needse's wip

[needse]

thought i would start a wip thread i will post everything im up to in here

[needse]

this is a mech walker leg im working on it will be fully rigged with pistons /springs /hoses etc i will keep posting updates

[Matt636]

looks good. any sketches or images of what your aiming for in the end?

p.s. love the hoses

[needse]

nah i am just making it up as i go along at the moe, maybe a spider type droid or something

[needse]

update

[needse]

another update

[needse]

update

[JoeLaFrite007]

You must be working in mechanic engineering :D (or you'd made studies of this subject). I love the realism you're putting in this scene !

I don't understand the use of 2 pistons for the end arm... the top one is enough i think.

[paulius-st]

nice modeling you have there :) . i like the functionalitie, but i agrea with JoeLaFrite007 about the use of two rows of pistons, and disagrea about the top one to be enough. i'd say lower ones are enpugh cause in real life enginiers wont put them in to cause the forses that pistons should handle are way bigger on top of the mechanism than i lower part. and the second point it would require quite good timing and aditional electronics to sinchronise these pistons so they would'nt fight with each other when working. so i'd advise you to put bigger pistons in the bottom and if you want more details and more parts in top so put some guns for god's sake :D . guns allways look cool and gives you more points for your work :) .
good luck on this one.

[I_AM_DAVE_COX]

Ok you have my attention.

[Tarik2d]

Really nice :) is it all rigged :) and the pipes move?

[needse]

CHEERS FOR COMMENTS

the secound piston is there just for extra animations sake i am just making it up as i go along im gonna post the rig on youtube soon and will post llink
heres a quick paint of wot i might go for if anyone has got any suggestions please let me no im getting stuck at the moe cheers again

[needse]

rig here http://www.youtube.com/watch?v=4bQGPquin74



does anyone no how to put a picture on my post coz at the moe it just says needse wip no pic ;-(

[needse]

paulius-s "put some guns for god's sake"

dont worry my friend there will be guns big guns just not sure where to put them yet

[needse]

nother update

[I_AM_DAVE_COX]

So cool!

[needse]

more updates

[Tarik2d]

wow, how u doing this so fast lol, its looking good. u going to texture it when its done?

[needse]

lol i thought i was going slow. i will try and texture !!!! but my texturing sucks

[needse]

your more than welcome to unwrap this puppy if ya like lol

[Tarik2d]

lol, I actually would if i got to texture it

[needse]

lol ill hold you to that

[Tarik2d]

I hope u do ;)

[needse]

not sure on it yet having trouble working out a good foot (pistons ,gears) if any ones got any ideas please share them cheers

[needse]

some more updates
NEED HELP ON THE IDEAS NEEDED :wall::wall:

[Scrat_SG]

That is extremely impressive. Got any wire shots?

[needse]

WIRE still the whole model needs cleaning up but here it is

[needse]

update 16 hours so far

[needse]

render

[needse]

sorry if i am posting to many updates but here's foot test 1 i don't really like it wot do U's think ?:wall:

[needse]

RIG UPDATE HERE = http://www.youtube.com/watch?v=NJzFmvObzFY

[SgtHK]

The foot looks solid. But I don't think it can move around realistically with the ball-joint alone. You might wanna add a few more pistons around it to give it power, maybe 3 or 4 pistons.

EDIT: I watched the video. I have to say the rig looks really good indeed. Everything looks properly in place.

[Scrat_SG]

Dang that looked briliant, wish I new how to rig like that.

[needse]

[QUOTE=SgtHK;836354] But I don't think it can move around realistically with the ball-joint alone. You might wanna add a few more pistons around it to give it power, maybe 3 or 4 pistons.

yeah i will do something like that just wanna get the foot right first im on it today


Scrat_SG this sort of rig is not very difficult if ya know how i will post a proper tutorial for rigging the whole arm as soon as i have time

heres one i made the other day for pistons but its not very clear

http://www.youtube.com/user/needse1?feature=mhum#p/a/u/2/13-MRnL0ruE

[Lord_doin]

lookin good
btw, I think that if you upload a pic to your first post, that it makes a thumbnail for the forum-overview

[needse]

yeah thanks that worked

[Lord_doin]

no prob

[gfxengine]

Looks great man, keep it comin :)

[Scrat_SG]

[QUOTE=SgtHK;836354] But I don't think it can move around realistically with the ball-joint alone. You might wanna add a few more pistons around it to give it power, maybe 3 or 4 pistons.

yeah i will do something like that just wanna get the foot right first im on it today


Scrat_SG this sort of rig is not very difficult if ya know how i will post a proper tutorial for rigging the whole arm as soon as i have time

heres one i made the other day for pistons but its not very clear

http://www.youtube.com/user/needse1?feature=mhum#p/a/u/2/13-MRnL0ruE

Thanks needse.

Actually bookmarked that one as I'd also like to at some point create and animate some sort of robotic machine. Looking forward to the proper tutorial.

[needse]

added a gun a bottom don't really like it there but ill move em about later, still gotta sort out the ankle area and feet then ill start on the body hmmmmmm any ideas' for shapes ?

[Tarik2d]

omg u crazy man, u model fast. Ive got some kick ass ideas for texturing it ;)

[SgtHK]

Seeing as you have all entities visible at once with the hardware shader + AO enabled and stuff you must have a hell of a video card.

[needse]

Seeing as you have all entities visible at once with the hardware shader + AO enabled and stuff you must have a hell of a video card.

no m8 my system is a dell xps 8000 ,6 gig ram ,i7 860,nivida gt 220 i payed £900 for it its a godd little machine

[needse]

omg u crazy man, u model fast. Ive got some kick ass ideas for texturing it ;)

lol thanks m8 yeah cant wait to get to that stage lol

[xyzr]

Almost like a Cathedral forged in metal, it's so beautiful that it doesn't even need textures!

[needse]

Almost like a Cathedral forged in metal, it's so beautiful that it doesn't even need textures!

thank you my friend best comment ever pmsl

[needse]

ouchh that hurt, but done now:dance:

[needse]

i might make it a gaint walking gun

[SgtHK]

I want moar gunz

[danghuynh]

awesome

[I_AM_DAVE_COX]

I am not going to lie.

When I first saw this thread I thought cool but we will never see it finished.

You have done very well in proving me wrong man! I can't tell you how cool this is!

I love it!

[Scrat_SG]

I think take the guns you have at the bottom and make them bigger than put them on-top instead.

[needse]

been having a nightmare all my pistons and links went crazy in my foot but fixed now so back to modeling just a small update of the side not sure if i like it yet i may change it i will post a link to the foot rig soon

[Tarik2d]

Looking forward to seeing this bad boy walk, its a fast interesting project :)

[needse]

lol sorry i couldn't resist

[needse]

six legs or four or eight lol ? wot do you lot think?

[needse]

sorted the mesh out heres the foot rig http://www.youtube.com/user/needse1?feature=mhum

[needse]

sorted the mess out heres the foot rig http://www.youtube.com/user/needse1?feature=mhum

[Tarik2d]

6 legs and a rigging tutorial ;)

[needse]

lol yeah i will do one for ya soon def, basically the pistons are all "look at constraints" and everything is linked correctly and pivot points set correctly then if all setup right when you rotate a piece everything else follows and pistons do the job on there own. simple lol

[xyzr]

Such a wonderful structure for just a couple of, big, guns?
Naaah, it deserves something more elaborate.
My suggestion is to look for inspiration to the top structure
of one of those Russian Cold War battlecruiser (es. Kirov class).

Keep up the good work!

P.S. six legs, arranged along a circular pattern.

[needse]

thanks xyzr. i am still working on the shape of the body its defo not gonna stey as it is , im doing some different sketches now then will post them all and see what peeps think and i am looking around for inspo for a massive weapon ;P,
heres 1 quick sketch haven't added guns or details yet but will do

[needse]

if any one feels like doing a paint over off a nice top half that would be much appreciated as im having reel trouble creating a body that matches the legs:wall::wall: i really want to get this project finished

[folktrollish]

like an horned beetle

[Scrat_SG]

Just watched the video for the foot rig and can't wait to see the tutorial for the rigging. I'm just completely stumped as to how you got the wires/pipes on the foot to move/deform like that.
Really awesome work man and hope you come up with a brilliant body design, unfortunately can't give any ideas.

[needse]

like an horned beetle
thanks for that folktrollish that's really nice i like it ,i might do a version like that as well again thanks for that i didn't really expect anyone to do it :dance:, its the body structure where i am having design problems,i want it really mechanical similar to to legs (moving parts more pistons ,hose's etc ) maybe i am trying to hard on it and i need to think more simple but i think anything else and the legs would look out of place i dunno :wall::wall::wall::wall: these are the problems when you design things as you go along (now i am stuck wanna finish this )

[needse]

I'm just completely stumped as to how you got the wires/pipes on the foot to move/deform like that.


well its a simple hose primitive /bound to objects (say two boxes) top and bottom then move top object and watch the hose follow!! magic. if ya still stuck shout me and ill make a quick vid to show ya :wave:

[Scrat_SG]

Thanks needse.

You sure are an awesome inspiration.

[xyzr]

http://www.wartsila.com/Wartsila/global/img/pics/press/releases/W_6L_20L.jpg

Just replace the (6) legs ... et voilà, Masterpiece! :dance:

:D

[paulius-st]

cool progress :). its starting to look like the spider robot from the movei wild wild west :). as for leg rig - nice. but does it have ik system, ik/fk blend, and so on. and some atribute holders to ceep some animation presets of the fut to make work faster? cause it would be a pain to animate it part by part. it would look realy awsome if the other parts would move along. like when its leg bends the other parts rotates coresponding to it. :) . but it doesnt change the fact that it looks realy cool :)
good luck . will ceep an eye on this one.

[needse]

http://www.wartsila.com/Wartsila/global/img/pics/press/releases/W_6L_20L.jpg

Just replace the (6) legs ... et voilà, Masterpiece! :dance:

:D

nice image ill defo use some of the stuff on there :dance:

[needse]

but does it have ik system, ik/fk blend, and so on. and some atribute holders to ceep some animation presets of the fut to make work faster? cause it would be a pain to animate it part by part. it would look realy awsome if the other parts would move along. like when its leg bends the other parts rotates coresponding to it.



thanks paulist-st m8
yes it will have a hi solver for ease of animation and i will set up some sliders as well at the moment im having a slight problem when i apply the hi solver it defroms the mesh slighty when i rotate even when i have rotation locks on im just trying to get over that then illcarry on modeling again

[needse]

haha sussed its no more deforming ik working now will post update on you tube soon just rigging the toes now

[needse]

foot ik here http://www.youtube.com/user/needse1?feature=mhum

[Scrat_SG]

Hey needse, see you're talking about sliders, do you happen to know of some good tutorials for creating sliders? If not please include that into your tutorial you'll be creating pretty please with cherry on top :D.

[needse]

im looking for some myself at moe when i find a good one ill link it here

[rocneasta]

foot ik here http://www.youtube.com/user/needse1?feature=mhum

nice, just subscribed to the channel - keep them videos coming :)

[needse]

leg slider steup here http://www.youtube.com/watch?v=ZYLvaz8ScaM

[needse]

cheers rocneasta thanks m8

[needse]

just made a slider tut for ya's as well here http://www.youtube.com/watch?v=qJ_h3ydyaPM

[Scrat_SG]

Thanks needse.

[needse]

toe rig here http://www.youtube.com/watch?v=0o-Vraa1NU4
nearly done i think with the rigging some slight issues but nothing major

[Scrat_SG]

WOW, and I don't mean the game, I mean you :D.

[needse]

hose tutorail here http://www.youtube.com/watch?v=bQUABXSNLm8


and spring tut also here http://www.youtube.com/watch?v=M2SyiBNjOMs

[stickyPixel]

Whoa. That's incredibly detailed, I like how it's shaping up. I'll have to check out some of your tutorials. Thanks for commenting on my thread by the way.

[JoeLaFrite007]

Amazing details !!! You're always putting a bit further the limits !!!

Thanks a lot for your video tutorials : straight to the essential ;)

[needse]

Thanks a lot for your video tutorials : straight to the essential ;)

my pleasure

[I_AM_DAVE_COX]

GAH!

I have so much to learn :)

[needse]

GAH!

I have so much to learn :)

dont we all m8 i dont think we ever stop learning :dance:

[needse]

GAH!

I have so much to learn :)
here you go dave learn this one ;)

pistons with ball joints tutorial here http://www.youtube.com/watch?v=LKG5aX0KYl8

[I_AM_DAVE_COX]

Thanks man! I will have a play this week!

[needse]

yeah enough tuts i think i got carried away with em lol
back to what i was doing, the body and my bamboo has just ****** up on me so no sketching for me :wall:

[ZenMan]

Great work, so detailed as well =) keep it up!

[needse]

will do cheers zenman

[needse]

just had to finish up a website and a day at paintballing back now so game on again will post some updates later

add me on facebook =http://www.facebook.com/needse

[needse]

spider rig i set up a while ago i might try and mod this rig for the machine http://www.youtube.com/user/needse1?feature=mhum
and iam still stumped on the body brains not working today

[needse]

been busy with a few bits i will be coming back to this real soon

[needse]

ive had a few little jobs come up so ill back to mech walker thing soon, so heres a few renders of a little droid animation im also working on ,animation tests can be viewed here http://www.youtube.com/user/needse1?feature=mhum
crits and comments always welcome

[needse]

.

[needse]

more wips

[Sathe]

The attention to detail on the robot scene is really great but the robot itself lets the scene down. Not sure if you still have to texture/shade him (don't have time to read through the thread) but it is definitely looking pretty badass/

[Scrat_SG]

Love the train.

[needse]

thanks sathe cheers for all ya comments. yeah the little droids just a test really just simple Grey shader with a bit of spec on it ,i am going to model him a bit better and texture him prop when i got some time ,as for thee work i got a interveiw this friday so fingers crossed peeps:dance:

[needse]

cheers Scrat_SG

[needse]

little robot concept sketches

[Scrat_SG]

Well needse, Good Luck on the job interview!! Holding both thumbs for you.

Love the robot designs, might actually like to model 1 or 2 of the smaller robots for practice purposes.

PS.
My thumbs are starting to go blue, :D anyways on a serious note I really hope you get the job as jobs are hard to find nowadays.

[needse]

lol thanks alot m8
yeah feel free ta model the little dudes make sure ya post em on here though:D

[Scrat_SG]

Oh yea, if I do get around to do some of them I'd definitely post them with full credit to your designs.

[needse]

ive been thinking about the walker thingy and i might steampunk it, good idea or has this subject been killed lately ?

[SgtHK]

You should do what you think is cool, man. :)

[Scrat_SG]

Don't think steampunk will ever die, looks too good :)

[needse]

no updates for a few days back to painting and decorating gotta pay the bills some how:ugh:

[needse]

demo reel kinda old but just keeping me thread alive for a few days till im back on it
http://www.youtube.com/user/needse1?feature=mhum#p/u/0/ix3UUc2C8Kw

[needse]

my weekly photo challenge entry

[I_AM_DAVE_COX]

That's pretty cool man!

[needse]

i got the job:dance: maybe there is a god

[rocneasta]

GZ needse, well done!

[Scrat_SG]

Congrats needse.

[SgtHK]

That's awesome, dude. And I like the church, too :D

[Neil_F01]

yeah hey man.. since you stopped by my wip i thought it only right that i have a look at yours... loving the work btw.. awesome stuff..

i do think that after i've finished my current wip i might move onto something similar to your big giant droid thing... love how you rigged it all up.. awesome..

[I_AM_DAVE_COX]

Well done man! Who is the company?

[needse]

dave sorry for late reply ive been busy with the work:wall:
and thanks

[needse]

is this thread still alive if not check out tuts and stuff on my you tube page here http://www.youtube.com/user/needse1?feature=mhum

[rocneasta]

cool animation, was just looking for your threads needed some info on the IK...

[needse]

rocneasta let me no if i can help mate

[rocneasta]

will do, researching for now.

cheers

[needse]

been a while so though i would add some Wip's Crit's welcome

[needse]

test

[needse]

test1

[needse]

test2

[needse]

test3

[needse]

bvs10 wip

[parleee]

<cry>cry</cry>

[needse]

more wip's

[ClassicGamer-3DT]

Some truelly incredible modelling, you've got some skills!!!

[needse]

.

[cdavidson]

inspiring stuff!

[needse]

more Wips crits welcome

[needse]

.

[needse]

gonna get back on the droid walker thingy over the weekend so updates soon

past few models here i spent two days modeling on each

[Neil_F01]

thats some great work..

[needse]

quick paint over test don't crit is not staying (its not a red arrow lol )

[Neil_F01]

it does look like a red arrow. .lol..

[needse]

lol yeah i know but then i realized red arrows don't have anything mounted on the wings and the nose is slightly different this is a hawk mk200. i think red arrows are a different markt1 or something .i am still having a read up

[dridri123]

Hey nice job man. ;)

I like the details on your model.

[needse]

volvo yacht game model work in progress

[cdavidson]

are you able post more wires with your work buddy? just with learning this its nice to see the wires/process lol

[needse]

the model is abit heavy but going over it again so i will lose a load of polys its around 24000 polys with sails does sound like alot im new to game modeling ?

