Likwidmotive - Indiana Jones - Scarlet Jones

Likwidmotive · 06-04-2010, 02:09 AM

This is my first competition. I am aiming for a low poly mesh to be used for the UDK. I'll be Using Photoshop CS4, 3DStudio Max, Zbrush, and the Unreal development kit.

xxxcubanxxx · 06-04-2010, 02:57 AM

Welcome to the forums and good luck, hope to see more soon.

chunkymunky · 06-04-2010, 01:24 PM

Welcome to the forums.....beautiful concept sketch! Pretty cool start so far, hope to see some updates pretty soon

Cordero · 06-04-2010, 03:16 PM

Hi! I really love the sketch, it's awesome!

You said earlier, that you want to try out zspheres II.

http://www.pixologic.com/zclassroom/homeroom/

Check out this link. There is the section called "Sketching with ZSpheres Basics". I think it would help you a lot, if you are willing to move on to 3.5

Good luck with it!

Likwidmotive · 06-04-2010, 03:19 PM

Oh I know how to use them, but I have my limitations when it comes to certain parts like hands and such. Its just I'm not comfortable enough to jump right into a competition with what I know. But I may use them soon...like when I get back from school, I may just go to town with zbrush 3.5

Likwidmotive · 07-04-2010, 01:12 PM

I decided against zshperes II for this challenge, but if I finish early I may enter the sculpting challenge, so I'll use them then.

r0x_my_s0x · 07-04-2010, 01:28 PM

Good start man, biggest issue for me is her feet are TINY.

Likwidmotive · 07-04-2010, 02:22 PM

**** eh, you're right. There is a lot of work to be done with this. I had to redo the clothing, I was soooo pissed about that. The power went out and studio max didn't recover the file.

Likwidmotive · 09-04-2010, 02:40 AM

I didn't have much time to work on this today, but it might be interesting to see the steps.

chris_solo · 09-04-2010, 06:31 AM

great progress, keep it up

BiG ToE-3DT · 09-04-2010, 04:04 PM

you may want to take a good look at the feet. They have a pointy, boxy feel to them, maybe try rounding them out a bit. Also, and this could just be the angle, but the feel look as if they are being pulled down.

Likwidmotive · 09-04-2010, 04:43 PM

Hey thanks a lot man, i'm gonna be fixing it right now. The actual sculpting is going really well. I'm going beyond my original sketch, and adding things to the clothes, Which I think is going to make this mesh stand out.

hulahuga · 09-04-2010, 08:03 PM

THe concept looks ace.

Let see how this turns out

Likwidmotive · 10-04-2010, 07:04 PM

well I started sculpting this. I figured I'd show what I have thus far so when I post another one, you can see the difference. I am aware of the folds btw. This to me, is still a sketch. I go back and I polish everything in my work flow. It shows me what the mesh could look like.

hulahuga · 10-04-2010, 07:10 PM

Make sure the legs don't turn out to straight...

Larger screens would also be nice to see what is actually happening...

06-04-2010, 02:09 AM	#1
Likwidmotive Eater Of Babies Join Date: Dec 2008 Location: Ontario, Canada Posts: 28 Thanks: 0 Thanked 0 Times in 0 Posts	Likwidmotive - Indiana Jones - Scarlet Jones This is my first competition. I am aiming for a low poly mesh to be used for the UDK. I'll be Using Photoshop CS4, 3DStudio Max, Zbrush, and the Unreal development kit. Attached Images __________________ --------------------------------------------- Death is just an answer to a life long question http://adamdellow.deviantart.com/ --------------------------------------------- http://forums.3dtotal.com/showthread.php?t=75121

06-04-2010, 02:57 AM	#2
xxxcubanxxx Your Cuban Daddy Join Date: Jul 2007 Location: Austin, TX Posts: 2,159 Thanks: 149 Thanked 150 Times in 144 Posts Awards Showcase Total Awards: 6	Welcome to the forums and good luck, hope to see more soon. __________________ SKETCHES & WIPs PORTFOLIO

06-04-2010, 03:16 PM	#4
Cordero Registered User Join Date: Oct 2008 Location: Hungary Posts: 1,335 Thanks: 5 Thanked 16 Times in 15 Posts Awards Showcase Total Awards: 6	Hi! I really love the sketch, it's awesome! You said earlier, that you want to try out zspheres II. http://www.pixologic.com/zclassroom/homeroom/ Check out this link. There is the section called "Sketching with ZSpheres Basics". I think it would help you a lot, if you are willing to move on to 3.5 Good luck with it! __________________ WEBSITE

06-04-2010, 03:19 PM	#5
Likwidmotive Eater Of Babies Join Date: Dec 2008 Location: Ontario, Canada Posts: 28 Thanks: 0 Thanked 0 Times in 0 Posts	Oh I know how to use them, but I have my limitations when it comes to certain parts like hands and such. Its just I'm not comfortable enough to jump right into a competition with what I know. But I may use them soon...like when I get back from school, I may just go to town with zbrush 3.5 __________________ --------------------------------------------- Death is just an answer to a life long question http://adamdellow.deviantart.com/ --------------------------------------------- http://forums.3dtotal.com/showthread.php?t=75121

07-04-2010, 01:12 PM	#6
Likwidmotive Eater Of Babies Join Date: Dec 2008 Location: Ontario, Canada Posts: 28 Thanks: 0 Thanked 0 Times in 0 Posts	I decided against zshperes II for this challenge, but if I finish early I may enter the sculpting challenge, so I'll use them then. Attached Images __________________ --------------------------------------------- Death is just an answer to a life long question http://adamdellow.deviantart.com/ --------------------------------------------- http://forums.3dtotal.com/showthread.php?t=75121

06-04-2010, 01:24 PM	#3
chunkymunky General Monkey Join Date: Jan 2010 Location: Near Here Posts: 2,981 Thanks: 0 Thanked 0 Times in 0 Posts Awards Showcase Total Awards: 2	Welcome to the forums.....beautiful concept sketch! Pretty cool start so far, hope to see some updates pretty soon

07-04-2010, 01:28 PM	#7
r0x_my_s0x Character Artist Join Date: Feb 2009 Location: Scotland Posts: 61 Thanks: 0 Thanked 0 Times in 0 Posts	Good start man, biggest issue for me is her feet are TINY. __________________ Paul Large www.opifex.co.uk Character Artist- Ruffian Games

07-04-2010, 02:22 PM	#8
Likwidmotive Eater Of Babies Join Date: Dec 2008 Location: Ontario, Canada Posts: 28 Thanks: 0 Thanked 0 Times in 0 Posts	**** eh, you're right. There is a lot of work to be done with this. I had to redo the clothing, I was soooo pissed about that. The power went out and studio max didn't recover the file. __________________ --------------------------------------------- Death is just an answer to a life long question http://adamdellow.deviantart.com/ --------------------------------------------- http://forums.3dtotal.com/showthread.php?t=75121

09-04-2010, 02:40 AM	#9
Likwidmotive Eater Of Babies Join Date: Dec 2008 Location: Ontario, Canada Posts: 28 Thanks: 0 Thanked 0 Times in 0 Posts	I didn't have much time to work on this today, but it might be interesting to see the steps. Attached Images __________________ --------------------------------------------- Death is just an answer to a life long question http://adamdellow.deviantart.com/ --------------------------------------------- http://forums.3dtotal.com/showthread.php?t=75121

09-04-2010, 06:31 AM	#10
chris_solo looking for job... Join Date: Mar 2008 Location: France Posts: 1,369 Thanks: 0 Thanked 2 Times in 2 Posts Awards Showcase Total Awards: 6	great progress, keep it up __________________ always try to do better than last time! (sorry for my poor english!) ---> DW V - Deus ex machina Lightwave User Blender User

09-04-2010, 04:04 PM	#11
BiG ToE-3DT Reputation beyond repute Join Date: Feb 2005 Location: Chicago Posts: 8,608 Thanks: 136 Thanked 143 Times in 115 Posts Awards Showcase Total Awards: 14	you may want to take a good look at the feet. They have a pointy, boxy feel to them, maybe try rounding them out a bit. Also, and this could just be the angle, but the feel look as if they are being pulled down. __________________ Thighten Up The Graphics On Level 3 "something wrongI think" Threedy 4 Life I hate Justin Bieber every day

09-04-2010, 04:43 PM	#12
Likwidmotive Eater Of Babies Join Date: Dec 2008 Location: Ontario, Canada Posts: 28 Thanks: 0 Thanked 0 Times in 0 Posts	Hey thanks a lot man, i'm gonna be fixing it right now. The actual sculpting is going really well. I'm going beyond my original sketch, and adding things to the clothes, Which I think is going to make this mesh stand out. __________________ --------------------------------------------- Death is just an answer to a life long question http://adamdellow.deviantart.com/ --------------------------------------------- http://forums.3dtotal.com/showthread.php?t=75121

09-04-2010, 08:03 PM	#13
hulahuga Dr. Hula Join Date: May 2008 Location: Stockholm, Sweden Posts: 4,647 Thanks: 139 Thanked 136 Times in 130 Posts Awards Showcase Total Awards: 5	THe concept looks ace. Let see how this turns out __________________ What does the doctor ordain today? - Hmm... What about a shot... full of ideas! Currently using: Maya - Mudbox - ZBrush - Photoshop WIP Hula's 2D Sketchbook http://forums.3dtotal.com/p=777808 Hula's 3D Sketchbox http://forums.3dtotal.com/p=76693 Hula and Waska's Joint Project Thread http://forums.3dtotal.com/p=792813

10-04-2010, 07:04 PM	#14
Likwidmotive Eater Of Babies Join Date: Dec 2008 Location: Ontario, Canada Posts: 28 Thanks: 0 Thanked 0 Times in 0 Posts	well I started sculpting this. I figured I'd show what I have thus far so when I post another one, you can see the difference. I am aware of the folds btw. This to me, is still a sketch. I go back and I polish everything in my work flow. It shows me what the mesh could look like. Attached Images __________________ --------------------------------------------- Death is just an answer to a life long question http://adamdellow.deviantart.com/ --------------------------------------------- http://forums.3dtotal.com/showthread.php?t=75121

10-04-2010, 07:10 PM	#15
hulahuga Dr. Hula Join Date: May 2008 Location: Stockholm, Sweden Posts: 4,647 Thanks: 139 Thanked 136 Times in 130 Posts Awards Showcase Total Awards: 5	Make sure the legs don't turn out to straight... Larger screens would also be nice to see what is actually happening... __________________ What does the doctor ordain today? - Hmm... What about a shot... full of ideas! Currently using: Maya - Mudbox - ZBrush - Photoshop WIP Hula's 2D Sketchbook http://forums.3dtotal.com/p=777808 Hula's 3D Sketchbox http://forums.3dtotal.com/p=76693 Hula and Waska's Joint Project Thread http://forums.3dtotal.com/p=792813

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode