speed modelling challenge week 16 - fridge

[Andy_k-3DT]

speed modelling challenge week 16


The "rules" are simple,

1, Each week we'll post a subject for you to model along with a time limit on how long you should spend on it. How you interpret the brief is up to you as long as the final model conforms to what we have asked for.

2, spend no longer than the specified time on the modelling stages then render the image.

3, Post the image here along with your details, software used, time spent etc. Please post only one image per entry with a maximum file size of 100k and with the maximum dimensions of 800x600. This image should include at least one wire frame view of your finished model. Posts with multiple renders of the same object will be deleted.

4, time spent on rendering or texturing is not included in the alocated period to allow those with slower machines to participate on an even playing field. What we are looking for is the quality of the models you can produce "under pressure"

5, if your model is not complete, you can still post as long as it's recognizeable

6, no cheating, we are relying on your honesty here and the idea of speed modelling is to simulate a "real world" environment. If you are working on a project and asked to show a concept model you'll need to be able to get somewhere near the target in the allocated time. Your submission should be a model created especially for this challenge and not one you have stored on your hard drive.

7, No limit to the number of entries each person is allowed as long as each one is a completely new model and not one that utilises bits of previous entries


8, No external links to pictures, they must be attached using the browse button and be no larger than 800x600 pixels and 100k. Any pictures larger than this or links will be removed as soon as we see them and the poster will be disqualified immediately

prizes of a 3D Total texture CDs to the best entrants. We'll judge it to avoid the voting process getting too complicated and winners will be notified by email.

so, here we go, with this week's challenge

deadline - 22.00 GMT Wednesday 6th October 2004

modelling time - 60 minutes

subject "fridge/refrigerator/cooler"

your inspiration can come from anywhere, the huge kelvinators from the 1950s to ultra modern designs

I'll add my contribution later in the week, but the time is based on a 50 minute model I have done today for a client (which for the time being is covered by an NDA )

Andy

[3dluka]

Im Also In .. lats try for the second time speedmoddeling

[Andy_k-3DT]

The model I am going to post will be the one my client doesn't want - sadly I just haven't had the time to do any "fun" modelling today so you'll just have to wait - let's see who is the first to get one posted - Orkron or the Bully?

Andy

[Silent Voice]

Originally posted by 3dluka
Im Also In .. lats try for the second time speedmoddeling

But i am out cuz its bed time . I better be in tomorrow hopefully.

Keep up the good work.

[the_bully]

Originally posted by Andy_k-3DT
let's see who is the first to get one posted - Orkron or the Bully?

Andy

Thanks alot Andy for putting me on the spot

i dont think i can get to one tonight but ill try
sometime later im sure orkron will beat me to it

[mike437]

First one!
Modeled, textured, and rendered all in 34 minutes.
Just modeling took 19 minutes.
I'll make a better one later if I have time.

[Sonic-X]

A FRIDGE - I'M SURE I HAVE ONE OR TWO OF THOSE LYING AROUND AT HOME. 60min PLENTY TIME.

[oad]

My first attempt for this weeks competition
3D Max 6
Modelling 45 minutes
texturing 10 minutes
rendertime <1 minute

C&C welcome

[Aware]

Most of all the wireframes I see are no use what-so-ever. Cant you guys put Wire Mode on in a Viewport, maximize it and take a screendump please? And dont have Mesh-Smooth on when you do it. The Raw Wires are a lot better.

[Chokin Hazard™]

Modeling time : 30 mins
Texturing : 20 Mins
Rendering : 3 Mins

PS : r3D(a member here) came up with the word "Diet Chokeâ„¢"

Laters....

[oad]

This Can of Coke was found in the alps.
It is dated 15th century...

3D Max 6
modelling 50 minutes
Texturing 5 minutes
rendering 12 minutes

and again... C&C welcome

[smallpiece]

'Diet Choke',,, nice touch chokin hazard...
I should get some time to have a go a bit later, hopefully.

[anima3d]

Coooool !!!

[lostdude]

Hi Everyone... Here's my take on the subject.... A wine cooler with an amphora shaped handle!!:P
Made in 3ds max 6 in 30 mins.
Coms n Crits welcome...

[UnsteadyTeddy]

Originally posted by Andy_k-3DT

6, no cheating, we are relying on your honesty here and the idea of speed modelling is to simulate a "real world" environment. If you are working on a project and asked to show a concept model you'll need to be able to get somewhere near the target in the allocated time. Your submission should be a model created especially for this challenge and not one you have stored on your hard drive.

hrhr andy :>