[needse]

chelsea football 3d club logo

[Neil_F01]

looks good.. shame about the team though.. urrrkkk :0~#####

[needse]

its a 3d forum not a football forum so will have none of that sir lol

[Neil_F01]

its a 3d forum not a football forum so will have none of that sir lol

:p

[poopipe]

the model is abit heavy but going over it again so i will lose a load of polys its around 24000 polys with sails does sound like alot im new to game modeling ?

for rigid, unskinned geometry no , that's not a lot - it depends hugely on context though.

it could be more efficient as a mesh mind..

[needse]

poopipe yeah still im working on me mesh efficiency not used to low poly stuff. ive got the mesh down to around 12000 now whilst keeping the shape but the sails need to be animated as well now so will have to put a few more back in again :wall:

[needse]

unity3d boat game environment

you will be quite far away from the objects Hench the extreme low poly of some of the objects

[Neil_F01]

cool

[needse]

close up

[stealthninja2]

That looks awesome

[3DsBeginner]

Looks very nice!

[needse]

cv90/40 work in progress

[needse]

updates 2.5 days so far
i think this thread is dead

[needse]

more update running out of time now so i think it done for now :dance:

[needse]

RG-35 work in progress

[needse]

update

[needse]

wire

[needse]

update

[Neil_F01]

love how minimal that model is.. looks great..

[needse]

heres a pic of the thing

[Neil_F01]

looks cool.. more like a medical unit.. its got height and room for stretchers..

[needse]

update

[needse]

updates people updates :dance:

[Neil_F01]

right quick one.. not sure if its something you've over looked.. or just forgotten about.. but still.. thought i'd ask.. check out the image..

[needse]

yeah it had a mesh smooth on it mate it aint now ,it does not notice in the renders anyway

[Chris.Y]

man, you make me want to model this :p nice work so far!

[Neil_F01]

yeah it had a mesh smooth on it mate it aint now ,it does not notice in the renders anyway

thats cool.. it did look a little out of place.. lol... :D

[needse]

more updates

[Kage]

That looks awesome mate, well done! :D

[RoDr1]

Great model, Really nice job!

[stealthninja2]

That is looking beastly

[needse]

link to some animation and modelling i did for Chelsea football club museum
copyright Chelsea football club


animation here : http://www.youtube.com/user/needse1#p/u/6/TfnU9ZTSx0M


it has been speed up for show purposes around x5

[needse]

wire stamford bridge
copyright Chelsea football club

[Neil_F01]

damn man your a machine..

[needse]

here a couple of shots from a animation done for work using all these army models ive been doing. composting and motion graphics and other 3d bits where done by figment productions, i was responsible for doing most of the vehicles. enjoy
i will post full animation which is around 5 mins long as soon as i am allowed ;-)
images copyright Figment Productions and BAE Systems.

[needse]

scope don't comment on the square bit on the front i forgot to fix that i will lol

[needse]

edit

[Neil_F01]

nice

[needse]

more

[needse]

graphics card has melted on me cry cry cry!!!

[washka]

That hurt...so you're selling weapons now?

[needse]

i know wask but all good should be back in biz tomorrow new graphics chip banana dance coming:dance:

[needse]

here's something I've been working on for my demo reel ( its just a stage for the model. wip ) i will get back on it at the weekend hopefully if my new card don't melt on me :wall: !!! c&c welcome.

[needse]

paint over

[Neil_F01]

nice dude..

[TekNeek]

lovely thread you've got here.

[pavlo]

i love this thread, really nice models! :lurve:

[needse]

different angle

[needse]

i will be making around 8 of these with different models and different scenario's

[needse]

playing with textures

i just realized i got the wrong grass in these

[needse]

heres another one i am blocking out

[needse]

more renders

[Neil_F01]

love the tank

[needse]

texture ideas

[needse]

messing around with cameras viewport grabs

http://www.youtube.com/user/needse1?feature=mhee#p/u/6/dRc9SKUF7Pc

[needse]

scene update still thinking ?

[needse]

texturing the sand bags

[needse]

update

[Buzzy]

Wow, this tank diorama is looking incredible so far! I am excited to see the tank fully textured. Nice job!

[needse]

more updates

[needse]

slight scene update

[needse]

scene update

[needse]

more

[needse]

close ups

[Neil_F01]

why havent you been given a thumbs up for this thread.. its insane...

[needse]

hah ha yeah that would be nice ;-)

[Neil_F01]

your like a modelling machine..

[Neil_F01]

not fond mate.. dont even know what the hell that is.. its looks like some bass unit.. or something.. i dont know.

[Neil_F01]

the models cool. just didnt know what it was..

[miraclegirl07]

I love the intricacy of the details. Keep working on it. Great job! :-)


www.hollywoodcrashes.com

[needse]

back to unwrapping this lot

[YEAROFTHEOX]

one small crit on the tank pedestal, i think it would make more sense, if it was spent cartridges littering the ground instead of unfired bullets.

[needse]

good call.slipped my mind

[sean_rodrigues]

blood smeared foot prints and smeared hand prints might look good on the street and walls.

I like the modeling. Hey,have you tried using the unwrap in Zbrush? It puts hours of potential unwrapping and turns it into minutes of work.

Keep it up.

Sean

[needse]

i think I've maybe gone a little over the top with the blood already dunno, i might add a bit of leg or some body parts somewhere :evil:

thanks for ya comments guys

[StarFox8]

Wow man, how long have you been doing 3d for? What has been most challenging for you up to this point?

-StarFox8

[needse]

Wow man, how long have you been doing 3d for? What has been most challenging for you up to this point?

-StarFox8

I've been doing 3d for about 5 years on and off and im 100% self taught as well so maybe its taken me longer than it should of i don't know. the hardest thing has been making money out of it, but if you enjoy it like i do then the money doesn't matter to much :haha:
thanks for your comments

[needse]

working on the texture for the tracks (just planar mapping so I've got some stretching on the sides but not got the time

[needse]

update

[needse]

updated track texture

[needse]

tank side panel and wheels ignore the top of tank not done that yet

[needse]

window area

[needse]

laying out the base texture

[needse]

back update

[needse]

mucking around with the lighting

[needse]

close up

[needse]

http://www.youtube.com/user/needse1?feature=mhee#p/u/6/ogvj_VqR1qg

[lebaje]

Stop bull**it around and get back to the reel thing!!!!!!!

:D :D :D

[needse]

i need to blow something up, make a robot ,animation anything lol. pays the bills though so cant gumble

[paulius-st]

modeling looks nice, but where did you find sucha a terrible phone?? it has a body of blackberry and a monitor from old ohilips diga :D . you could hammer nails in the wall with this gadget :D .
and i agrea with lebaje - where did all heavy machinery go??
i would say you need to move to the forest where you didnt have to worie about any bills and when you are hungrey - go hunt some rabbits or squirrels and create all sorts of bad ass models of super uber tanks . as for electricitie - if i am not wrong - 30 hamsters, 2 bears and a big weal can produce some nice amount of power for your pc. be a macho- think about it - all chicks like tarzan and you would be a sci-fi one :D .

[needse]

@ paulius-st and its not a phone its actually a label maker or something but yeah you could defo hammer some nails in with this bad boy i may add some guns to it lol

[Neil_F01]

sweet dude.. that tank kicks 4rse

[juliokansas]

Wow! Must have too much trouble. :)

[MStandar]

ohh. Sweet modelling needse :)

[Neil_F01]

nice progress dude.. keep up the effort..
looks a little tricky...

[Darkitek]

Brutal modeling skills! you've inspired me on tackling on a T90 tank for my portfolio. The product design is just epic, and from what I've experience so far...lost of sleepless nights. Nice work...super nice...

[needse]

@ Darkitek wow thanks buddy. good luck with your T90 and defo keep me posted on your progress. also don't lose to much sleep ;-)

[lebaje]

can you smash the sh*t out of it and get back to the tank lol

the printer look clean, love to see a final render

[needse]

believe it or not i am acutely starting to enjoy doing these printers lol

[lebaje]

is it for buisness purpose or just for fun?

[MStandar]

Looking very clean, and you have a ton of details on this one.
The mesh looks pretty dens, especialy in the button areas. those wires are smoothed right? What kind of smoothong do you use, because it would be nice to see how you tackled those areas when its not smoothed, or if you use turbosmooth you could turn on isoline display. it would then be easier to look at it :)

But modelling wise i have not found anything to critic on yet.

[paulius-st]

these printers do look great when you model them, but you know - printers, phones, arch-viz, bmw's and MB's cars, house hold gadgets and so on.... are soooo borring .here is a picture to ceep this thread awesome level at decent stage here. :) .
but to be more serious - cool modeling you have here. ceep it up and i hope to see some "manly stuff" soon :) .