need help breaking through paper or water

fabmedia · 15-05-2003, 04:55 PM

I have a project that I need to do. It's a still image but I need to show a vehicle bursting out of either paper or water or something. I don't know how exactly to do this but hopefully someone can point me in the right direction.

Thanks
Arlen

Goig! · 15-05-2003, 08:41 PM

You don´t have to look too far, right here in the 3D Total tutorials section there´s a very complete one.

Cutting & Cracking tutorial

fabmedia · 15-05-2003, 09:06 PM

The tutorial doesn't cover what it is I need. It talks about cutting, not punching through an object. I thought i saw a tutorial or a discussion about a car that is "peeled" during a drive through the city. I can't seem to find it. Any ideas?

Arlen

Goig! · 15-05-2003, 09:12 PM

But I think that you could apply the same principles...

fabmedia · 15-05-2003, 09:19 PM

yes I think your right. I'm going to try it tonight. This is a project for my site. There's a new one coming out soon. I just have to get my crap together...

thanks!
A

beleg · 15-05-2003, 09:23 PM

Here's the one on the car peeling away:

http://www.3dtotal.com/team/Tutorial...ta/advert1.asp
It's also under Project Overiew in the tutorials section, the Toyota Matrix

fabmedia · 15-05-2003, 09:50 PM

Now I know this is repetative because you've presented the URL, but where did you find it?

A

beleg · 16-05-2003, 02:31 AM

Go to http://www.3dtotal.com, go to Free Stuff->Tutorials
Click on the Project Overviews, and it's about the fifth one down.

15-05-2003, 04:55 PM	#1
fabmedia Registered User Join Date: Apr 2003 Location: Vancouver, BC Posts: 64 Thanks: 0 Thanked 0 Times in 0 Posts	need help breaking through paper or water I have a project that I need to do. It's a still image but I need to show a vehicle bursting out of either paper or water or something. I don't know how exactly to do this but hopefully someone can point me in the right direction. Thanks Arlen __________________ Arlen ---------------------------------------------- Fabmedia Studios – Set yourself apart. http://www.fabmedia.com

15-05-2003, 08:41 PM	#2
Goig! Yep, a smiley. SO WHAT!? Join Date: Oct 2002 Location: Bangkok, Thailand Posts: 304 Thanks: 0 Thanked 0 Times in 0 Posts	You don´t have to look too far, right here in the 3D Total tutorials section there´s a very complete one. Cutting & Cracking tutorial __________________ "Art, like morality, consists of drawing the line somewhere."

15-05-2003, 09:06 PM	#3
fabmedia Registered User Join Date: Apr 2003 Location: Vancouver, BC Posts: 64 Thanks: 0 Thanked 0 Times in 0 Posts	The tutorial doesn't cover what it is I need. It talks about cutting, not punching through an object. I thought i saw a tutorial or a discussion about a car that is "peeled" during a drive through the city. I can't seem to find it. Any ideas? Arlen __________________ Arlen ---------------------------------------------- Fabmedia Studios – Set yourself apart. http://www.fabmedia.com

15-05-2003, 09:12 PM	#4
Goig! Yep, a smiley. SO WHAT!? Join Date: Oct 2002 Location: Bangkok, Thailand Posts: 304 Thanks: 0 Thanked 0 Times in 0 Posts	But I think that you could apply the same principles... __________________ "Art, like morality, consists of drawing the line somewhere."

15-05-2003, 09:19 PM	#5
fabmedia Registered User Join Date: Apr 2003 Location: Vancouver, BC Posts: 64 Thanks: 0 Thanked 0 Times in 0 Posts	yes I think your right. I'm going to try it tonight. This is a project for my site. There's a new one coming out soon. I just have to get my crap together... thanks! A __________________ Arlen ---------------------------------------------- Fabmedia Studios – Set yourself apart. http://www.fabmedia.com

15-05-2003, 09:23 PM	#6
beleg Registered User Join Date: Mar 2003 Location: TX Posts: 34 Thanks: 0 Thanked 0 Times in 0 Posts	Here's the one on the car peeling away: http://www.3dtotal.com/team/Tutorial...ta/advert1.asp It's also under Project Overiew in the tutorials section, the Toyota Matrix

15-05-2003, 09:50 PM	#7
fabmedia Registered User Join Date: Apr 2003 Location: Vancouver, BC Posts: 64 Thanks: 0 Thanked 0 Times in 0 Posts	Now I know this is repetative because you've presented the URL, but where did you find it? A __________________ Arlen ---------------------------------------------- Fabmedia Studios – Set yourself apart. http://www.fabmedia.com

16-05-2003, 02:31 AM	#8
beleg Registered User Join Date: Mar 2003 Location: TX Posts: 34 Thanks: 0 Thanked 0 Times in 0 Posts	Go to http://www.3dtotal.com, go to Free Stuff->Tutorials Click on the Project Overviews, and it's about the fifth one down.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode