EdgeLoop Tools, Spin Faces scripts available for Max6?

kelgor · 08-12-2004, 06:16 AM

I bought the Freedom-of-Teach DVD on box modeling a human. They use Maya, and i'm using Max 6. They also use a couple of scripts that I am not able to find for max. One involving Edge Loops, the other is Spin faces. Do the equivilent of these exist for max6?

It looks absolutely critical to use those 2 scripts.

Any help would be greatly appreciated.
-Pete

DeadlyFreeze · 08-12-2004, 07:25 AM

Edgeloops are easy enough, just get into your edge sub-object and use the connect tool along with ring and loop selection.

..cant say what spin face relates to in max though, if you describe it I'm sure max has something similar.

kelgor · 08-12-2004, 09:42 AM

Well, in the DVD; he selected 2 polys next to eachother and then hit his script button (Spin Faces) and it rotated the edge in the middle and welded the verts at both ends of the rotated edge to the verts of the edge it aligned to. basically saved about 3 steps. Edge remove, 3d Snap, Cut poly.

By da way, thank you sir for responding.

08-12-2004, 06:16 AM	#1
kelgor Registered User Join Date: Sep 2004 Location: Boise, ID Posts: 75 Thanks: 0 Thanked 0 Times in 0 Posts	EdgeLoop Tools, Spin Faces scripts available for Max6? I bought the Freedom-of-Teach DVD on box modeling a human. They use Maya, and i'm using Max 6. They also use a couple of scripts that I am not able to find for max. One involving Edge Loops, the other is Spin faces. Do the equivilent of these exist for max6? It looks absolutely critical to use those 2 scripts. Any help would be greatly appreciated. -Pete

08-12-2004, 07:25 AM	#2
DeadlyFreeze Not a zombie. Join Date: Jan 2004 Location: P-town Posts: 1,547 Thanks: 7 Thanked 32 Times in 20 Posts Awards Showcase Total Awards: 10	Edgeloops are easy enough, just get into your edge sub-object and use the connect tool along with ring and loop selection. ..cant say what spin face relates to in max though, if you describe it I'm sure max has something similar. __________________ DWV Work Thread... so many balls. The mysterious guy behind you...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-12-2004, 09:42 AM	#3
kelgor Registered User Join Date: Sep 2004 Location: Boise, ID Posts: 75 Thanks: 0 Thanked 0 Times in 0 Posts	Well, in the DVD; he selected 2 polys next to eachother and then hit his script button (Spin Faces) and it rotated the edge in the middle and welded the verts at both ends of the rotated edge to the verts of the edge it aligned to. basically saved about 3 steps. Edge remove, 3d Snap, Cut poly. By da way, thank you sir for responding.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)