Delay in recalling Material Editor!

Ghori · 12-04-2003, 04:43 PM

There is delay of about 10 seconds or more whenever I call the material editor.... I used a P4 with an nVidia Geforce4 ti4600.

I know this does not happen with my other PIII based machine...

How can i solve this?
please help

jbw · 13-04-2003, 12:16 PM

Try turning Nview off.

ta,
jbw

kuman · 13-04-2003, 10:45 PM

well are you using some very complex material trees. i get a lot of slowdown when i have a whole bunch of slots filled with complex material trees. i mean this is probably some sort of setting/hardware problem but i thought i'd mention that heavy material trees will lead to a natural slowdown.

-k

Ghori · 15-04-2003, 07:42 PM

It was definitely the nview drivers... I updated my drivers and it seems to have fixed my problem... or the delay is not noticeable.

Thanks...

& Kuman... I had an unrelated question...

could you please tell me why I can't dock any new toolbar to the tab Panel in Max5 like I could in an earlier version... it's annoying....

Ghori

kuman · 15-04-2003, 09:21 PM

i don't know ghori
sorry i can't help you with that one really
i don't use the toolbar at all (i'm too old school man)

instead what i do is stick tools that i use a lot into my quads and i use custom quads

perhaps someone else will post with a suitable answer...

good luck man
-k

12-04-2003, 04:43 PM	#1
Ghori Registered User Join Date: Apr 2003 Location: Dubai Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts	Delay in recalling Material Editor! There is delay of about 10 seconds or more whenever I call the material editor.... I used a P4 with an nVidia Geforce4 ti4600. I know this does not happen with my other PIII based machine... How can i solve this? please help __________________ www.ghoridesign.com

15-04-2003, 07:42 PM	#4
Ghori Registered User Join Date: Apr 2003 Location: Dubai Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts	It was definitely the nview drivers... I updated my drivers and it seems to have fixed my problem... or the delay is not noticeable. Thanks... & Kuman... I had an unrelated question... could you please tell me why I can't dock any new toolbar to the tab Panel in Max5 like I could in an earlier version... it's annoying.... Ghori __________________ www.ghoridesign.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

13-04-2003, 12:16 PM	#2
jbw Fozzy Bear is your friend Join Date: Oct 2002 Location: UK Posts: 248 Thanks: 0 Thanked 0 Times in 0 Posts	Try turning Nview off. ta, jbw

13-04-2003, 10:45 PM	#3
kuman Fishscale Join Date: Oct 2002 Location: Venice Beach Posts: 831 Thanks: 0 Thanked 0 Times in 0 Posts	well are you using some very complex material trees. i get a lot of slowdown when i have a whole bunch of slots filled with complex material trees. i mean this is probably some sort of setting/hardware problem but i thought i'd mention that heavy material trees will lead to a natural slowdown. -k

15-04-2003, 09:21 PM	#5
kuman Fishscale Join Date: Oct 2002 Location: Venice Beach Posts: 831 Thanks: 0 Thanked 0 Times in 0 Posts	i don't know ghori sorry i can't help you with that one really i don't use the toolbar at all (i'm too old school man) instead what i do is stick tools that i use a lot into my quads and i use custom quads perhaps someone else will post with a suitable answer... good luck man -k

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)