Black Five Steam Locomotive

hammer88 · 27-01-2012, 11:00 AM

Well here I am starting a new steam locomotive, but this time I'll won't do box modeling but rather subdivision modeling. This is my first serious attempt at subdivision modeling so all c&c is welcomed.

needse · 27-01-2012, 11:05 AM

good start although there looks like alot of polys there.

hammer88 · 27-01-2012, 11:29 AM

Yes, there are a lot of polys but that is because of a turbo-smooth modifier set with 2 levels of mesh smooth

hammer88 · 27-01-2012, 02:20 PM

Progress shot:

needse · 27-01-2012, 02:57 PM

yeah sorry i was looking at it on a phone so it looked like a trillion polys sorry dude

hammer88 · 30-01-2012, 04:19 PM

More progress:

And the lead truck:

needse · 30-01-2012, 04:30 PM

in my opinion you need to sharpen up some them edges it looks a Little soft

looking good though

hammer88 · 01-02-2012, 04:32 PM

Thanks, if you are talking about the edges on the wheel spokes they are prototypical...

Some more progress:

A close-up:

And the wireframe...

omegaend · 02-02-2012, 07:20 AM

this one looks my toy that been damage over 5 years

hammer88 · 03-02-2012, 02:35 PM

More done... It's actually starting to look like a locomotive

omegaend · 03-02-2012, 05:09 PM

good between good

hammer88 · 08-02-2012, 07:56 PM

Some more progress....

And a wire frame....

hammer88 · 10-02-2012, 02:01 PM

I've found out that subD is quite enjoyable...
More progress...

needse · 10-02-2012, 02:10 PM

looking good

hamidaliabadi · 10-02-2012, 04:01 PM

its wonderful.many many detail.i like your work.

27-01-2012, 11:00 AM	#1
hammer88 3D Artisan Join Date: May 2007 Posts: 110 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 1	Black Five Steam Locomotive Well here I am starting a new steam locomotive, but this time I'll won't do box modeling but rather subdivision modeling. This is my first serious attempt at subdivision modeling so all c&c is welcomed. Attached Images __________________ --- 3D Artisan --- "the pursuit of perfection" Me on Twitter HERE Big Boy steam engine WIP Last edited by hammer88; 02-03-2012 at 11:49 AM..

27-01-2012, 11:29 AM	#3
hammer88 3D Artisan Join Date: May 2007 Posts: 110 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 1	Yes, there are a lot of polys but that is because of a turbo-smooth modifier set with 2 levels of mesh smooth __________________ --- 3D Artisan --- "the pursuit of perfection" Me on Twitter HERE Big Boy steam engine WIP

27-01-2012, 02:20 PM	#4
hammer88 3D Artisan Join Date: May 2007 Posts: 110 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 1	Progress shot: __________________ --- 3D Artisan --- "the pursuit of perfection" Me on Twitter HERE Big Boy steam engine WIP

30-01-2012, 04:19 PM	#6
hammer88 3D Artisan Join Date: May 2007 Posts: 110 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 1	More progress: And the lead truck: __________________ --- 3D Artisan --- "the pursuit of perfection" Me on Twitter HERE Big Boy steam engine WIP

01-02-2012, 04:32 PM	#8
hammer88 3D Artisan Join Date: May 2007 Posts: 110 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 1	Thanks, if you are talking about the edges on the wheel spokes they are prototypical... Some more progress: A close-up: And the wireframe... __________________ --- 3D Artisan --- "the pursuit of perfection" Me on Twitter HERE Big Boy steam engine WIP

27-01-2012, 11:05 AM	#2
needse Available for Freelance Join Date: Nov 2010 Location: essex uk Posts: 2,670 Thanks: 680 Thanked 265 Times in 238 Posts Awards Showcase Total Awards: 4	good start although there looks like alot of polys there.

27-01-2012, 02:57 PM	#5
needse Available for Freelance Join Date: Nov 2010 Location: essex uk Posts: 2,670 Thanks: 680 Thanked 265 Times in 238 Posts Awards Showcase Total Awards: 4	yeah sorry i was looking at it on a phone so it looked like a trillion polys sorry dude

30-01-2012, 04:30 PM	#7
needse Available for Freelance Join Date: Nov 2010 Location: essex uk Posts: 2,670 Thanks: 680 Thanked 265 Times in 238 Posts Awards Showcase Total Awards: 4	in my opinion you need to sharpen up some them edges it looks a Little soft looking good though

02-02-2012, 07:20 AM	#9
omegaend Banned. Join Date: Sep 2010 Posts: 222 Thanks: 0 Thanked 0 Times in 0 Posts	this one looks my toy that been damage over 5 years

03-02-2012, 02:35 PM	#10
hammer88 3D Artisan Join Date: May 2007 Posts: 110 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 1	More done... It's actually starting to look like a locomotive __________________ --- 3D Artisan --- "the pursuit of perfection" Me on Twitter HERE Big Boy steam engine WIP

03-02-2012, 05:09 PM	#11
omegaend Banned. Join Date: Sep 2010 Posts: 222 Thanks: 0 Thanked 0 Times in 0 Posts	good between good

08-02-2012, 07:56 PM	#12
hammer88 3D Artisan Join Date: May 2007 Posts: 110 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 1	Some more progress.... And a wire frame.... __________________ --- 3D Artisan --- "the pursuit of perfection" Me on Twitter HERE Big Boy steam engine WIP

10-02-2012, 02:01 PM	#13
hammer88 3D Artisan Join Date: May 2007 Posts: 110 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 1	I've found out that subD is quite enjoyable... More progress... __________________ --- 3D Artisan --- "the pursuit of perfection" Me on Twitter HERE Big Boy steam engine WIP

10-02-2012, 02:10 PM	#14
needse Available for Freelance Join Date: Nov 2010 Location: essex uk Posts: 2,670 Thanks: 680 Thanked 265 Times in 238 Posts Awards Showcase Total Awards: 4	looking good

10-02-2012, 04:01 PM	#15
hamidaliabadi Registered User Join Date: Jan 2012 Location: iran Posts: 36 Thanks: 9 Thanked 0 Times in 0 Posts	its wonderful.many many detail.i like your work.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode