How engine works....

kellyq · 25-10-2009, 02:45 PM

Hi I try to animate engine, here's what I've got

differential module

and some animations

Code:

http://odsiebie.com/pokaz/5928689---3835.html
http://odsiebie.com/pokaz/5334134---5bc0.html
http://odsiebie.com/pokaz/5832203---759b.html
http://odsiebie.com/pokaz/5581383---3749.html

spark plug

mizino · 26-10-2009, 03:10 AM

Ok my suggestion to you is to go to any model store and shell out about 20 bucks or so for an engine model. That will give you the basics of where everything is and where it goes. Right now you have the turbo chargers up in between the heads, I'm pretty sure you have a few too many pullies, plus there is no such thing as a V4 engine, it was tried but found to be a balance problem. Anyway i hope this helps. As far as the modeling goes its actually quite nice though none of those video links work.

phoelix · 05-11-2009, 01:48 AM

sorry the links are broken, at least are broken for me, cannot see :'(

kellyq · 05-11-2009, 07:42 PM

sorry, my video web hosting has some problems ( propably), I will try to rescue my file and upload it to another site as soon as posible

.........

and here's a frame from my intro with pistons and connections rods

kellyq · 08-11-2009, 09:15 PM

sorry, I lost my video

........................
little f/x

http://www.youtube.com/watch?v=cgpMRbfhPFg

//
and idea for logo animation
http://www.youtube.com/watch?v=40fUDUjV41k

25-10-2009, 02:45 PM	#1
kellyq Registered User Join Date: Sep 2008 Posts: 37 Thanks: 0 Thanked 0 Times in 0 Posts	How engine works.... Hi I try to animate engine, here's what I've got differential module and some animations Code: http://odsiebie.com/pokaz/5928689---3835.html http://odsiebie.com/pokaz/5334134---5bc0.html http://odsiebie.com/pokaz/5832203---759b.html http://odsiebie.com/pokaz/5581383---3749.html spark plug

05-11-2009, 01:48 AM	#3
phoelix Registered User Join Date: Feb 2005 Location: bogota Posts: 38 Thanks: 0 Thanked 0 Times in 0 Posts	sorry the links are broken, at least are broken for me, cannot see :'( __________________ www.joleanes.com

08-11-2009, 09:15 PM	#5
kellyq Registered User Join Date: Sep 2008 Posts: 37 Thanks: 0 Thanked 0 Times in 0 Posts	sorry, I lost my video ........................ little f/x http://www.youtube.com/watch?v=cgpMRbfhPFg // and idea for logo animation http://www.youtube.com/watch?v=40fUDUjV41k Last edited by kellyq; 11-11-2009 at 07:39 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

26-10-2009, 03:10 AM	#2
mizino Registered User Join Date: May 2005 Posts: 316 Thanks: 0 Thanked 0 Times in 0 Posts	Ok my suggestion to you is to go to any model store and shell out about 20 bucks or so for an engine model. That will give you the basics of where everything is and where it goes. Right now you have the turbo chargers up in between the heads, I'm pretty sure you have a few too many pullies, plus there is no such thing as a V4 engine, it was tried but found to be a balance problem. Anyway i hope this helps. As far as the modeling goes its actually quite nice though none of those video links work.

05-11-2009, 07:42 PM	#4
kellyq Registered User Join Date: Sep 2008 Posts: 37 Thanks: 0 Thanked 0 Times in 0 Posts	sorry, my video web hosting has some problems ( propably), I will try to rescue my file and upload it to another site as soon as posible ......... and here's a frame from my intro with pistons and connections rods

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)