Max Cutting

tradedaemon · 25-03-2003, 07:55 PM

In max and I'm in Meshsmooth and cutting, my wires get all twisted and I was wondering why this happens. I was looking on ScriptSpot and they have somethigng for that but its for Max 5 and I only have MAx 4. Any Help Please

kuman · 25-03-2003, 09:28 PM

i don't really understand your questions that clearly. can you explain more? you're in meshsmooth and cutting? you found a script that does what you want, what's the script called and what does it do?

i think the more specfic and in depth you can be about a question the easier it is for others to give you some ideas.

-k

Jyncus · 26-03-2003, 03:16 AM

Err..if you're trying to cut edges after you have the meshsmooth modifier applied, it gets extremely messy and complicated - depending on your iterations of course.
Make sure you're clicking the little lightbulb thing to the left of Meshsmooth in the stack to toggle it "on" and "off" as needed while you do you're cutting.

-Hope that's what you're talking about..

25-03-2003, 07:55 PM	#1
tradedaemon Registered User Join Date: Mar 2003 Posts: 73 Thanks: 0 Thanked 0 Times in 0 Posts	Max Cutting In max and I'm in Meshsmooth and cutting, my wires get all twisted and I was wondering why this happens. I was looking on ScriptSpot and they have somethigng for that but its for Max 5 and I only have MAx 4. Any Help Please __________________ Reality is Gone

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

25-03-2003, 09:28 PM	#2
kuman Fishscale Join Date: Oct 2002 Location: Venice Beach Posts: 831 Thanks: 0 Thanked 0 Times in 0 Posts	i don't really understand your questions that clearly. can you explain more? you're in meshsmooth and cutting? you found a script that does what you want, what's the script called and what does it do? i think the more specfic and in depth you can be about a question the easier it is for others to give you some ideas. -k

26-03-2003, 03:16 AM	#3
Jyncus mmm..beans. Join Date: Mar 2003 Location: Georgia Posts: 339 Thanks: 0 Thanked 0 Times in 0 Posts	Err..if you're trying to cut edges after you have the meshsmooth modifier applied, it gets extremely messy and complicated - depending on your iterations of course. Make sure you're clicking the little lightbulb thing to the left of Meshsmooth in the stack to toggle it "on" and "off" as needed while you do you're cutting. -Hope that's what you're talking about..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)