The New SMC's - 004 - Portable Fun - Page 10

H2O-3DT · 28-08-2007, 10:05 PM

Old_Nick
Thank you very much.

Trimyr · 28-08-2007, 10:19 PM

h2k1 and Silver Bullet, thanks for the comments. I noticed when rendering that the directional pad seemed a little tall. The power switch is a mess, and it shows. As far as the transparent plastic, I had no idea. It's kind of difficult to tell from most pictures, but explains why I couldn't get the material looking quite right. Oh well, another challenge starts soon enough anyway.

Rachel vd M · 29-08-2007, 11:55 AM

finaly

here's my entry,
had a busy week, i made the nintendo ds (edit: Lite)!

i didn't had enought time to complete it,
there are some features missing like:
DS logo at the top
no screwholes and other features at the bottom
the filler cardridge has only the outer part.
missing ds cardridge slot, wristband holes and power plug
also the headphone symbol was nowhere to be found on the net.
also i forgot to engrave mic next to the microphone

apart from that is has all the features,
mostly used (pro)booleans/cutters and some polymodeling.

flitz · 29-08-2007, 12:10 PM

Looks nice rachel

But the d-pad seems to be a little bit to small

ClassicGamer-3DT · 29-08-2007, 12:21 PM

I've been visiting threedy alot in the last couple of days but not commenting on much, been too busy but I really like alot of the entries this week. There's some really nice modelling and rendering going on. I'm really up for a new challenge now, this one seemed to go on for a long time i'm not sure why. Even though I knew it was a fortnightly challenge, it seemed longer.

Anyway, If I get chance I may comment on a few. Bust at the moment though.

Kind Regards

Classic Gamer

Daye · 29-08-2007, 03:41 PM

This seemed to go on forever !

LOL

Rachel vd M · 29-08-2007, 04:52 PM

Quote:

Originally Posted by flitz

Looks nice rachel

But the d-pad seems to be a little bit to small

thanks, i know, i think i estimated the D-pad at 12 mm, it probably is about 15 or 16 mm

Trimyr · 29-08-2007, 04:57 PM

It did seem to go on for quite some time. A lot of that probably had to do with the absence of entries, or even comments, for two days.

What bothered me is that I was so eager for a new challenge this morning. Every once in a while I forget that I moved past the date line. I forgot that I used to have a new challenge to look forward to when I wake up on Thursdays. I kept refreshing the page all morning. At one point I saw that Marty was on. I was pretty disappointed in him later when I saw that he'd logged off without starting a new challenge.

Of course, that disappeared as soon as I remembered that it was still Tuesday night/evening for most people. I don't know how much time I'll have to work on anything this next week, but I hope it generates at least as much interest.

TheBigunK · 29-08-2007, 05:59 PM

My first and last entry is a concept for a new model of SEGA Game Gear...

Banaan · 29-08-2007, 08:03 PM

i didnt have alot of time, but here it is - the gameboy advance sp

didnt have to time to setup a really good render etc

ClassicGamer-3DT · 29-08-2007, 09:32 PM

That Sega Game Gear XT based on the Sega Master System II Joypad is brilliant, I really love that.

Well i'm afraid i've not had chance to do my comments page this time around, so apologies for that, hopefully it'll return for the next SMC.

I'm been busy modelling though.........

I've got to create a Toyota Rav 4 by Tuesday next week, and i'm only about 20% the way through at the moment. It's a really difficult model aswell, luckily I haven't got to animate it or anything, but the client just wants it in a studio style environment. The front bumper has taken me all afternoon to create, which has been till about 10 mins ago nearly 9 hours work solid. it's a good job that the client won't need to see the wireframe and some of my knife cuts and edge loops are horrific. Sometimes I think "Why did I agree to make this vehicle" then I remember that i'm getting a nice amount of money for this by the end of next week, and I carry on.

You may be thinking "Hey CG why don't you purchase a Rav 4 from turbo squid or something?" but that's missing the point isn't it really. They are paying for my modelling experience, not for me to use a pre-made mesh and wait a few days and collect the money lol. Besides it's a heck on a vehicle to model and is challenging me to new levels of modelling.

Anyway I digress.

Bring On SMC 005!

Kind Regards

Classic Gamer

Daye · 29-08-2007, 11:35 PM

Quote:

Originally Posted by ClassicGamer

That Sega Game Gear XT based on the Sega Master System II Joypad is brilliant, I really love that.

Well i'm afraid i've not had chance to do my comments page this time around, so apologies for that, hopefully it'll return for the next SMC.

I'm been busy modelling though.........

I've got to create a Toyota Rav 4 by Tuesday next week, and i'm only about 20% the way through at the moment. It's a really difficult model aswell, luckily I haven't got to animate it or anything, but the client just wants it in a studio style environment. The front bumper has taken me all afternoon to create, which has been till about 10 mins ago nearly 9 hours work solid. it's a good job that the client won't need to see the wireframe and some of my knife cuts and edge loops are horrific. Sometimes I think "Why did I agree to make this vehicle" then I remember that i'm getting a nice amount of money for this by the end of next week, and I carry on.

