty_McFly-3DT]

Ok, so here it is. My second attempt at lighting. Let me know what you think.

Now all you need to do is delete your original entry and you'll be all set. (Posting the same entry twice is considered double posting.)



Fastrak & Marty- are you rendering with vray? this is the first vray exercise for me...

My starter this week was a Scanline render. (That's the default renderer for 3DSMax) Fastrak's starter this week was a V-Ray render. He's pretty good at that stuff huh? :)

Marty

[trix]

akira hasuidha who the heck said red is dangerous? hehehehehe =)

[Mousek]

beta-soft pls give me icq on you.

[betasoft]

to mousek: you have it as private mesage in inbox...

[Mistik]

Hei guys,

For this week of the challanges i tought of a modified design of the apple G4 box set, so i came up whit this.

Nice entryes so far, a lot of good ideas and concepts! keep it up, we still have time! ;P :dance:

[spmetz1986]

Thanks for the help McFly. I'll get this thing figured out eventually. Sorry for any inconveniences.

[trix]

####NOT AN ENTRY####
used again the lights of evermotion.

gonna make my entry tomorrow...just wanna see your coments about the scene...i really love the critics =)

Special Tnkz to B3TA for the post work on photoshop...!
u so prestative =) tnkz..

MODELING: 1hrs30minutes (get some probleme with the oval speaker...so i decide to make it with a POOR back..just couse u cant see..but belive..its soh ugly)
LIGHTING: not much this time...only one direct (SUN) and 2 Vrays
RENDERING: 30minutes
POSTWORK(B3TA): around 20minutes

Tnkz, luv all
yesterday i will post my entry! see yah all!

**I HIT THE TIME SOH I DIDNT HAVE TIME FOR MODELING ANY SHAMPOO OR SOAP...Those speakers could look easy...but isnt =0)

[SubCroC]

rooky
your welcome bud.2nd one is super with great models there.lol why not texturin m8,we'll like it how u texture it nop.



thanks SubCroC are you saying that the lines on the wireframes are confusing? they are quite dense on the bars.


sorry,forget wat i said.ur work is great .keep it up.

gan3d
inventional work.great.

[hammering3D]

3d virus, hamering 3D, Al3x
great work! I see here a future team of modellers... with a special mention for the unstoppable Al3x :)


tnx man, a team of modellers soound good :D, join us and we will be Romanian Dream Team :lurve: , hihihi ...

[Mistik]

That sounds nice guys count me in (If u can take in Brasov :) )

[trix]

hhehehe lol
can u include this south american here?
ehehuisahe =0)
see yah

[Ian8811946]

wow trix very impressive work, I really like the scene and texturing and lighting! :)

also betasoft - Very good textureing

[betasoft]

Ian8811946: thanks for comment

[gan3d]

SubCroC and trix am happy u guys liked it..
Mistik apple G4 box set huh!! whats next :) is that a liquid mosquito repeller on the floor??

[Kaze_SR]

Hi everyone
Tough competition this week =)

Here s my entry for this week

Modeling time : 90 min
Lights and textures : 2 hours
software used : 3D Studio Max 6
time for my very slow computer used to generate this rather simple (but with GI) image : a very long and painfull 27 hours... HA !
I was so scared to have a power faliure... it would have totaly pushed me over the edge...

[3Dvirus]

Thank you all,i'm sorry I didn't have time to reply,lot of my time is eaten by school,and i have a big contest on saturday,tnx for the understanding.You all are such great people.Good luck and happy modeling

[julayen]

hi all
i just post for congrats trix for his entry ! i like the lightening and the feeling of the scene. :lame:
i have a tiny critics about the dark plastic surface on the ground.
(first the uv is a bit big i think)
I understand you don't want to hurt youself with you wet foot :smug: but i think its a concept error......it's looks like industrial ground ;i thing something like a carpet looks better (vraydisplacement :dance: ) for the sweet feeling of the scene.
good one guys!and good luck for the other challenger

[trix]

tnkz julayen..
hehe =)
hope u like..
=)
but u dont specify..
my english is so bad =(
ehhe
was the #1 image or the #2? (page 5 or page 12)

---------------------------

oooooooooo i goooooooot
ehehhe sorry...
yeah the plastic in black =)
yeah...
i wanted to make some SAFE SURFACE...for this in water bathroom =0)
gonna try some displacement..
i do think will be great to =)

safe first =)))))))
ehehuih
tnkz

[al3x]

originaly posted by akira hanzo
3d virus, hamering 3D, Al3x-
great work! I see here a future team of modellers... with a special mention for the unstoppable Al3x

he he thanks man ..now ive got an last idea for my 7th post ;) but I dont know if ive got any time

[al3x]

fresh!!
hey guys ...hwo think hes god on car modeling should enter to the \work in progress\group team work ..concept super car ....and post in ;) to prove themselves :))they r a good car designers ..:D or just that they could model well a car :D

[gan3d]

al3x thanks for the info dude, i will peep in :P

[cg_artisan]

hello guys

Sorry to be late

Here is my entry for this challenge

Done in 3dmax

Modelling:1:30 hr
Lighting and texturing:2-3 hr
Rendering:30 sec

[Bask]

Thank you akira hanzo :) Its called Hannswood 10inch Tv.

[H2O-3DT]

Black Box system.

3Dmax.
Time 90 min.

[ozi]

Hi fellows
sorry not a lot a of time for the moment :roll:
Betasoft i really like your style and you render,
H2o like your concept as well.
Good luck to everyone
Cheers

[ApeiNe]

nice one H2O ;)
But don't you copy the diffuse screen slot to self illum ???
Add that and a glass front of your screen, that would be better 8)
Nice entry and concept indeed :)
Massive one and I luv' it :roll:

[wdl]

BetaSoft: Nice one! Did you render it that way, or did you edit it with photoshop. Please tell me, I would like to use a similar style for a short animation project.

[H2O-3DT]

ozi
Thank you for saying that. :)

ApeiNe
Thx.
I turned up the self ilum to 100, but il try your tip next time.
The poor render blurred this thing up imo, but i dont have time available for another render.

:*poly:

[M575]

mmk....this is ma entry....its sorta 3 in da mornign over hear in Oz so yeha....dun mind the mess of a work:p but i tried:) and could someone tell me how to make things glow....at least without using vid post...like the lil light on the TV....anyhooo hope u like:)....PS sorry for da crappy compression....i am tired:p

[al3x]

m575 nice scene but whatss up with the floor .kinda big flanks no?;)

[M575]

well....u c.....i did carpet first...and then....well...let just say its 4:30 in da morning here and i didnt wanna go to the trouble of looking to make those smaller....:) i read that it judged on quilty of models and not textures:).....hmmm....i better quiltise ma next model:p lol....if theres any hints out there for an awsome floor i am more than welcome to take em:p

[al3x]

hey man thath texture is good too but u must go in the bitman coordonates on the material panel and enlarge the number of tilling ...if u didnt know :D

[Milan]

very interesting entries .

[Old_Nick]

Here's my entry.
Time: 90 min
Software: Maya

[betasoft]

to wdl: no it was rendered with classic render settings and after it edited in photoshop with using efect ink outlines and gain. But in case of movie you can do it with adobe afterefects

visit http://beta-soft.net

[jelatin]

hello, this is my entry in this challenge, hopefully it's in on time! please give me any comments

[hammering3D]

my entry :hurt:

[Marty_McFly-3DT]

Ok guys, time's up. I'll have the new challenge up in just a moment. :)

Marty

[hammering3D]

ufff...I can't belive I made it, I did't see how late is it and make render tests, and then I composite the image in 10 min with wire grab and stuff :D,

Anyway, I don't think that litle render will passs the judge, is the most unclear entry I ever post but I rush like hell :), and I try to present the wire clear as I can to compensate smal render, but smart me I make the plane for projections so big like that was the most complex model in the scene, yes a verry complex box :( where do I think :( ...well anyway I was't so pleas with the model, so kill it ;P

[trix]

heasuihea
heyyyyyyyyyyyyyyyyyy
marty
can u givi me
just 10 more minutes
im rendering my model =)
got some problem at work...
im on pc only like 2hour
the rendering is finishing

PLEAAAAAAAAAAAAAAAAAAAAAAAAAAASE

[Marty_McFly-3DT]

I would like to say yes... but unfortunately I have to follow the same rules everyone else does. If you were off by a mintue or two, then I might let it pass... but's it's almost 20 minutes atfer the deadline now. Sorry. :(

Marty

[trix]

ok =(
geezzzzz..
but any way..i gonna post as another NON-ENTRY
ok?
dude..some times i think we all that do 3d...
have to make only 3d, date girls, eat, go gym and go to the partys..
say NO TO WORK
ehuiashe =)

tnkz anyway marty

[trix]

time hit =(
hehe
but
the concept is intersting =)

[Mistik]

whats next :) is that a liquid mosquito repeller on the floor??

U are refering to my logo ( it's a dead cat =dead neko(japanese) so it has wings and a circle above its head )

[Radulan]

Projectors.. the past which still can make a great picture.

Great entries everyone. Shame I didn't get this up sooner.

But I guess now it is a NON-Entry hence no wire.

[sqrage]

@Gamma12 i love the models, its funny though the iPod is huge :P OR everything is small :P

[Gamma12]

sqrage Thnx for the comment and yeah, you're right, the iPod is a bit larger than in real life... but I didn't have an actual reference iPod, so I just guessed the size... looks ok I think, though. :lame: :smug:

[Marty_McFly-3DT]

Honorable Mentions

al3x (http://forums.3dtotal.com/showpost.php?p=438793&postcount=19)

back to school (http://forums.3dtotal.com/showpost.php?p=438798&postcount=21)

Ian8811946 (http://forums.3dtotal.com/showpost.php?p=439965&postcount=125)

spmetz1986 (http://forums.3dtotal.com/showpost.php?p=440332&postcount=161)

back to school (http://forums.3dtotal.com/showpost.php?p=439049&postcount=35)

back to school (http://forums.3dtotal.com/showpost.php?p=439481&postcount=84)

noyb (http://forums.3dtotal.com/showpost.php?p=439688&postcount=104)

evolution (http://forums.3dtotal.com/showpost.php?p=439696&postcount=105)



Runner Ups

moleeth (http://forums.3dtotal.com/showpost.php?p=438632&postcount=8)

-R3D- (http://forums.3dtotal.com/showpost.php?p=438728&postcount=16)

akira hanzo (http://forums.3dtotal.com/showpost.php?p=440017&postcount=132)

Rooky (http://forums.3dtotal.com/showpost.php?p=440153&postcount=147)

betasoft (http://forums.3dtotal.com/showpost.php?p=440313&postcount=156)

SubCroC (http://forums.3dtotal.com/showpost.php?p=439124&postcount=43)

Ian8811946 (http://forums.3dtotal.com/showpost.php?p=439460&postcount=78)

b3ta (http://forums.3dtotal.com/showpost.php?p=439464&postcount=79)

DerekSc (http://forums.3dtotal.com/showpost.php?p=439769&postcount=108)

H2O (http://forums.3dtotal.com/showpost.php?p=440568&postcount=190)

jelatin (http://forums.3dtotal.com/showpost.php?p=440689&postcount=202)



Winners

Bask (http://forums.3dtotal.com/showpost.php?p=439920&postcount=119)

Kaze_SR (http://forums.3dtotal.com/showpost.php?p=440452&postcount=181)


The winners can get in contact with ben@3dtotal.com and supply their contact details which CD they would like and which weeks challenge they were winners of we'll get your prizes out as quickly as possible.

[moleeth]

congrats Bask and Kaze_sr

woo i got my first runner up :smug:

[Mousek]

hmmm and i ? :) ok congrats winners.

[SubCroC]

congrats to winners and to all ,very nice work's been come out this week.

[b3ta]

Well done everyone, especially Bask and Kaze_SR - good stuff (another runner up for me too! yipee!!)

[hammering3D]

Congratulation winers Bask and Kaze_sr and other that got listed.

[Kaze_SR]

Wow, I cant believe it =)

Thanks everyone

This is too cool

[Ian8811946]

oh wow I got an honorable mention and runner up on my first contest! thanks! :drool:

congadulations Bask and Kaze_sr ;P

[Intersimi]

congratulations everyone

[al3x]

congrats everyone