View Full Version : SMC M#03 - Hammering3D - iVee
21-01-2010, 08:09 PM
I finally have time to join in.
I like so much what others have done so far :eek:
Here is my progress, 1 hour and 20 min so far... hope to speed the work with the progress and finish it in time...:roll:
21-01-2010, 08:19 PM
Nice start :)
22-01-2010, 06:48 AM
2h and 10m so far, pretty slow but I guess I have the time for finis :crazy:
My bad thing is that I don't plan so I lose time, but well the shape is finish I just need to add details, and change the shape a little like I have the concept in mind make it a little more future look like. :ufo:
22-01-2010, 06:59 AM
22-01-2010, 11:01 AM
cool, get some quick guards on the front, just spline them
22-01-2010, 11:03 AM
tnx, is just what I am working at in the moment, not spline but poly, but will work fine, and some spring from splines
22-01-2010, 11:09 AM
22-01-2010, 01:08 PM
Ok, I spent 3h on this, so 1h for weapons and final tweeks :roll:
It's pretty close ... :crazy:
22-01-2010, 02:46 PM
Wow hammwering, that is looks really good. I like the attention to detail, esp with the brake pads and stuff. Are you planning to mount any weapons on it?
22-01-2010, 02:54 PM
tnx, I working now at weapons but I lose to much time with those details U speak of and I am very close to not finish it hope I do...
the details are more like eye candy :D not to much, just some boxes and cylinders with extrudes, but they look ok down there...:D
22-01-2010, 04:43 PM
After redoing the weapons couple of time to done them in time, and using allot of cloning and duplicates, I finaly manage :crazy:
I have 5 minutes left :D and I don't know what to do with them, I wish I had an interior to, but no more time, I think I try to make an floor of the car using an plane and couples of planes to make the wall inside the car and make the windows less transparent or very dark to not be see inside very clear.
Very nice :)
if you still have 5 mins... do windows, headlights, and close the engine hole. And maybe put a box over those springs. Just for the effect. And if you still have time... rear mirror. That would be a nice touch.
Use low angle camera so its not visible there is no floor or interios, something like you have on the bottom picture :)
22-01-2010, 05:10 PM
tnx japo :D
U enter this time in ? u'r render and modeling style it will be a great adition to the amzing models that people done so far
- the windows are modeled, since I detach them from the mesh to make the hole, but I hide them to show the model
-mirrors and headlights and back lights I don't think I have have time for them... :(
- I will use planes for walls, for cover the engine hole, a box for spring yeas I will copy something from the weapons :D
I go take some fresh air and eat something then I will see :D the miracle of the 5 min :))
I think I will create something. Originally my idea was Panzer IV, but that was too real. I still intend to go in similiar direction. Though competition is really tough. By the way... I would not have dared make humvee. 4 hours time and I wont dare an auto. I must fear them. :dunno:
Anyways... headlights for this should be rather easy. (i just checked how humvee lights look like). Scale a sphere by one axis so it looks like lens. Place it on a cylinder with diameter slightly exceeding that of the lens (if you want to keep with smooth edges you have now, use chamf. cylinder). Place cylinder on a box... and you have headlights set. Now its just about copying (and texturing). Or thats how I would do it if I wanted very very fast humvee headlights. Light should do the rest :)
I would not bother with tail lights as that part may not be in the scene. And as for rear mirror, well you will see how much time you have left.
22-01-2010, 08:43 PM
hehe, tnx for tips, yes the headlights are round and simple ... I will try like U said
I did't do anything so far, I think I am scared to :d by the textures or shaders :d I hate them :P
I was scared to by the hummer, I many time wanted to model one and I was scared by the details and said it will take me to long, and now model one in a speed modeling :D, but well it's very stylized :D
22-01-2010, 08:46 PM
uve done a good job
22-01-2010, 08:47 PM
22-01-2010, 10:13 PM
Ok that's it ... it's finish
After Japo advice I made the headlights, then I put an box and 2 cylinders from the lights instead of engine box and springs ending.
Then I made 2 planes one for the inside and one for the bottom of the car... I create the plane then with shift and drag I multiply the edge after the car shape from the left viewport.
Tomorow the less fun part from me... the texture :shy:
23-01-2010, 01:11 PM
looking nice man :)
23-01-2010, 01:25 PM
thank U sergov
An update ... I think is pretty done, maybe some suggestions ? :roll:
23-01-2010, 01:31 PM
looking very nice
Trying making the guns a different colour see if that helps
23-01-2010, 01:34 PM
thank U Tarik2d, I see they are looking more like plastic, I will try other shader
23-01-2010, 02:11 PM
look like a toy for angry kid =)
25-01-2010, 03:56 AM
Very nice. Cheers.
Such an awesome model - great job :wave:
25-01-2010, 07:27 AM
thank U guys, I will try to improve the renders and make it final.
30-01-2010, 09:36 PM
And here are the finals.
I am stupid at texturing and after many tries the best combination was with the weapons black :evil:
30-01-2010, 09:43 PM
30-01-2010, 09:44 PM
30-01-2010, 09:59 PM
30-01-2010, 10:01 PM
Witch wire should I chose for final tread ? :D
30-01-2010, 10:19 PM
just one showing the entire model, if the judges ever come down to check it in detail they always have your w.i.p thread
30-01-2010, 10:23 PM
tnx, I will see till the final entry thread will be up.
30-01-2010, 10:24 PM
plenty of time :) tomorrow is the 31st
30-01-2010, 10:24 PM
I know, I can't wait for the next comp to see the subject ;P
It was armagedon then after the armagedon, maybe not the rebuild :D
30-01-2010, 10:26 PM
adam and eve time :) repopulating the earth
30-01-2010, 10:30 PM
hope not, cause I can't model organics, maybe I will model the apple tree or the apple or the snake :D, or leader to heaven ...
30-01-2010, 10:35 PM
babies :) baby bottle, toys, undies etc
30-01-2010, 11:43 PM
Just for fun :crazy:
30-01-2010, 11:49 PM
throw that into z-brush and you got your self a regular G.I.Joe
30-01-2010, 11:53 PM
z-brush is not for me :D, I still have nightmares since I last try it, I do therapy :D ;P
30-01-2010, 11:57 PM
i shall never mention ******** in your presence ever again:halo:
30-01-2010, 11:58 PM
31-01-2010, 12:44 AM
BTW rocneasta, why U did't model something ?
31-01-2010, 12:46 AM
31-01-2010, 12:48 AM
BTW rocneasta, why U did't model something ?
Been working day and night to finish a project i've contracted to do by my company for which i start working full time day after tomorrow. Good thing is i'll be able to work from home and only venture to the firm to give lectures, attend meetings so it's all good.
plenty of time to answer few mails and model at the same time
31-01-2010, 12:53 AM
Ohh, being busy with work is good think, I was hit by the world wide crisis :D, that's why so much time, hope to be busy soon :D
31-01-2010, 12:57 AM
hit the crisis back or do freelance stuff. this is what i'm basically doing now and will continue.
even with this project, the company is paying me via contract for this project and the monthly paycheck is not a part of it.
31-01-2010, 01:03 AM
yes I did that, had 3 company with constant work monthly. Not time for others,
Then I give up one company cause they take me to much time for the money they provide, and was before the crisis and I said is easy to find other in place and I remain with 2.
Then the crisis hit and one company got bankrupt and one lower the payment very very low.
But I will search for others.
Till then I live from the social help of my cat :)) ( kidding)
by the way man, very good work, you have impressed me this time, i can see the crisis has good influence on you (until we ran out of money and we end up begging at the subway ahahahahha), but i'm sure that if you practice more you will get good in 3d and get the perfect job :)
@rocneasta congrats for your job man :)
31-01-2010, 01:16 AM
yeahm I will take the lazy cat and go to subway to beg for money and charge couple of euro cents for petting the cat :D
31-01-2010, 01:21 AM
@rocneasta congrats for your job man :)Cheers
Thanks, it's just a regular job loads of responsibilities and i'll see how they respond to improvements; if it's not followed by a larger pay i'll soon find my way out of there
atm it's a job where i get payed for the skills i currently have, i can sharpen them in few areas and learn a few things theory and experience wise. main goal is to do as much of 3D as possible in the time i spend there and my spare time & to further educate my self. but i'll see how it goes and how they respond to my input
@ hammering3D - try walking cats or dogs for a while if that's payable! since i'm sure petting other people cats is not or perhaps is considered a violation of privacy :p
Hammering dude, i'm sorry to announce you but Muculet did a little visit to your car... and... there is nothing really that bad... yeah... just as you see in picture, now is more fun an joy :D, he was just playing you know:crazy:
31-01-2010, 01:43 AM
I will take my G.I Joe soldiers and hunt down that furry ball :D
31-01-2010, 01:47 AM
ohh boy, this image is priceless
31-01-2010, 02:15 AM
nice work J.B.
vBulletin® v3.7.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.