Speed Modelling Challenge 82 - Microscope

Marty_McFly-3DT · 19-01-2006, 01:48 AM

The rules are simple

1, Each week we'll post a subject for you to model along with a time limit on how long you should spend on it. Spend no longer than the allocated time then post a render of your model. No cheating, we are relying on your honesty here and the idea of speed modelling is to simulate a "real world" environment. If you are working on a project and asked to show a concept model you'll need to be able to get somewhere near the target in the allocated time. Your submission should be a model created especially for this challenge and not one you have stored on your hard drive.

How you interpret the brief is up to you as long as the final model conforms to what we have asked for. Any images of models that do not match the brief will be removed and the poster disqualified

2, You may enter as many times as you like as long as each model is completely new and uses no components from other entries. Entries using models which are not original will be removed and the poster disqualified

3, Your entry may contain as many views of your model as you like but it must include a clear and easy to see wire frame of the mesh before any smoothing/subdivision has been applied. Please use a screen grab. No other method is acceptable and any "wire renders" or wireframes we can't see properly will be removed and the poster disqualified

4, You must include the following details with each submission: software used and time spent creating the model. Any further information is voluntary but posts not containg the required information will be removed and the poster disqualified.

5, Post only one image submission per entry which must be no larger than 800x600 pixels in either landscape or portrait format with a file size of no more than 100k. These images must be uploaded to our servers using the "browse" button on the forum reply page. Do not link to external images Files. larger than the maximum size or posts containing links to external images (other than for reference materials) will be removed and the poster disqualified

6, time spent on rendering or texturing or building a scene in which to display your model is not included in the alocated period to allow those with slower machines to participate on an even playing field. What we are looking for is the quality of the models you can produce "under pressure". If your model is not complete, you can still post as long as it's recognizeable.

These rules apply to everybody taking part there will be NO exceptions

Time limit - 60 minutes
Deadline - 22.00 G.M.T. Wednesday 25th of January 2006
Subject - Microscope

No special notes this week, as this subject shouldn't really need any.

Have Fun and Good Luck!

Marty, Fastrak, Andy and Black

hammering3D · 19-01-2006, 01:51 AM

nice one

, hope I will join U in this one

.
good luck ppl.

see U,

gan3d · 19-01-2006, 01:53 AM

subject is cool. am surely in for this one. All the best ppl.

alidanesh · 19-01-2006, 02:08 AM

he he..nice one ..i like it ..i ll come to this week

......and nice one Marty..U presented Fastrak Inc work...

Marty_McFly-3DT · 19-01-2006, 02:19 AM

Quote:

Originally Posted by alidanesh

he he..nice one ..i like it ..i ll come to this week

......and nice one Marty..U presented Fastrak Inc work...

Now you should know by now that had I modelled it... it would be in the most powerful of colors... Periwinkle Blue!

Marty_McFly-3DT · 19-01-2006, 02:37 AM

You wanted it, you've got it. For 1 week only there is a thread made just for you to post challenge ideas! You can find it here: Suggest A Challenge
So what are you waiting for?!?! Get to posting!

evolution · 19-01-2006, 06:31 AM

Great topic this week im in for sure, anyways i thought this might spur some inspiration. Theres tons of microscopes here: http://www.olympus-europa.com/medical/22.htm

--BUG-- · 19-01-2006, 05:37 PM

Can i create a new dsign for my miscroscope?

Nehumanuscrede · 19-01-2006, 06:04 PM

Very cool. . . .

I have one of these on ( you guessed it ) my desk

Stereo Microscope I use to look at really small stuff when I get bored lol.

Will definitely have to submit an entry this week. Will give me something to do tomorrow since I'm off work

** edit **

http://www.microscope-store.com/

This is the site I purchased my scope from. Lots of images there to use as
reference.

** end edit **

Marty_McFly-3DT · 19-01-2006, 06:59 PM

Quote:

Originally Posted by --BUG--

Can i create a new dsign for my miscroscope?

I don't know... can you?

GRA*FX · 19-01-2006, 07:23 PM

Glad to see you.

My design of the electronic microscope.

Possible such already exist.
But I while their did not see in sale.
The idea was born immediately, when saws coffee on kitchen.
Has taken the paper and pencil, has done the sketch.
Afterwards peacefully all carry on computer.

Now possible go to sleep.
Shall tomorrow do new work, idea already there is.
Good luck all.

Modeling in 3D Max7 - 45 min
Texturing:-35 min
Rendering:20 min(Brazil)

sematic · 19-01-2006, 09:28 PM

Here's my first entry this week, based on the John Yarwell desidned microscope from around the 1680s.

Here is my reference picture:
http://micro.magnet.fsu.edu/primer/m...arwell1680.jpg

alidanesh · 19-01-2006, 10:37 PM

Hi agian Every one ...good early works By GRA*Fx:Nice design and stylish and Sematic: nice Texture,i like it...
and here is my microscope...

sotware: 3dsmax 8.0
Modeling: full 60 min
Texturing/Lighting:2 h
Rendeing:6min by MentalRay
Hope U like it..and i'll back ...

Orkron · 19-01-2006, 10:55 PM

Max 6
40 minutes
vray rendered

artecnl · 19-01-2006, 10:56 PM

very nice alidanesh, grafx i like a lot too,

im finishing my entry, it was a lot of time since i post my last model here

wow orkron, thats very interesting, very nice

19-01-2006, 01:48 AM	#1
Marty_McFly-3DT THE Mad Moderator Join Date: Jul 2004 Location: Why? Are you stalking me? Posts: 2,722 Thanks: 0 Thanked 7 Times in 4 Posts Awards Showcase Total Awards: 1	Speed Modelling Challenge 82 - Microscope The rules are simple 1, Each week we'll post a subject for you to model along with a time limit on how long you should spend on it. Spend no longer than the allocated time then post a render of your model. No cheating, we are relying on your honesty here and the idea of speed modelling is to simulate a "real world" environment. If you are working on a project and asked to show a concept model you'll need to be able to get somewhere near the target in the allocated time. Your submission should be a model created especially for this challenge and not one you have stored on your hard drive. How you interpret the brief is up to you as long as the final model conforms to what we have asked for. Any images of models that do not match the brief will be removed and the poster disqualified 2, You may enter as many times as you like as long as each model is completely new and uses no components from other entries. Entries using models which are not original will be removed and the poster disqualified 3, Your entry may contain as many views of your model as you like but it must include a clear and easy to see wire frame of the mesh before any smoothing/subdivision has been applied. Please use a screen grab. No other method is acceptable and any "wire renders" or wireframes we can't see properly will be removed and the poster disqualified 4, You must include the following details with each submission: software used and time spent creating the model. Any further information is voluntary but posts not containg the required information will be removed and the poster disqualified. 5, Post only one image submission per entry which must be no larger than 800x600 pixels in either landscape or portrait format with a file size of no more than 100k. These images must be uploaded to our servers using the "browse" button on the forum reply page. Do not link to external images Files. larger than the maximum size or posts containing links to external images (other than for reference materials) will be removed and the poster disqualified 6, time spent on rendering or texturing or building a scene in which to display your model is not included in the alocated period to allow those with slower machines to participate on an even playing field. What we are looking for is the quality of the models you can produce "under pressure". If your model is not complete, you can still post as long as it's recognizeable. These rules apply to everybody taking part there will be NO exceptions Time limit - 60 minutes Deadline - 22.00 G.M.T. Wednesday 25th of January 2006 Subject - Microscope No special notes this week, as this subject shouldn't really need any. Have Fun and Good Luck! Marty, Fastrak, Andy and Black

19-01-2006, 01:51 AM	#2
hammering3D I belong to nobody ... Join Date: Feb 2005 Location: On Thready forums (or on Romania) Posts: 1,429 Thanks: 0 Thanked 1 Time in 1 Post Awards Showcase Total Awards: 4	nice one , hope I will join U in this one . good luck ppl. see U, __________________ The WIP of joy Cartoon Room Phineas and Ferb cartoons Training Ground Speed Modelling - The Coming of the Ice Unified Challenge

19-01-2006, 02:08 AM	#4
alidanesh Registered User Join Date: Aug 2005 Posts: 174 Thanks: 0 Thanked 0 Times in 0 Posts	he he..nice one ..i like it ..i ll come to this week......and nice one Marty..U presented Fastrak Inc work...

19-01-2006, 02:37 AM	#6
Marty_McFly-3DT THE Mad Moderator Join Date: Jul 2004 Location: Why? Are you stalking me? Posts: 2,722 Thanks: 0 Thanked 7 Times in 4 Posts Awards Showcase Total Awards: 1	Important Notice!!! You wanted it, you've got it. For 1 week only there is a thread made just for you to post challenge ideas! You can find it here: Suggest A Challenge So what are you waiting for?!?! Get to posting! __________________ Born in hearts... and etched in cold... the swingsets pay... the playground's toll... If you can't read this... then my plan is working! Now stop reading this and go model something! Soon the world of 3D will belong to me! Follow me on Twitter @McFlyGold

19-01-2006, 06:04 PM	#9
Nehumanuscrede Rhino user Join Date: May 2005 Location: Just south of Houston, TX Posts: 159 Thanks: 0 Thanked 0 Times in 0 Posts	Nice :) Very cool. . . . I have one of these on ( you guessed it ) my desk Stereo Microscope I use to look at really small stuff when I get bored lol. Will definitely have to submit an entry this week. Will give me something to do tomorrow since I'm off work edit http://www.microscope-store.com/ This is the site I purchased my scope from. Lots of images there to use as reference. end edit __________________ It is pitch black. You are likely to be eaten by a grue. Last edited by Nehumanuscrede; 19-01-2006 at 07:01 PM.. Reason: added hyper-link

19-01-2006, 01:53 AM	#3
gan3d Registered User Join Date: Jan 2005 Location: Bangalore,INDIA Posts: 170 Thanks: 0 Thanked 0 Times in 0 Posts	subject is cool. am surely in for this one. All the best ppl.

19-01-2006, 06:31 AM	#7
evolution Registered User Join Date: Nov 2004 Location: Oregon Posts: 224 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 4	Great topic this week im in for sure, anyways i thought this might spur some inspiration. Theres tons of microscopes here: http://www.olympus-europa.com/medical/22.htm

19-01-2006, 05:37 PM	#8
--BUG-- Remodelling The Universe Join Date: Jan 2006 Location: Brazil, São Paulo, Santos. Posts: 45 Thanks: 0 Thanked 0 Times in 0 Posts	Can i create a new dsign for my miscroscope?

19-01-2006, 07:23 PM	#11
GRA*FX VODKA-the best beer!!! Join Date: Jun 2005 Location: Russia - NORILSK Posts: 63 Thanks: 0 Thanked 0 Times in 0 Posts	Glad to see you. My design of the electronic microscope. Possible such already exist. But I while their did not see in sale. The idea was born immediately, when saws coffee on kitchen. Has taken the paper and pencil, has done the sketch. Afterwards peacefully all carry on computer. Now possible go to sleep. Shall tomorrow do new work, idea already there is. Good luck all. Modeling in 3D Max7 - 45 min Texturing:-35 min Rendering:20 min(Brazil) __________________ Muss das wirklich sein? Sagt nein! Nein! Sind wir hier ganz allein? Sagt nein! Nein! Kriegen sie uns klein? Sagt nein! Nein! Bin ich hier ganz allein? Sagt nein! Nein! Nein!... grafx2@yandex.ru

19-01-2006, 09:28 PM	#12
sematic Registered User Join Date: Sep 2005 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	Here's my first entry this week, based on the John Yarwell desidned microscope from around the 1680s. Here is my reference picture: http://micro.magnet.fsu.edu/primer/m...arwell1680.jpg

19-01-2006, 10:37 PM	#13
alidanesh Registered User Join Date: Aug 2005 Posts: 174 Thanks: 0 Thanked 0 Times in 0 Posts	Hi agian Every one ...good early works By *GRAFx:Nice design and stylish and Sematic**: nice Texture,i like it... and here is my microscope... sotware: 3dsmax 8.0 Modeling: full 60 min Texturing/Lighting:2 h Rendeing:6min by MentalRay Hope U like it..and i'll back ...

19-01-2006, 10:55 PM	#14
Orkron Modelrater! Join Date: Jun 2004 Location: Trapped in a Cube Posts: 2,387 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 3	Max 6 40 minutes vray rendered __________________ Download hdri maps at Orkron.com Follow me on Twitter @Orkron

19-01-2006, 10:56 PM	#15
artecnl IZayado Join Date: Aug 2005 Location: Monterrey, Mexico Posts: 653 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 7	very nice alidanesh, grafx i like a lot too, im finishing my entry, it was a lot of time since i post my last model here wow orkron, thats very interesting, very nice __________________ my new portfolio ¡

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode