Members Sculpting Videos!

[Tom-3DT]

Please use this thread to post videos of you working! html is enabled so you can try to embed them if you wish.

Many thanks, Tom

EDIT (MonteCristo) -- We just cleaned out some of the ealier messages so that we can keep this thread a bit more succinct. If it gets too convoluted it will take people ages to go through it all. :)

[grassetti]

Hey guys, last month i did some timelapse for pixologic never posted it here in the forum. Here is the direct link.

http://img.photobucket.com/albums/v632/gra3d/wolverine_blog.jpg
http://pixologic01.com/zbc/grassetti.mov

<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/cBRy9OROspA&hl=en"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/cBRy9OROspA&hl=en" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>

[Sathe]

"SuperSoldier"Entry part 1/4. 1 hour of progress.

<embed src="http://www.veoh.com/veohplayer.swf?permalinkId=v138602782pxpcfQs&id=1773626&player=videodetailsembedded&videoAutoPlay=0" allowFullScreen="true" width="410" height="341" bgcolor="#FFFFFF" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer"></embed><br/>
"SuperSoldier"Entry part 2/4. 2 hours of progress.
<embed src="http://www.veoh.com/veohplayer.swf?permalinkId=v14008984TWt5SHPX&id=1773626&player=videodetailsembedded&videoAutoPlay=0" allowFullScreen="true" width="410" height="341" bgcolor="#FFFFFF" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer"></embed><br/>
"SuperSoldier"Entry part 3/4. 3 hours of progress.
<embed src="http://www.veoh.com/veohplayer.swf?permalinkId=v140141872nM5ZMRC&id=1773626&player=videodetailsembedded&videoAutoPlay=0" allowFullScreen="true" width="410" height="341" bgcolor="#FFFFFF" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer"></embed><br/>
"SuperSoldier"Entry part 4/4. 4 hours of progress.
<embed src="http://www.veoh.com/veohplayer.swf?permalinkId=v14016944JXCRzy53&id=1773626&player=videodetailsembedded&videoAutoPlay=0" allowFullScreen="true" width="720" height="576" bgcolor="#FFFFFF" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer"></embed><br/>

[bgen]

My Veoh Sculpt CHannel http://www.veoh.com/channels/SpeedSculptC

well here is my third character of the sculpt challenge #3 - Part01
almost an hour in.
<embed src="http://www.veoh.com/veohplayer.swf?permalinkId=v13912573eYTM3zGx&id=12270962&player=videodetailsembedded&videoAutoPlay=0" allowFullScreen="true" width="600" height="499" bgcolor="#FFFFFF" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer"></embed><br/>
http://www.veoh.com/videos/v13912573eYTM3zGx

2nd hour of the sculpt.
<embed src="http://www.veoh.com/veohplayer.swf?permalinkId=v14018690apxrWbg6&id=12270962&player=videodetailsembedded&videoAutoPlay=0" allowFullScreen="true" width="600" height="499" bgcolor="#FFFFFF" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer"></embed><br/>
http://www.veoh.com/videos/v14018690apxrWbg6

3rd hour of the sculpt.
<embed src="http://www.veoh.com/veohplayer.swf?permalinkId=v1407990693rpMNhB&id=12270962&player=videodetailsembedded&videoAutoPlay=0" allowFullScreen="true" width="600" height="499" bgcolor="#FFFFFF" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer"></embed><br/>
Final and last part

<embed src="http://www.veoh.com/veohplayer.swf?permalinkId=v14085139MtgHT866&id=12270962&player=videodetailsembedded&videoAutoPlay=0" allowFullScreen="true" width="600" height="499" bgcolor="#FFFFFF" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer"></embed><br/>
Those u can'T view on Veoh
will upload the other 2 during the day.

Part01 http://youtube.com/watch?v=rDTRnM3OPNY
Part02 http://youtube.com/watch?v=kkVTotuThhc
Part03 http://youtube.com/watch?v=cqnAwt9S0gM
Part04 http://youtube.com/watch?v=DOW5EQ6XIcg

[vongn]

streaming supersoldier speed sculpting mudbox videos.

video 1

http://www.vimeo.com/1084612

video 2

http://www.vimeo.com/1089536

video 3

http://www.vimeo.com/1094936

[Tom-3DT]

So impressed with the work here I have linked this thread from the frontpage of 3DTotal and Threedy, everyone who has posted so far please claim a golden eye award! (http://forums.3dtotal.com/awards.php)

Tom

[Knut]

Impressive! I hope this thread Lives Long and Prosper™ :)

[mike_k]

Nice! hey grassetti are you sculpting with the layer tool there? or a really low fall off standard maybe, and what is the hotkey to jump between move and regular tool I think I can see you doing that quite a bit. cheers!

[skywalkerluis]

Hi guys, I´m Luis Fábregas and this is my speed sculp video of the "Old Catman" in youtube.

http://www.youtube.com/watch?v=iG_N70U6jTY

http://www.youtube.com/skywalkerluis

[chrisskinner]

Inspiring work guys!!! I wish I was at home on ZBrush now...

[ClassicGamer-3DT]

So inspiring guys, i'm so impressed with these, may many more be uploaded :)

Oustanding Stuff

CG.

[JHarford]

The sculpt

http://shinefx.net/personalviewer/images/SpeedSculpt_Supersolider.jpg

The videos

Part #1

<object type="application/x-shockwave-flash" width="569" height="328" data="http://www.vimeo.com/moogaloop.swf?clip_id=1088045&server=www.vimeo.com&fullscreen=1&show_title=0&show_byline=0&show_portrait=0&color=00ADEF"> <param name="quality" value="best" /> <param name="allowfullscreen" value="true" /> <param name="scale" value="showAll" /> <param name="movie" value="http://www.vimeo.com/moogaloop.swf?clip_id=1088045&server=www.vimeo.com&fullscreen=1&show_title=0&show_byline=0&show_portrait=0&color=00ADEF" /></object>

Part #2

<object type="application/x-shockwave-flash" width="569" height="328" data="http://www.vimeo.com/moogaloop.swf?clip_id=1090634&server=www.vimeo.com&fullscreen=1&show_title=0&show_byline=0&show_portrait=0&color=00ADEF"> <param name="quality" value="best" /> <param name="allowfullscreen" value="true" /> <param name="scale" value="showAll" /> <param name="movie" value="http://www.vimeo.com/moogaloop.swf?clip_id=1090634&server=www.vimeo.com&fullscreen=1&show_title=0&show_byline=0&show_portrait=0&color=00ADEF" /></object>

Part #3

<object type="application/x-shockwave-flash" width="569" height="328" data="http://www.vimeo.com/moogaloop.swf?clip_id=1090723&server=www.vimeo.com&fullscreen=1&show_title=0&show_byline=0&show_portrait=0&color=00ADEF"> <param name="quality" value="best" /> <param name="allowfullscreen" value="true" /> <param name="scale" value="showAll" /> <param name="movie" value="http://www.vimeo.com/moogaloop.swf?clip_id=1090723&server=www.vimeo.com&fullscreen=1&show_title=0&show_byline=0&show_portrait=0&color=00ADEF" /></object>

Parts 2 and 3 will load in about 2 hours time. Still converting
I would have posted a while ago, but conversion took yonks.
Hope you enjoy

[xmaster55]

Speed Doodles...
Hey you guys got some kool stuff here, awesome...


<embed src="http://img532.imageshack.us/flvplayer.swf?f=Tguymovvr6" width="424" height="338" type="application/x-shockwave-flash"/><br/>
<a href="http://www.imageshack.us/"></a>
<embed src="http://img532.imageshack.us/flvplayer.swf?f=T30minuteelf2movhz6" width="424" height="338" type="application/x-shockwave-flash"/><br/>
<a href="http://www.imageshack.us/"></a>

[Wilbert]

Simply amazing work in this post. I'm gonna get me Zbrush asap!

[Sathe]

Its probably better just to put it straight into the sculpting challenge thread. This thread may get pretty messy in the future.
Mods, Maybe its possible to have a couple of sub threads for this section if there starts to be many more videos.

[bgen]

ye i think so 2 Sathe - lets see what the admins think.

[Qbanpensil]

OH man :) this is my favorite part of the forum :) i love digital sculpting and all of you guys are very goods artist :) congratulation

[petz_e]

Is it possible NOT TO USE VEOH.

Veoh has blocked a lot of countries:

http://en.wikipedia.org/wiki/Veoh

[JHarford]

Is it possible NOT TO USE VEOH.

Veoh has blocked a lot of countries:

http://en.wikipedia.org/wiki/Veoh

please?

[Crispy4004]

A quick 17 min blitz to see how much I could accomplish in a short amount of time.

<a href="http://www.vimeo.com/1102073"><img src="http://img248.imageshack.us/img248/6038/testro7.jpg"></a>

[JHarford]

neolith, posted in the wrong forum ? Or did you have a video to go with that? Digging the hood anyhow.

[Diego.Floor]

wow! cool videos! :] it's fun to see other people working, glimpse at different techniques and stuff like that..

btw, I couldn't see the Veoh videos too. (not available for Brazil)

[Knut]

neolith, posted in the wrong forum ? Or did you have a video to go with that? Digging the hood anyhow.

Moved it to the proper thread :shout:

Awesome videos guys!

[DJdude]

some really nice vids here. waiting for more.

[AA-ron]

Could someone post the codes for embedding a video? I was thinking about doing one but wasnt sure beginning and ending codes.

Im guess this thread is for any sculpting video, not just for the sculpting challenges..right? Couldnt really tell by the first post.

[Tom-3DT]

Could someone post the codes for embedding a video? I was thinking about doing one but wasnt sure beginning and ending codes.

Im guess this thread is for any sculpting video, not just for the sculpting challenges..right? Couldnt really tell by the first post.

Yes it's for any sculpting videos, I'm not an expert on the embedding codes but I think the people who have done it so far get the codes given them by the site they have used to host the video....anyone else?

Tom

[aby arty]

how to capture vedio of our work?

[bgen]

how to capture vedio of our work?

u would use screen recording/catureing programs

- the free open source, CamStudio - http://camstudio.org/
- or good expensive one, Camtasia - http://www.techsmith.com/camtasia.asp
thoes 2 are the best for that kinf of screen captureing.

if u want more, just go through the list here.
http://www.download.com/Video-Capture-Software/3150-13633_4-0-1-0.html?

[bgen]

here my first hour of the fun sculpting.
A female warrior. not sure where i am going with it now, but here is the video with the interface folks.

<embed src="http://www.veoh.com/veohplayer.swf?permalinkId=v14127727CM9qwAxP&id=12270962&player=videodetailsembedded&videoAutoPlay=0" allowFullScreen="true" width="800" height="600" bgcolor="#FFFFFF" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer"></embed><br/>

http://www.veoh.com/videos/v14127727CM9qwAxP

[Crispy4004]

You really don't need outside recording software. Zbrush 3 has a movie feature. Just hit record before sculpting, and forget about it.

[Teyon]

Completely random head I made. No real thought into it but I figured I'd share a video. It's at 12fps so it's easier to follow.
<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i188.photobucket.com/player.swf?file=http://vid188.photobucket.com/albums/z238/the_3dartist/random_002.flv">

[pap87]

I thought I'd contribute. This is the first time I've ever recorded using the zbrush built in recorder. It's a female sculpted using the basemesh provided for the last few challenges.

Hope you like.

<embed src="http://www.veoh.com/veohplayer.swf?player=videodetailsembedded&type=v&permalinkId=v14145487WNCXZPGj&id=3018811" allowFullScreen="true" width="410" height="341" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer"></embed><br /><br/><a href="http://www.veoh.com/">Online Videos by Veoh.com</a>


EDIT: Due to problems with Veoh in certain countries, here's the same video hosted with vimeo. Hope this works for you guys.

EDITno2: It seems I couldn't get it to embed properly, oh well, here's the link then.

http://www.vimeo.com/1158737

[xmaster55]

SUBTLE DETAILING of a Female Head... 8 fps. I wanted to show you guys how i really work, when i working on a realistic character. The vid quality is pretty low, however, if you like to see the High quality vid just say so and i will give you the download link. Hope you like it. :)


<embed src="http://img532.imageshack.us/flvplayer.swf?f=Trealisticfemalemovim9" width="424" height="302" type="application/x-shockwave-flash"/><br/>
<a href="http://www.imageshack.us/">[Upload your own video]</a>

[Nima_3dman]

Is it possible NOT TO USE VEOH.

Veoh has blocked a lot of countries:

http://en.wikipedia.org/wiki/Veoh

yeah, all the videos on Veoh has been blocked for me too...
anyway, thanks for sharing

[cojoMan]

I subscribe about VEOH being blocked...such a shame
I am missing on a lot of good vids....:(

[pap87]

Ok, I'm guilty of using Veoh. However I have now also put my video on vimeo.
I've updated my post above, whoever's interested.

[Katonc]

Timelapse here (http://youtube.com/watch?v=T6yu4Y3wRqM) Unfortunately, i lost the first part due to Z3 crashing when i went to save it.
118111

[cojoMan]

thx guys...
any real world toons around here ?

[pap87]

Here's my timelapse video of Asterix which I made for the realistic cartoon challenge. It covers the full 3 hours 50 minutes or thereabout. Hope you like it.

http://www.vimeo.com/1230508

[AA-ron]

Very nice recording on your sculpt pap87! Thanks for posting, it helped me to understand better on how to sculpt the eye socket areas.
What alpha did you use to detail the hair clumps with?

[pap87]

Glad it helped you AA-ron. I used alpha no. 54 which is the one with the circles in a horizontal line going from small to big to small again, just in case my no. 54 is not the same as your no. 54. I also set the stroke to freehand, I just like it better that way.

[Sathe]

Great contribution Pap, good luck with the voting ;)

[Hex0254]

Grassetti, You have some amazing work in you portfolio! Where did you go to school?

[Sandpiper]

Here's the technique I used to create some of the rock formations in a couple of my sculpts. It's not glamorous like a typical human character but something else that Zbrush can do! :) (the real "meat" is after the first couple of minutes of course)

<object width="425" height="350"><param name="movie" value="http://www.youtube.com/v/_VtxPTfUKCQ"></param><embed src="http://www.youtube.com/v/_VtxPTfUKCQ" type="application/x-shockwave-flash" width="425" height="350"></embed></object>

[AA-ron]

Thanks for the tip pap87, I think thatll help add some good detail to my next model.

Sandpiper - Nice technique, bit more free than using alphas.

[kazmamurat]

here is timelapse video of angel for sculpting challenge 006, part 1;

http://www.vimeo.com/1395013

part 2;

http://www.vimeo.com/1399907

[AA-ron]

Im curious, what kind of format are you all exporting your timelapse Zmovies as? Im having a hard time finding something thats small enough but doesnt devistate the movie quality.

[cojoMan]

@kazmamurat : and part 2 of the process ? we're looking forward to it ;)

[Pedro Toledo]

kazmamurat - the model looks really good, and you sculpt in a very fluid, natural way. Top quality :)

[platypus_green]

Speed sculpting challenge 06.
First time i've tried using the timelapse feature of zbrush.

Part 1/3
45 minutes into the sculpt.
Got the proportions roughly blocked in.
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/645cEGhv4mQ&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/645cEGhv4mQ&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>

Part 2/3
2.5 hours into the sculpt. 1,5 hours remaining.
Most of the major forms added.
Hands still need to be sculpted.
Hair needs a lot more work.
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/zrhcB1CIIsY&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/zrhcB1CIIsY&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>

Part 3/3
4 hours reached.
Would have liked a little more time to refine the details and use the other eye and teeth meshes for more cloth.
But got most of what I wanted to do done.
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/BjJPNL3lkcc&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/BjJPNL3lkcc&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>

Final Turnaround
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/vc5gr_fhUt4&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/vc5gr_fhUt4&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>

[cojoMan]

nice one.
good job ;)

[xmaster55]

Hi guys, here is another speed sculp. 35 minutes...
enjoy :)



<embed src="http://img532.imageshack.us/flvplayer.swf?f=Tspeed4movky3" width="424" height="302" type="application/x-shockwave-flash"/><br/>
<a href="http://www.imageshack.us/"></a>

[AA-ron]

Maybe I missed it, but what are the codes to embed youtube and veoh vids?

[pap87]

If you click the "Quote" link in any post with an embedded video in it you will see the exact code required to embed the video.

[AA-ron]

Cool cool, thanks pap87, I should had thought of that earlier.

[Crispy4004]

Been a while since we had any new videos so I decided to put something together. The torso seems to be a struggling point for a lot of us, so I threw together this rough torso timelaps to help myself and hopefully some of you watching.

http://img225.imageshack.us/img225/6100/torsofj5.jpg
<object width="400" height="300"> <param name="allowfullscreen" value="true" /> <param name="allowscriptaccess" value="always" /> <param name="movie" value="http://www.vimeo.com/moogaloop.swf?clip_id=1525303&amp;server=www.vimeo.com &amp;show_title=1&amp;show_byline=1&amp;show_portrait=0&amp;color= &amp;fullscreen=1" /> <embed src="http://www.vimeo.com/moogaloop.swf?clip_id=1525303&amp;server=www.vimeo.com &amp;show_title=1&amp;show_byline=1&amp;show_portrait=0&amp;color= &amp;fullscreen=1" type="application/x-shockwave-flash" allowfullscreen="true" allowscriptaccess="always" width="400" height="300"></embed></object><br /><a href="http://www.vimeo.com/1525303?pg=embed&amp;sec=1525303">Link</a> from <a href="http://www.vimeo.com/user514249?pg=embed&amp;sec=1525303"> </a> on <a href="http://vimeo.com?pg=embed&amp;sec=1525303">Vimeo</a>.

[robinmitra1]

amazing guys :D...best zbrush thread ever !

[Sandpiper]

Here's the videos of me sculpting my entry for the pirate speed sculpting challenge.

Part I:
<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/aGnSZ1E6Vz0"> </param> <embed src="http://www.youtube.com/v/aGnSZ1E6Vz0" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>

Part II:
<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/LDPo1JHkWlY"> </param> <embed src="http://www.youtube.com/v/LDPo1JHkWlY" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>

[ShadowBoss]

this is sick! Being new to 3d this sculpting vidz are very helpful! Thanks for posting!

[AA-ron]

Really nice work Sandpiper, concept, detail and pose are great.
I have a couple questions...how did you activate symmetry even though your model is asymmetrical and what kind of export settings did you use for your zbrush recording?

[skywalkerluis]

Hi, this is my last sculpt on zbrush. I did it in 2 hours 13 minutes.
Final render (zbrush) and video. Enjoy!!!


http://www.youtube.com/watch?v=UQ0oxvtKryM

[bryzol]

Here is my video from last sculpting challenge (011). Unfortunately I've lost first part of the movie in wich I'am shapeing this head from the sphere base mesh. There is some error while loading zBrush movie file :(

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/uPN-0RiVumw&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/uPN-0RiVumw&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/U0Ti6Rf05lM&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/U0Ti6Rf05lM&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

[bigd17]

These videos are amazing.

Really great to watch and learn from the masters!!

Can I just ask........... What sort of resolution mesh are you guys sculpting with?? From the vids it looks high. Just curious as to peoples' work flow really.

[Teyon]

You start low and work your way up the resolutions, building form as you go.
<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i188.photobucket.com/player.swf?file=http://vid188.photobucket.com/albums/z238/the_3dartist/tooth_fairy.flv">

[Freespace-3DT]

You start low and work your way up the resolutions, building form as you go.
<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i188.photobucket.com/player.swf?file=http://vid188.photobucket.com/albums/z238/the_3dartist/tooth_fairy.flv">

That was really cool.

[Teyon]

Thanks :)

[bigd17]

Hi Teyon,

Thanks for the advice, and fantastic video. Great character!!

[Teyon]

Glad to have posted and thanks for the compliment. Here's the base (http://www.art-by-teyon.com/alex_base_bust.zip) for anyone that wants to try it out.

[Adroit.jrk]

Teyon woooo amazing.

[CHAO5]

good job Teyon

[CHAO5]

speed sculpting challenge #14 "EINSTEIN" :crazy:

TIMELAPSE
http://www.youtube.com/watch?v=BJBEjEyyQu4

[CHAO5]

speed sculpting challenge #14 EINSTEIN_details

TIMELAPSE
http://www.youtube.com/watch?v=rmjq7JqNEZY

TURNTABLE
http://www.youtube.com/watch?v=QisTalcLxu4

[mdale13]

Hello everyone!

Here is a timelapse of an elven shield. I posted another one of these (much better actually) on ZBC and got a request for a tutorial, so I taped this, and I thought I'd share it with you guys!

http://www.youtube.com/watch?v=AV0LMAAvCGI&feature=channel_page

[robinmitra1]

cool vids..thanks everyone!

[Longhi]

Hey folks, nice videos around here!

I did this speed for a workshop that I'll do next month here in Brazil, so I'd like to share it with you guys!

You can download it here
http://longhifineart.com/fineart/albums/free_stuff/speed_modelling_vamp.rar