THE Sculpting Challenge 010: Voting

Lynette-3dt · 02-11-2008, 01:15 PM

Hello Everyone,

Thanks for supporting the Speed Sculpting Challenges!

Time limit: 4 hours
Start Date: 21st October, 18:00 GMT+0
Deadline: 31st October, 11:59 PM GMT+0
Subject: Sculpt your own Jack-o'-Lantern!

The 010th sculpting challenge final entries are all in, so it's now time to decide on our 10th winner! This job rests on you guys - the participants and spectators! Here's all you have to do:

1. Check out the Speed Sculpt Challenge - 010 - Final Submissions thread
2. Find your top 3 favourite entries and rank them from first to third, remembering that points will be given as folllows: 1st: 3 points, 2nd: 2 points & 3rd: 1 point.
3. Only the rank and names are required, and we prefer the thread to be kept clean of chatter and such, although please feel free to give reasons as to why you have chosen each of your top 3, and perhaps make some honourary mentions if you wish you could have voted for more!

Voting Rules and Restrictions:

- In order for your vote to be valid, your post count must be 50 or above. The only exception to this rule is if you have contributed an entry yourself to the 010 challenge.
- If you want to vote but are not a contributor of this 010 challenge, you need to have been registered on the Threedy Forums for at least the last six months, as well as have 50 posts already to your name.
- It goes without saying that all voters must look through each of the entries before posting their score, and only entries from the final submissions thread are valid.
- Don't vote for yourself!

Deadline for all votes: Friday 7th November 10:AM GMT+0

There is just one week to vote! We will add up all the points and announce the winner on Friday 7th November after 10:00 AM GMT (or earlier if the 3DT team see it fit to end the voting sooner, i.e. if there have been no votes for over 24 hours).

Happy voting!

Longhi · 02-11-2008, 01:34 PM

1 - slangford
2 - 3dhorus
3 - mrp3d

Good luck guys!

ryvick · 02-11-2008, 01:59 PM

1 - Slangford
2 - Mrp3d
3 - Kipiripi

Darchand · 02-11-2008, 02:33 PM

Great entries every one and a brilliant idea for the sculpting challenge.

1 - ryvick
2 - slangford
3 - capitan_popo

Good Luck Guys

*Edit by Lynette-3dt*: Sorry, I can't accept this vote as Darchand has not been a registered user for 6 months. I'm very sorry! Please do vote next month though, Darchand, as you will be valid to vote at that time. Thanks for your support and apologies on this occasion.

M3N7H0L5 · 02-11-2008, 04:05 PM

1-mrp3d
2-slangford
3-silvaticus

capitan_popo · 02-11-2008, 05:13 PM

here are my votes:
1 silvaticus
2 slangford
3 edgemaster

Sathe · 02-11-2008, 05:45 PM

slangford
ryvick
M3N7H0L5

Sweet work dudes,
M3N7H0L5, i love how nerdy yours is lol...

DELTATHUND3R · 02-11-2008, 07:29 PM

Well done to all entrys.
1=eiadahnim
2=edgemaster
3=longhi

MadComputerUser · 02-11-2008, 07:29 PM

1: dPunisher
2: M_Cederstorm
3: 3DHorus

Nice work everyone

mrpeculiar · 02-11-2008, 09:33 PM

1 .slangford
2 .longhi
3 .eiadahnim

Nice work on this one guys

Good luck

M_Cederstrom · 03-11-2008, 01:33 AM

wow, let me start off by saying crazy work guy's and gal's. so here is my picks.

1. dpunisher - nice over all, love the pulled skin.
2. slangford - love the style.
3. ryvick - I can't get over the night before christmas fell.

good lucK every one.

Siah · 03-11-2008, 11:03 AM

Nice work ladies and gents. My votes,

1# - Silvaticus! -Looks great. Love the forms and the carved look you got. Well done!

2# - Eiadahnim - The teeth and facial expression plus detail is awesome.

3# - Longhi - Great idea! Quite the goofy look

Old_Nick · 03-11-2008, 11:57 AM

1. julieN
2. eiadahnim
3. ryvick

Good luck!

dPunisher · 04-11-2008, 08:21 AM

1. slangford
2. MRP3D
3. silvaticus

U guys are really good!

ale3dfx · 04-11-2008, 04:51 PM

1. longhi
2. eiadahnim
3. edgemaster

Good luck!!

*Edit by Lynette-3dt*: Sorry, I can't accept this vote as ale3dfx hasn't reach the minimum of 50 posts to count as a valid voter just yet. Sorry!

02-11-2008, 01:15 PM	#1
Lynette-3dt 3DTotal Content Manager Join Date: Dec 2006 Location: Worcester, UK Posts: 1,760 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 3	THE Sculpting Challenge 010: Voting Hello Everyone, Thanks for supporting the Speed Sculpting Challenges! Time limit: 4 hours Start Date: 21st October, 18:00 GMT+0 Deadline: 31st October, 11:59 PM GMT+0 Subject: Sculpt your own Jack-o'-Lantern! The 010th sculpting challenge final entries are all in, so it's now time to decide on our 10th winner! This job rests on you guys - the participants and spectators! Here's all you have to do: 1. Check out the Speed Sculpt Challenge - 010 - Final Submissions thread 2. Find your top 3 favourite entries and rank them from first to third, remembering that points will be given as folllows: 1st: 3 points, 2nd: 2 points & 3rd: 1 point. 3. Only the rank and names are required, and we prefer the thread to be kept clean of chatter and such, although please feel free to give reasons as to why you have chosen each of your top 3, and perhaps make some honourary mentions if you wish you could have voted for more! Voting Rules and Restrictions: - In order for your vote to be valid, your post count must be 50 or above. The only exception to this rule is if you have contributed an entry yourself to the 010 challenge. - If you want to vote but are not a contributor of this 010 challenge, you need to have been registered on the Threedy Forums for at least the last six months, as well as have 50 posts already to your name. - It goes without saying that all voters must look through each of the entries before posting their score, and only entries from the final submissions thread are valid. - Don't vote for yourself! Deadline for all votes: Friday 7th November 10:AM GMT+0 There is just one week to vote! We will add up all the points and announce the winner on Friday 7th November after 10:00 AM GMT (or earlier if the 3DT team see it fit to end the voting sooner, i.e. if there have been no votes for over 24 hours). Happy voting!

02-11-2008, 01:34 PM	#2
Longhi Registered User Join Date: Jul 2008 Location: Sao Paulo/Brazil Posts: 163 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 4	1 - slangford 2 - 3dhorus 3 - mrp3d Good luck guys! __________________ _____________________ Glauco Longhi Freelancer Sculptor www.glaucolonghi.com http://www.facebook.com/longhiglauco

02-11-2008, 01:59 PM	#3
ryvick Lucid Dreamer Join Date: Oct 2003 Location: Canada Posts: 709 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 4	1 - Slangford 2 - Mrp3d 3 - Kipiripi __________________ DWIV My Portfolio GA Gallery DWIII Old Website

02-11-2008, 02:33 PM	#4
Darchand Registered User Join Date: Jul 2008 Posts: 334 Thanks: 1 Thanked 2 Times in 2 Posts Awards Showcase Total Awards: 4	Great entries every one and a brilliant idea for the sculpting challenge. 1 - ryvick 2 - slangford 3 - capitan_popo Good Luck Guys Edit by Lynette-3dt: Sorry, I can't accept this vote as Darchand has not been a registered user for 6 months. I'm very sorry! Please do vote next month though, Darchand, as you will be valid to vote at that time. Thanks for your support and apologies on this occasion. Last edited by Lynette-3dt; 07-11-2008 at 10:44 AM..

02-11-2008, 04:05 PM	#5
M3N7H0L5 eatin' ain't cheatin' Join Date: May 2008 Location: Kuala Lumpur,Malaysia Posts: 149 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 1	1-mrp3d 2-slangford 3-silvaticus __________________ triple double-u double dot com ...

02-11-2008, 05:13 PM	#6
capitan_popo 3d junkie Join Date: Apr 2006 Location: Guatemala Posts: 664 Thanks: 28 Thanked 12 Times in 10 Posts Awards Showcase Total Awards: 1	here are my votes: 1 silvaticus 2 slangford 3 edgemaster __________________ =====>MY BLOG<========= =====>MY WEBSITE<=========

02-11-2008, 05:45 PM	#7
Sathe Hardstyle Join Date: Feb 2004 Posts: 3,367 Thanks: 97 Thanked 44 Times in 38 Posts Awards Showcase Total Awards: 6	slangford ryvick M3N7H0L5 Sweet work dudes, M3N7H0L5, i love how nerdy yours is lol... __________________ ______________________________ Hard Surface Essentials http://vimeo.com/10941211 Threedy 4 life

02-11-2008, 07:29 PM	#8
DELTATHUND3R Registered User Join Date: May 2008 Posts: 255 Thanks: 0 Thanked 0 Times in 0 Posts	Well done to all entrys. 1=eiadahnim 2=edgemaster 3=longhi

02-11-2008, 07:29 PM	#9
MadComputerUser Call me Keeghan Join Date: Oct 2008 Location: New Zealand Posts: 127 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 1	1: dPunisher 2: M_Cederstorm 3: 3DHorus Nice work everyone __________________ "Shoe lace tying is hard, why do you think jesus wore sandals?" Deadly Poison Studios

02-11-2008, 09:33 PM	#10
mrpeculiar Registered User Join Date: Jun 2007 Posts: 161 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 7	1 .slangford 2 .longhi 3 .eiadahnim Nice work on this one guys Good luck

03-11-2008, 01:33 AM	#11
M_Cederstrom Right Here Join Date: May 2005 Location: Dallas, Texas Posts: 2,984 Thanks: 0 Thanked 4 Times in 4 Posts Awards Showcase Total Awards: 7	wow, let me start off by saying crazy work guy's and gal's. so here is my picks. 1. dpunisher - nice over all, love the pulled skin. 2. slangford - love the style. 3. ryvick - I can't get over the night before christmas fell. good lucK every one. __________________ Study Thread (crite's are super welcome) mostly 2d work...

03-11-2008, 11:03 AM	#12
Siah Registered User Join Date: Aug 2008 Location: Australia Posts: 77 Thanks: 0 Thanked 0 Times in 0 Posts	Nice work ladies and gents. My votes, 1# - Silvaticus! -Looks great. Love the forms and the carved look you got. Well done! 2# - Eiadahnim - The teeth and facial expression plus detail is awesome. 3# - Longhi - Great idea! Quite the goofy look

03-11-2008, 11:57 AM	#13
Old_Nick From the inside Join Date: Oct 2002 Location: Metropolis Posts: 709 Thanks: 0 Thanked 0 Times in 0 Posts	1. julieN 2. eiadahnim 3. ryvick Good luck! __________________ 3d works: Sony Ericsson T630

04-11-2008, 08:21 AM	#14
dPunisher Registered User Join Date: Oct 2008 Posts: 55 Thanks: 0 Thanked 0 Times in 0 Posts	1. slangford 2. MRP3D 3. silvaticus U guys are really good!

04-11-2008, 04:51 PM	#15
ale3dfx Alessandro M. Ribeiro Join Date: Jun 2008 Location: Araçatuba-SP Brazil Posts: 24 Thanks: 0 Thanked 0 Times in 0 Posts	1. longhi 2. eiadahnim 3. edgemaster Good luck!! Edit by Lynette-3dt: Sorry, I can't accept this vote as ale3dfx hasn't reach the minimum of 50 posts to count as a valid voter just yet. Sorry! Last edited by Lynette-3dt; 07-11-2008 at 10:57 AM..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode