Help about 3dtotal cds

SquerPans · 19-03-2005, 08:11 AM

hi all
i bought 3dtotal cd v9 and i dont know how to use the textures
mayby its a selly qustion but plz tell me how ?
there is now setup there or somthing soo how i use tis textures for my 3d mx

Tom-3DT · 30-03-2005, 03:49 PM

Hi There,

You apply the textures the same as you apply any textures in max by loading them into the material library.

I think it sounds to me like you need some beginner max tutorials to get you started, we have provided many free ones here and some include use of material library

www.3dtotal.com/tutorials

Crondar · 22-04-2005, 12:40 AM

I have been looking through the tutorials and having actually come across how to add new materials to the library either, perhaps you could point out one that does, or simply tell us?

andoy · 22-04-2005, 01:09 PM

Firstly open a new folder somewhere and save all the textures to it.
open up max then hit "M", to open the material editor.
hit the blue circle tab to get material and the material browser will open,select material library, the top right button ( a white sheet with blue circle in it) will clear the material lbrary so you can start a new one.
Go back to the material editor and under the "maps" parameters select diffuse colour, hit the empty grey tab at the right side of it and you can then browse to the folder where you put your bitmaps, select a bitmap of your choice.
then hit the go to parent button and do the same for the bump slot under maps only this time select the corresponding Bump map that matches the bitmap you put in the diffuse slot.
go to parent again, you should now be able to save this material to a library by using the put to library button.
Do this for all the textures and you will then have a nice library for the cd, but don't forget to save the library as a matlib file in max.

Tom-3DT · 22-04-2005, 02:43 PM

Thanks you Andoy that's a great post. If anyone else is struggling then please let me know and we will make a small tutorial when we get chance.

Tom

flameche · 30-04-2005, 02:54 AM

Hello, just a question. Can I use the textures ( on the CDs textures ), in Carrara, it is an other 3D soft ( it's not 3Dmax ).

( Sorry for my bad english because I am French )

?? the textures in the CDs are simply pictures or not ??

Tom-3DT · 30-04-2005, 03:03 PM

Yes they work in all 3D software and yes they are basically just pictures, a colour, bump and spec picture that combine together to make a seamless texture.

Tom

flameche · 30-04-2005, 07:09 PM

how many times must I wait for have the CDs when I pay it ?

Daniel · 01-05-2005, 07:39 AM

When I purchased a few 3dtotal cd's a while back, being in canada it took about a week. Doubt it would take much more than that for you as well, unless you live in an igloo somewhere

flameche · 01-05-2005, 05:51 PM

And if I live in France, how many times approximately ?

Tom-3DT · 03-05-2005, 06:19 PM

All orders are dispatched from 3Dtotal within 48 hours
Shipping outside the UK is via 'Royal Mail Airmail'. Their delivery aims are listed as :-
Europe - 3 working days
Worldwide - Dependent on country - Average 7 working days (USA average 6 working days)

19-03-2005, 08:11 AM	#1
SquerPans Registered User Join Date: Mar 2005 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Help about 3dtotal cds hi all i bought 3dtotal cd v9 and i dont know how to use the textures mayby its a selly qustion but plz tell me how ? there is now setup there or somthing soo how i use tis textures for my 3d mx

22-04-2005, 01:09 PM	#4
andoy Registered User Join Date: Aug 2004 Location: Dubai, UAE Posts: 1,080 Thanks: 0 Thanked 0 Times in 0 Posts	Firstly open a new folder somewhere and save all the textures to it. open up max then hit "M", to open the material editor. hit the blue circle tab to get material and the material browser will open,select material library, the top right button ( a white sheet with blue circle in it) will clear the material lbrary so you can start a new one. Go back to the material editor and under the "maps" parameters select diffuse colour, hit the empty grey tab at the right side of it and you can then browse to the folder where you put your bitmaps, select a bitmap of your choice. then hit the go to parent button and do the same for the bump slot under maps only this time select the corresponding Bump map that matches the bitmap you put in the diffuse slot. go to parent again, you should now be able to save this material to a library by using the put to library button. Do this for all the textures and you will then have a nice library for the cd, but don't forget to save the library as a matlib file in max. __________________ "We make a living with what we get, but, we make a life with what we give.." Winston Churchill. CG Portfolio: http://andoy.cgsociety.org

01-05-2005, 07:39 AM	#9
Daniel Registered User Join Date: May 2003 Location: Montreal Posts: 2,153 Thanks: 0 Thanked 0 Times in 0 Posts	When I purchased a few 3dtotal cd's a while back, being in canada it took about a week. Doubt it would take much more than that for you as well, unless you live in an igloo somewhere __________________ "There are no binding oaths between men and lions- wolves and lambs can enjoy no meeting of the minds- they are all bent on hating each other to the death." -Achilles "It is better by noble boldness to run the risk of being subject to half the evils we anticipate than to remain in cowardly listlessness for fear of what might happen." -Herodotus

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

30-03-2005, 03:49 PM	#2
Tom-3DT aka 'nosewalker' Join Date: Sep 2002 Location: Worcester, UK Posts: 2,925 Thanks: 274 Thanked 56 Times in 32 Posts Awards Showcase Total Awards: 5	Hi There, You apply the textures the same as you apply any textures in max by loading them into the material library. I think it sounds to me like you need some beginner max tutorials to get you started, we have provided many free ones here and some include use of material library www.3dtotal.com/tutorials

22-04-2005, 12:40 AM	#3
Crondar Registered User Join Date: Apr 2005 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	I have been looking through the tutorials and having actually come across how to add new materials to the library either, perhaps you could point out one that does, or simply tell us?

22-04-2005, 02:43 PM	#5
Tom-3DT aka 'nosewalker' Join Date: Sep 2002 Location: Worcester, UK Posts: 2,925 Thanks: 274 Thanked 56 Times in 32 Posts Awards Showcase Total Awards: 5	Thanks you Andoy that's a great post. If anyone else is struggling then please let me know and we will make a small tutorial when we get chance. Tom

30-04-2005, 02:54 AM	#6
flameche Registered User Join Date: Apr 2005 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Hello, just a question. Can I use the textures ( on the CDs textures ), in Carrara, it is an other 3D soft ( it's not 3Dmax ). ( Sorry for my bad english because I am French ) ?? the textures in the CDs are simply pictures or not ??

30-04-2005, 03:03 PM	#7
Tom-3DT aka 'nosewalker' Join Date: Sep 2002 Location: Worcester, UK Posts: 2,925 Thanks: 274 Thanked 56 Times in 32 Posts Awards Showcase Total Awards: 5	Yes they work in all 3D software and yes they are basically just pictures, a colour, bump and spec picture that combine together to make a seamless texture. Tom

30-04-2005, 07:09 PM	#8
flameche Registered User Join Date: Apr 2005 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	how many times must I wait for have the CDs when I pay it ?

01-05-2005, 05:51 PM	#10
flameche Registered User Join Date: Apr 2005 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	And if I live in France, how many times approximately ?

03-05-2005, 06:19 PM	#11
Tom-3DT aka 'nosewalker' Join Date: Sep 2002 Location: Worcester, UK Posts: 2,925 Thanks: 274 Thanked 56 Times in 32 Posts Awards Showcase Total Awards: 5	All orders are dispatched from 3Dtotal within 48 hours Shipping outside the UK is via 'Royal Mail Airmail'. Their delivery aims are listed as :- Europe - 3 working days Worldwide - Dependent on country - Average 7 working days (USA average 6 working days)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)