You may be thinking "Hey CG why don't you purchase a Rav 4 from turbo squid or something?" but that's missing the point isn't it really. They are paying for my modelling experience, not for me to use a pre-made mesh and wait a few days and collect the money lol. Besides it's a heck on a vehicle to model and is challenging me to new levels of modelling.

Anyway I digress.

Bring On SMC 005!

Kind Regards

Classic Gamer

Well, at least you're making money off of your modeling skills

My day job
is IT and it's boring as hell. . . . . in and out of Cisco switches / routers and
when I'm not doing that, I'm in Unix writing scripts to automate my job so
I have more time to play. . . ( read that model in Rhino / XSI

)

Marty_McFly-3DT · 30-08-2007, 12:00 AM

This challenge is now over...

Marty_McFly-3DT · 07-10-2007, 11:53 PM

Honorable Mentions

ClassicGamer

MrX

Mosmuis

Lukanus

Daye

DarkBoost

h2k1

Rachel vd M

TheBigunK

Runner Ups

H2O

JAPO

Mosmuis

H2O

Winners

Trimyr

DarkBoost

The winners can get in contact with ben@3dtotal.com and supply their contact details which CD they would like and which weeks challenge they were winners of we'll get your prizes out as quickly as possible. Be sure to post a link to this page to Ben to show what challenge you've won!

ClassicGamer-3DT · 08-10-2007, 09:44 AM

Well done to Trimyr and DarkBoost for winning.

Kind Regards

Classic Gamer

28-08-2007, 10:19 PM	#137
Trimyr the anti-hero Join Date: Feb 2004 Location: Guam Posts: 219 Thanks: 0 Thanked 0 Times in 0 Posts	h2k1 and Silver Bullet, thanks for the comments. I noticed when rendering that the directional pad seemed a little tall. The power switch is a mess, and it shows. As far as the transparent plastic, I had no idea. It's kind of difficult to tell from most pictures, but explains why I couldn't get the material looking quite right. Oh well, another challenge starts soon enough anyway. __________________ I intend to live forever. So far, so good. Threedy Speed Modeling Winners Cookware, Fishing Reel Video Game System Part 1, & Part 2 Defend Yourself, Portable Fun, Power Tools

29-08-2007, 11:55 AM	#138
Rachel vd M Rachèl van der Meer Join Date: May 2007 Location: Utrecht Posts: 710 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 16	finaly here's my entry, had a busy week, i made the nintendo ds (edit: Lite)! i didn't had enought time to complete it, there are some features missing like: DS logo at the top no screwholes and other features at the bottom the filler cardridge has only the outer part. missing ds cardridge slot, wristband holes and power plug also the headphone symbol was nowhere to be found on the net. also i forgot to engrave mic next to the microphone apart from that is has all the features, mostly used (pro)booleans/cutters and some polymodeling. Attached Images __________________ winners: Please Say Cheese We Have All The Time In The World 2nds: The Good, The Bad & The Ugly Are you feeling alright? Afraid of the dark 3rds: Pirates Hideouts plants drinks portable fun projectors lamps oh no, not youtube!? Last edited by Rachel vd M; 29-08-2007 at 10:03 PM.. Reason: adding lite

29-08-2007, 12:21 PM	#140
ClassicGamer-3DT Reliable Moderator Join Date: Mar 2006 Location: East Midlands, UK Posts: 7,480 Thanks: 501 Thanked 379 Times in 344 Posts Awards Showcase Total Awards: 9	I've been visiting threedy alot in the last couple of days but not commenting on much, been too busy but I really like alot of the entries this week. There's some really nice modelling and rendering going on. I'm really up for a new challenge now, this one seemed to go on for a long time i'm not sure why. Even though I knew it was a fortnightly challenge, it seemed longer. Anyway, If I get chance I may comment on a few. Bust at the moment though. Kind Regards Classic Gamer __________________ iMac\|Lion OSX\|Cinema 4D R12\|Photoshop CS4\| My New Portfolio My Blog (Now with Free Models) Twitter

29-08-2007, 03:41 PM	#141
Daye aka Nehumanuscrede Join Date: Nov 2004 Location: 29.460N -95.051W Posts: 241 Thanks: 0 Thanked 3 Times in 2 Posts Awards Showcase Total Awards: 4	Agree with CG This seemed to go on forever ! LOL __________________ The insane do not question their sanity . . .

29-08-2007, 04:57 PM	#143
Trimyr the anti-hero Join Date: Feb 2004 Location: Guam Posts: 219 Thanks: 0 Thanked 0 Times in 0 Posts	It did seem to go on for quite some time. A lot of that probably had to do with the absence of entries, or even comments, for two days. What bothered me is that I was so eager for a new challenge this morning. Every once in a while I forget that I moved past the date line. I forgot that I used to have a new challenge to look forward to when I wake up on Thursdays. I kept refreshing the page all morning. At one point I saw that Marty was on. I was pretty disappointed in him later when I saw that he'd logged off without starting a new challenge. Of course, that disappeared as soon as I remembered that it was still Tuesday night/evening for most people. I don't know how much time I'll have to work on anything this next week, but I hope it generates at least as much interest. __________________ I intend to live forever. So far, so good. Threedy Speed Modeling Winners Cookware, Fishing Reel Video Game System Part 1, & Part 2 Defend Yourself, Portable Fun, Power Tools

28-08-2007, 10:05 PM	#136
H2O-3DT Moderator Join Date: Jul 2004 Location: Norway Posts: 953 Thanks: 5 Thanked 9 Times in 8 Posts Awards Showcase Total Awards: 1	Old_Nick Thank you very much.

29-08-2007, 12:10 PM	#139
flitz Registered User Join Date: Mar 2007 Posts: 35 Thanks: 0 Thanked 0 Times in 0 Posts	Looks nice rachel But the d-pad seems to be a little bit to small

29-08-2007, 05:59 PM	#144
TheBigunK The return! Join Date: Jul 2007 Posts: 13 Thanks: 0 Thanked 0 Times in 0 Posts	My first and last entry is a concept for a new model of SEGA Game Gear... Attached Images

29-08-2007, 08:03 PM	#145
Banaan Registered User Join Date: Jun 2007 Location: netherlands, groningen Posts: 130 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 1	i didnt have alot of time, but here it is - the gameboy advance sp didnt have to time to setup a really good render etc Attached Images Last edited by Banaan; 29-08-2007 at 08:05 PM..

29-08-2007, 09:32 PM	#146
ClassicGamer-3DT Reliable Moderator Join Date: Mar 2006 Location: East Midlands, UK Posts: 7,480 Thanks: 501 Thanked 379 Times in 344 Posts Awards Showcase Total Awards: 9	That Sega Game Gear XT based on the Sega Master System II Joypad is brilliant, I really love that. Well i'm afraid i've not had chance to do my comments page this time around, so apologies for that, hopefully it'll return for the next SMC. I'm been busy modelling though......... I've got to create a Toyota Rav 4 by Tuesday next week, and i'm only about 20% the way through at the moment. It's a really difficult model aswell, luckily I haven't got to animate it or anything, but the client just wants it in a studio style environment. The front bumper has taken me all afternoon to create, which has been till about 10 mins ago nearly 9 hours work solid. it's a good job that the client won't need to see the wireframe and some of my knife cuts and edge loops are horrific. Sometimes I think "Why did I agree to make this vehicle" then I remember that i'm getting a nice amount of money for this by the end of next week, and I carry on. You may be thinking "Hey CG why don't you purchase a Rav 4 from turbo squid or something?" but that's missing the point isn't it really. They are paying for my modelling experience, not for me to use a pre-made mesh and wait a few days and collect the money lol. Besides it's a heck on a vehicle to model and is challenging me to new levels of modelling. Anyway I digress. Bring On SMC 005! Kind Regards Classic Gamer __________________ iMac\|Lion OSX\|Cinema 4D R12\|Photoshop CS4\| My New Portfolio My Blog (Now with Free Models) Twitter

30-08-2007, 12:00 AM	#148
Marty_McFly-3DT THE Mad Moderator Join Date: Jul 2004 Location: Why? Are you stalking me? Posts: 2,722 Thanks: 0 Thanked 7 Times in 4 Posts Awards Showcase Total Awards: 1	This challenge is now over... __________________ Born in hearts... and etched in cold... the swingsets pay... the playground's toll... If you can't read this... then my plan is working! Now stop reading this and go model something! Soon the world of 3D will belong to me! Follow me on Twitter @McFlyGold

07-10-2007, 11:53 PM	#149
Marty_McFly-3DT THE Mad Moderator Join Date: Jul 2004 Location: Why? Are you stalking me? Posts: 2,722 Thanks: 0 Thanked 7 Times in 4 Posts Awards Showcase Total Awards: 1	Results! Honorable Mentions ClassicGamer MrX Mosmuis Lukanus Daye DarkBoost h2k1 Rachel vd M TheBigunK Runner Ups H2O JAPO Mosmuis H2O Winners Trimyr DarkBoost The winners can get in contact with ben@3dtotal.com and supply their contact details which CD they would like and which weeks challenge they were winners of we'll get your prizes out as quickly as possible. Be sure to post a link to this page to Ben to show what challenge you've won!

08-10-2007, 09:44 AM	#150
ClassicGamer-3DT Reliable Moderator Join Date: Mar 2006 Location: East Midlands, UK Posts: 7,480 Thanks: 501 Thanked 379 Times in 344 Posts Awards Showcase Total Awards: 9	Well done to Trimyr and DarkBoost for winning. Kind Regards Classic Gamer __________________ iMac\|Lion OSX\|Cinema 4D R12\|Photoshop CS4\| My New Portfolio My Blog (Now with Free Models) Twitter

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode