Woman sub-d modell

nick74 · 09-08-2004, 12:03 AM

Im trying to modell a woman in maya 6 using sub-d modelling
im glad about any suggestions or critic.

Sorry about the bad enlish by the way

/Niklas

PhantomOokami · 09-08-2004, 12:08 AM

her legs and her arms are kinda blocky. You might wanna fix that =/

anonuser · 09-08-2004, 05:52 AM

make sure you keep her center aligned. turn on gridsnaping (X) and select all the CV's and drag them to the center.

For any poly modeling i suggest you get MJ PolyTools

1.3 is the version i use it adds lifesaving features, like looping and edging and connect features (standard in max).

Set up better lighting. Change your renderer to mental ray. Set up an omni light set the intensity to about half or little lower. then go turn on final gather. turn the photons down to about 400 - 500, so it won't kill your rendering.

good luck.

Eternal10k · 10-08-2004, 01:47 AM

legs look a little bit flat...

nick74 · 15-08-2004, 02:37 PM

just a smal update.
Does MJpoly tools 1.3 work for maya 6?

huxtiblejones · 15-08-2004, 06:16 PM

Only strange things I notice are the hands. The palms jut out instead of the knuckles. Other than that, I have to say you're doing a very good job.

nick74 · 17-08-2004, 03:05 AM

Im stuck on the face cant seem to get it right

Downup · 17-08-2004, 06:08 PM

the torso and face is realy good!

Some Tweaks on the arms,hand,legs,feets and it will be super

WebWolf · 17-08-2004, 10:36 PM

I think, the head is to flat on the top and the back of the skull is to high. I drew a few lines to show you what I mean.
Also, the neck is to thin and the yaw should flow smoother into the neck.
The frontview: The face looks a bit flat, maybe you should emphasize the bones below the eyes (don't know how to say in English), make them sharper.
The lips don't look right either, they should flow into the face. They look as if they are glued on top of the face.

The shin is to short and the arms look a little to maskulin.

anonuser · 18-08-2004, 05:02 AM

Yes it does. Works wonders in fact.

nick74 · 21-08-2004, 11:03 PM

Just a few tweaks plus made the mouth open.

Thanks for the pointers

09-08-2004, 12:03 AM	#1
nick74 Registered User Join Date: Aug 2003 Location: sweden Posts: 30 Thanks: 0 Thanked 0 Times in 0 Posts	Woman sub-d modell Im trying to modell a woman in maya 6 using sub-d modelling im glad about any suggestions or critic. Sorry about the bad enlish by the way /Niklas

09-08-2004, 05:52 AM	#3
anonuser Registered User Join Date: Mar 2003 Location: Atlanta, Ga Posts: 98 Thanks: 0 Thanked 0 Times in 0 Posts	make sure you keep her center aligned. turn on gridsnaping (X) and select all the CV's and drag them to the center. For any poly modeling i suggest you get MJ PolyTools 1.3 is the version i use it adds lifesaving features, like looping and edging and connect features (standard in max). Set up better lighting. Change your renderer to mental ray. Set up an omni light set the intensity to about half or little lower. then go turn on final gather. turn the photons down to about 400 - 500, so it won't kill your rendering. good luck. __________________ Some day our golden sun will rise.

10-08-2004, 01:47 AM	#4
Eternal10k Registered User Join Date: Oct 2003 Location: Honduras Posts: 149 Thanks: 0 Thanked 0 Times in 0 Posts	legs look a little bit flat... __________________ The Flame Burns Forever!!! "Through me the way into the suffering city, Through me the way to the eternal pain, Through me the way that runs among the lost. Justice urged on my high artificer; My maker was divine authority, The highest wisdom, and the primal love. Before me nothing but eternal things were made, And I endure eternally. Abandon every hope, ye who enter here."

15-08-2004, 02:37 PM	#5
nick74 Registered User Join Date: Aug 2003 Location: sweden Posts: 30 Thanks: 0 Thanked 0 Times in 0 Posts	Smal update just a smal update. Does MJpoly tools 1.3 work for maya 6?

17-08-2004, 03:05 AM	#7
nick74 Registered User Join Date: Aug 2003 Location: sweden Posts: 30 Thanks: 0 Thanked 0 Times in 0 Posts	stuck on the face Im stuck on the face cant seem to get it right

09-08-2004, 12:08 AM	#2
PhantomOokami Registered User Join Date: Aug 2004 Posts: 595 Thanks: 0 Thanked 0 Times in 0 Posts	her legs and her arms are kinda blocky. You might wanna fix that =/

15-08-2004, 06:16 PM	#6
huxtiblejones Registered User Join Date: Aug 2004 Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	Only strange things I notice are the hands. The palms jut out instead of the knuckles. Other than that, I have to say you're doing a very good job.

17-08-2004, 06:08 PM	#8
Downup 3D Studio Max 7.0 Join Date: Oct 2002 Location: In a box Posts: 2,112 Thanks: 0 Thanked 0 Times in 0 Posts	the torso and face is realy good! Some Tweaks on the arms,hand,legs,feets and it will be super __________________ 40% Stupid + 60% BrainDead = 100% Downup Some undone work http://downup.inc.se/

17-08-2004, 10:36 PM	#9
WebWolf Speed Modeler Join Date: Jul 2004 Location: Ludwigsburg, Germany Posts: 189 Thanks: 0 Thanked 0 Times in 0 Posts	I think, the head is to flat on the top and the back of the skull is to high. I drew a few lines to show you what I mean. Also, the neck is to thin and the yaw should flow smoother into the neck. The frontview: The face looks a bit flat, maybe you should emphasize the bones below the eyes (don't know how to say in English), make them sharper. The lips don't look right either, they should flow into the face. They look as if they are glued on top of the face. The shin is to short and the arms look a little to maskulin.

18-08-2004, 05:02 AM	#10
anonuser Registered User Join Date: Mar 2003 Location: Atlanta, Ga Posts: 98 Thanks: 0 Thanked 0 Times in 0 Posts	Yes it does. Works wonders in fact. __________________ Some day our golden sun will rise.

21-08-2004, 11:03 PM	#11
nick74 Registered User Join Date: Aug 2003 Location: sweden Posts: 30 Thanks: 0 Thanked 0 Times in 0 Posts	Just a few tweaks plus made the mouth open. Thanks for the pointers

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode