speed modelling challenge week 33 - lamp

Andy_k-3DT · 03-02-2005, 02:59 AM

The "rules" are simple,

1, Each week we'll post a subject for you to model along with a time limit on how long you should spend on it. How you interpret the brief is up to you as long as the final model conforms to what we have asked for.

2, spend no longer than the specified time on the modelling stages then render the image.

3, Post the image here along with your details, software used, time spent etc. Please post only one image per entry with a maximum file size of 100k and with the maximum dimensions of 800x600. This image should include at least one wire frame view of your finished model. Posts with multiple renders of the same object will be deleted.

4, time spent on rendering or texturing is not included in the alocated period to allow those with slower machines to participate on an even playing field. What we are looking for is the quality of the models you can produce "under pressure"

5, if your model is not complete, you can still post as long as it's recognizeable

6, no cheating, we are relying on your honesty here and the idea of speed modelling is to simulate a "real world" environment. If you are working on a project and asked to show a concept model you'll need to be able to get somewhere near the target in the allocated time. Your submission should be a model created especially for this challenge and not one you have stored on your hard drive.

7, No limit to the number of entries each person is allowed as long as each one is a completely new model and not one that utilises bits of previous entries

8, No external links to pictures, they must be attached using the browse button and be no larger than 800x600 pixels and 100k. Any pictures larger than this or links will be removed as soon as we see them and the poster will be disqualified immediately

prizes of a 3D Total texture CDs to the best entrants. We'll judge it to avoid the voting process getting too complicated and winners will be notified by an announcement in the thread once judging is complete.

so, here we go, with this week's challenge

deadline - 22.00 GMT Wednesday 9th February 2005

modelling time - 60 minutes

subject - lamp

This weeks subject whilst not neccessarily easier is another that can be approached from so many directions and at so many levels we think everyone has a chance.

It doesn't have to be any particular type of lamp it can be a floor mounted standard lamp, an angle poise, desk lamp etc etc etc - your call, make it interesting

good luck and have fun

Andy

Andy_k-3DT · 03-02-2005, 03:01 AM

a real quick one from me this week

modelled in 5 minutes (2 splines)

Cinema 4DR9

Andy

vladoportos · 03-02-2005, 03:02 AM

Yea lamp i love this theme.....

inspired · 03-02-2005, 03:10 AM

awesome subject! i feel an inspired lamp company coming up! This week will contain a couple of entries from me i suppose, Im gonna sketch my ideas out right away

hehe still cant believe ive won

thanks again Andy!

every1 Good luck on this one! lets have another GREAT contest!

DESPISTADO · 03-02-2005, 03:14 AM

wow lamps yumi yumi

i love this subject, btw andy that lamp its not one of your best render

Andy_k-3DT · 03-02-2005, 03:26 AM

Quote:

Originally posted by DESPISTADO
wow lamps yumi yumi i love this subject, btw andy that lamp its not one of your best render

yeah I know - I'm racing to meet a deadline for a client tonight - that one literally took 10 minutes from start to finish (including the radiosity calculations) I'll come back to it and re texture/re render later in the week when I have a little more time

Andy

mr_lemon · 03-02-2005, 03:56 AM

gud one...i'm starting to work now...uh btw...great work inspired and renz for the phone contest

really deserved

Renz · 03-02-2005, 04:01 AM

Hi!
hope this will light the spirit of speeed week lamp challenege. all the best in the hope of good light.

Barks · 03-02-2005, 04:16 AM

I LOVE LAMP!

Anyone who has seen Anchorman will get that.

Awesome subject Andy. The possiblities are ENDLESS!

DESPISTADO · 03-02-2005, 04:48 AM

my first entry

3ds max 7

modeling time: 20 minutes

texture time: 3 minutes

render time: 9 minutes and 33 seconds

Black · 03-02-2005, 05:11 AM

No Lamps that grant three wishes when you rub them yet?!!

Renz · 03-02-2005, 05:21 AM

Quote:

Originally posted by Black
No Lamps that grant three wishes when you rub them yet?!!

Black.. clever thinkn.. whishes . lights .. hope.. it crosses 600 mork this time i bet it will

vladoportos · 03-02-2005, 05:29 AM

Hmm I already finnished my luxo lamp (pixar style) now just do a render somehow

mr_lemon · 03-02-2005, 05:47 AM

this contest is starting pretty good...that's my starter,done in rhyno and max.For the body 30 min + 5 min for cables and 6 min for the lathed spline that lies on a box(5 sec...

).C&C are welcome

n-e-gma · 03-02-2005, 06:09 AM

Hi guys!!
You all made lots of cool helmets

Who was the winner?

Lets get it on....
Humm a lamp

Lets see what i can do...

Andy, everything worked ok?

03-02-2005, 02:59 AM	#1
Andy_k-3DT 3d monkey Join Date: Sep 2002 Location: UK Posts: 1,611 Thanks: 0 Thanked 1 Time in 1 Post Awards Showcase Total Awards: 2	speed modelling challenge week 33 - lamp The "rules" are simple, 1, Each week we'll post a subject for you to model along with a time limit on how long you should spend on it. How you interpret the brief is up to you as long as the final model conforms to what we have asked for. 2, spend no longer than the specified time on the modelling stages then render the image. 3, Post the image here along with your details, software used, time spent etc. Please post only one image per entry with a maximum file size of 100k and with the maximum dimensions of 800x600. This image should include at least one wire frame view of your finished model. Posts with multiple renders of the same object will be deleted. 4, time spent on rendering or texturing is not included in the alocated period to allow those with slower machines to participate on an even playing field. What we are looking for is the quality of the models you can produce "under pressure" 5, if your model is not complete, you can still post as long as it's recognizeable 6, no cheating, we are relying on your honesty here and the idea of speed modelling is to simulate a "real world" environment. If you are working on a project and asked to show a concept model you'll need to be able to get somewhere near the target in the allocated time. Your submission should be a model created especially for this challenge and not one you have stored on your hard drive. 7, No limit to the number of entries each person is allowed as long as each one is a completely new model and not one that utilises bits of previous entries 8, No external links to pictures, they must be attached using the browse button and be no larger than 800x600 pixels and 100k. Any pictures larger than this or links will be removed as soon as we see them and the poster will be disqualified immediately prizes of a 3D Total texture CDs to the best entrants. We'll judge it to avoid the voting process getting too complicated and winners will be notified by an announcement in the thread once judging is complete. so, here we go, with this week's challenge deadline - 22.00 GMT Wednesday 9th February 2005 modelling time - 60 minutes subject - lamp This weeks subject whilst not neccessarily easier is another that can be approached from so many directions and at so many levels we think everyone has a chance. It doesn't have to be any particular type of lamp it can be a floor mounted standard lamp, an angle poise, desk lamp etc etc etc - your call, make it interesting good luck and have fun Andy

03-02-2005, 03:02 AM	#3
vladoportos Modo user Join Date: Jul 2004 Location: Japan --> for now.. Posts: 525 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 33	Yea lamp i love this theme..... __________________ working on space marine now :/ ---> HERE <---

03-02-2005, 03:10 AM	#4
inspired Back after 6 years Join Date: Sep 2004 Location: The Hague, Netherlands Posts: 1,550 Thanks: 0 Thanked 0 Times in 0 Posts	awesome subject! i feel an inspired lamp company coming up! This week will contain a couple of entries from me i suppose, Im gonna sketch my ideas out right away hehe still cant believe ive won thanks again Andy! every1 Good luck on this one! lets have another GREAT contest! __________________ - Be Inspired - projects: - 1.) PROJECT M: Practising Lighting and Texturing Speed Modeling Contests: honorable mentions: Week 20 / Week 29 / Week 32 / Week 33 / Week 34 / Week 38 / Week 39 / Week 41 Runner Ups: None yet, i don't like running up... Wins: Week 29 / Week 30 / Week 37

03-02-2005, 03:14 AM	#5
DESPISTADO WIREFRAME Join Date: Aug 2003 Location: EL SALVADOR Posts: 416 Thanks: 0 Thanked 0 Times in 0 Posts	wow lamps yumi yumi i love this subject, btw andy that lamp its not one of your best render __________________ FANTASY ITS THE REALITY OF THE DREAMS

03-02-2005, 03:56 AM	#7
mr_lemon Continue?...9..8..7.. Join Date: Sep 2004 Location: Italy - Milano Posts: 584 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 1	gud one...i'm starting to work now...uh btw...great work inspired and renz for the phone contest really deserved __________________ NO TRESPASSING - violators will be shoot survivors will be shoot again ----- Some of my previous post to speed modelling challenge ----- Finally the final : http://forums.3dtotal.com/showthread.php?t=56459 My Gallery: http://positivedope.deviantart.com/gallery/

03-02-2005, 03:01 AM	#2
Andy_k-3DT 3d monkey Join Date: Sep 2002 Location: UK Posts: 1,611 Thanks: 0 Thanked 1 Time in 1 Post Awards Showcase Total Awards: 2	a real quick one from me this week modelled in 5 minutes (2 splines) Cinema 4DR9 Andy

03-02-2005, 04:01 AM	#8
Renz Registered User Join Date: Oct 2004 Posts: 118 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 1	For the green spirit of EARTH lamp Hi! hope this will light the spirit of speeed week lamp challenege. all the best in the hope of good light.

03-02-2005, 04:16 AM	#9
Barks Embrace the Evil Join Date: Dec 2002 Location: Canada - British Columbia Posts: 231 Thanks: 1 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 2	I LOVE LAMP! Anyone who has seen Anchorman will get that. Awesome subject Andy. The possiblities are ENDLESS! __________________ Insanity is merely a point of view that opposes your own.

03-02-2005, 04:48 AM	#10
DESPISTADO WIREFRAME Join Date: Aug 2003 Location: EL SALVADOR Posts: 416 Thanks: 0 Thanked 0 Times in 0 Posts	my first entry 3ds max 7 modeling time: 20 minutes texture time: 3 minutes render time: 9 minutes and 33 seconds __________________ FANTASY ITS THE REALITY OF THE DREAMS

03-02-2005, 05:11 AM	#11
Black Unpopular Join Date: Oct 2004 Posts: 1,579 Thanks: 0 Thanked 0 Times in 0 Posts	No Lamps that grant three wishes when you rub them yet?!! __________________ "I refuse to allow a disability to determine how I live my life. I don't mean to be reckless, but setting a goal that seems a bit daunting actually is very helpful toward recovery,... " Christopher Reeve 25 September 1952-10 October 2004

03-02-2005, 05:29 AM	#13
vladoportos Modo user Join Date: Jul 2004 Location: Japan --> for now.. Posts: 525 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 33	Hmm I already finnished my luxo lamp (pixar style) now just do a render somehow __________________ working on space marine now :/ ---> HERE <---

03-02-2005, 05:47 AM	#14
mr_lemon Continue?...9..8..7.. Join Date: Sep 2004 Location: Italy - Milano Posts: 584 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 1	this contest is starting pretty good...that's my starter,done in rhyno and max.For the body 30 min + 5 min for cables and 6 min for the lathed spline that lies on a box(5 sec... ).C&C are welcome __________________ NO TRESPASSING - violators will be shoot survivors will be shoot again ----- Some of my previous post to speed modelling challenge ----- Finally the final : http://forums.3dtotal.com/showthread.php?t=56459 My Gallery: http://positivedope.deviantart.com/gallery/

03-02-2005, 06:09 AM	#15
n-e-gma Registered User Join Date: Jan 2005 Posts: 51 Thanks: 0 Thanked 0 Times in 0 Posts	Hi guys!! You all made lots of cool helmets Who was the winner? Lets get it on.... Humm a lamp Lets see what i can do... Andy, everything worked ok?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode